Knoll Systems Hdp410 Projector User Manual
Here you can view all the pages of manual Knoll Systems Hdp410 Projector User Manual. The Knoll Systems manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 2
2 FCC Warning Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limit s are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener ates, uses and can radiate radio frequency energy and, if not install ed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no...
Page 3
3 TABLE OF CONTENTS Safety Warnings 4 Introduction 5 Positioning the projector 7 Choosing the aspect ratio 8 Video connectors 8 Connecting a video device 9 Composite (RCA) video connection 9 S-video connection 9 Component (RCA) connection 9 SCART RGB connection 9 Digital connections 10 DVI connection 10 HDMI connection 10 Computer connections 10 RS-232 connections 10 Displaying an image 11...
Page 4
4 Important Operating Considerations for Safety • Place the projector in a horizontal position no greater than 15 degrees off axis. • Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. • Do not place the projector on a tablecloth or other soft covering that may block the vents. • Locate the projector at least 4 (1.2 m) away from any heating or cooling vents. • Use only Knoll-approved ceiling mounts. • Use only the power cord provided. A...
Page 5
5 Introduction Congratulations and thank you for your choice of a superior digital image projection device. Your new Knoll projector is specifically designed for home cinema applications. The projector sets a high standard using the latest DLP™ technology and new DNX video proc\ essing from Pixelworks™. This projector has 1920 x 1080 resolution (1080p). Whether you are watching movies or High Definition broadcasts or playing the latest video game, you will enjoy amazing image quality. The...
Page 6
6 M1-DA/DVI 12 VDC triggers RS-232 IR input HDMI Rear Connector Panel S-video Composite RCA Component video The projector provides the following connection options: • M1-DA/DVI (Digital Visual Interface) for DVI connection an M1-DA to DVI adaptor is required. • HDMI™ (High Definition Multimedia Interface) • Component (RCA) • SCART RGB (you must enable this...
Page 7
7 Setting up the Projector There are a number of factors to consider when determining where to set up the projector, including the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. But here are some general guidelines. NOTE: To ensure adequate cable access, do not place the projector within 6 inches (0.15 m) of a wall or other object. Position the projector on a flat surface (either on...
Page 8
8 HDP410 and HDP420 Projection Throw Distance 16:9 Video Screen: Screen Diagonal 92 103 106 110 122.5 146.75 Minimum Distance 149 166 171 178 198 237 Maximum Distance 178 199 205 212 237 284 Screen offset 16 18 19 20 23 26 Viewing Area 45x80 50.5x89.75 52x92 54x96 60x107 72x128 MAXIMUM DISTANCE TO SCREEN (16:9) = 1.935 x SCREEN DIAGONAL SIZE MINIMUM DISTANCE TO SCREEN (16:9) = 1.612 x SCREEN DIAGONAL SIZE SCREEN OFFSET (IMAGE DROP OR RISE) (16:9) = 0.177 x SCREEN DIAGONAL SIZE An interactive...
Page 9
9 Video Connectors Component RCA M1-DA/DVI 12 VDC triggers RS-232 IR input HDMI Rear Connector Panel S-video Composite RCA Component video The first step for connecting video is determining what type of output connectors your video Component RCA device has. If there is more than one output, select the one with the highest quality. The best quality ranking,...
Page 10
10 Composite (RCA) video connection Plug the composite video cable’s yellow connector into the video-out connector on the video device. Plug the other yellow connector into the yellow Composite connector on the projector. S-video connection If your video device uses a round, four-prong S-video connector, plug the S-video cable into the S-video connector on your video device and into the S-video connector on the projector. Component (RCA) connection If your device uses component connectors,...