Knoll Projector HDP410 HDP420 HDP460 User Manual

              
HDP410 
HDP420 
HDP460
 
      1080p DLP™ Projector               
       
        Users Manual v1.3
    

2 
FCC Warning 
Note: This equipment has been tested and found to c omply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits  are designed to provide reasonable protection again st 
harmful interference in a residential installation.  This equipment generates, uses and can radiate rad io 
frequency energy and, if not installed and used in  accordance with the instructions, may cause harmful  
interference to radio communications. However, ther e is no...

  3  
TABLE OF CONTENTS 
   
Safety Warnings            4  
Introduction              5 
Positioning the projector           7 
Choosing the aspect ratio          8  
Video connectors            8  
Connecting a video device          9  
  Composite (RCA) video connection      9 
  S-video connection          9 
  Component (RCA) connection        9 
  SCART RGB connection        9   
Digital connections            10  
  DVI connection            10   
  HDMI connection          10  
Computer...

4 
Important Operating Considerations for Safety   
  Place the projector in a horizontal position no gr eater than 15 degrees off axis. 
   Locate the projector in a well-ventilated area wit hout any obstructions to intake or 
exhaust vents.  
   Do not place the projector on a tablecloth or othe r soft covering that may block the vents.  
   Locate the projector at least 4 (1.2 m) away from  any heating or cooling vents. 
   Use only Knoll-approved ceiling mounts. 
   Use only the power cord...

  5  
Introduction 
  
Congratulations and thank you for your choice of a 
superior digital image projection device. Your 
new Knoll projector is specifically designed for ho me cinema applications. The projector sets a 
high standard using the latest DLP™ technology and  new DNX video processing from 
Pixelworks™. This projector has 1920 x 1080 resolut ion (1080p). Whether you are watching 
movies or High Definition broadcasts or playing the  latest video game, you will enjoy amazing 
image quality. The...

6 
  
               M1-DA/DVI 
      12 VDC triggers               RS-232     IR input 
                         HDMI 
    
Rear Connector Panel  
            
            
    S-video 
            
                  
        Composite RCA   Component video                                   
 
 
The projector provides the following connection opt ions: 
                  
• M1-DA/DVI (Digital Visual Interface) for DVI conn ection an M1-DA to DVI adaptor is required. 
• HDMI™ (High Definition Multimedia...

  7  
Setting up the Projector 
There are a number of factors to consider when dete
rmining where to set up the projector, 
including the size and shape of your screen, the lo cation of your power outlets, and the distance 
between the projector and the rest of your equipmen t. But here are some general guidelines. 
  
        NOTE:  To ensure adequate cable access, do not place the   
          projector within 6 inches (0.15 m) of a w all or other object. 
 
Position the projector on a flat surface...

8 
HDP410, HDP420 and HDP460 Projection Throw Distance 16:9 Video Screen: 
Screen Diagonal  92  103  106  110  122.5  146.75 
Minimum Distance  149  166  171  178  198  237 
Maximum Distance 178  199  205  212  237  284 
Screen offset  16  18  19  20  23  26 
Viewing Area  45x80 50.5x89.75 52x92 54x96 60x107 72x128 
MAXIMUM DISTANCE TO SCREEN (16:9) = 1.935 x SCREEN  DIAGONAL SIZE 
MINIMUM DISTANCE TO SCREEN (16:9) = 1.612 x SCREEN  DIAGONAL SIZE 
SCREEN OFFSET (IMAGE DROP OR RISE) (16:9) = 0.177 x...

  9  
  
Video Connectors          
Component RCA 
  
                M1-DA/DVI 
      12 VDC triggers               RS-232     IR input 
                         HDMI 
    
Rear Connector Panel  
            
           
    S-video 
            
                   
        Composite RCA   Component video                                   
 
  
The first step for connecting video is determining  what type of output connectors your video 
Component RCA device has. If there is more than one  output,...

10 
Composite (RCA) video connection 
Plug the composite video cable’s yellow connector into the video-out connector on the video 
device. Plug the other yellow connector into the ye llow Composite  connector on the projector. 
 
S-video connection 
If your video device uses a round, four-prong S-vid eo connector, plug the S-video cable into the 
S-video connector on your video device and into the  S-video  connector on the projector. 
 
Component (RCA) connection 
If your device uses component...