Knoll Projector HD102 User Manual

 21
• Select a different standard if necessary. See page 23. 
• Make sure your DVD player is set for a 16:9 television. See your DVD player’s user’s guide for 
instructions. 
 
Customizing the projector 
 
You can customize the projector for your specific setup and needs. 
 
• For rear projection, turn rear mode on in the Settings>System menu. 
• For ceiling mounted projection, turn ceiling mode on in the Settings> System menu. 
• Specify which source the projector checks first for active video during...

 22
Picture menu 
 
To adjust the following settings, 
highlight the setting, press  
Select, use the up and down 
arrows to adjust the values, then 
press Select to confirm the 
changes. 
 
Keystone: adjusts the image 
vertically and makes a squarer 
image. You can also adjust 
keystone from the keypad. 
Contrast: controls the degree of difference between the lightest and darkest parts of the picture and 
changes the amount of black and white in the image. 
Brightness: changes the intensity of the...

 23
CCS: (Cross-Color Suppression) processes the signal to remove any color information from the luma portion 
of the signal. It is On for all composite signals, and can be turned off for S-video and interlaced component 
signals. 
 
 
 
Sharpness: (video sources only) changes the 
clarity of the edges of a video image. Select a sharpness 
setting.     
 
 
 
Color Space: This option applies to computer  
and component video sources. It allows 
you to select a color space that has been  
specifically...

 24
Settings menu 
 
Audio: allows adjustments to Volume of the internal speaker and allows a 
chime to play when starting the projector. 
Adjustments can also be made from the projector’s 
keypad and the remote. 
 
Sources: determines which source the projector 
checks first for active video during power-up. When 
Autosource is selected, the Source Enable 
feature indicates which sources the projector 
attempts to lock onto. You can use the Source 
Enable feature to eliminate certain sources from 
this...

 25
Service: To use these features, highlight them and press 
Select.  
 
Factory Reset: restores all settings to their default. 
Lamp Reset: resets the lamp hours used counter in the About 
menu to zero. Do this only after changing the lamp. 
 
 
Service Code: only used by authorized service personnel. 
About: provides information about the projector and the 
active source.  
 
Maintenance 
Cleaning the Lens 
1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.  
• Avoid using an excessive...

 26
WARNING: 
 
To avoid burns, allow the projector to cool for at least 30 minutes before you replace the lamp. 
 
Do not drop the lamp housing or touch the glass bulb! The glass may shatter and cause injury. 
 
Be extremely careful when removing the lamp housing. In the unlikely event that the bulb ruptures, small 
glass fragments may be generated. The lamp housing is designed to contain these fragments, but use 
caution when removing the lamp housing. Before replacing the lamp, clean the lamp...

 27
Appendix 1: HD102 Projection Throw Distance (16:9 Aspect Screen)  
Screen 
Diagonal 92 103 106 110 122.5 146.75 
Minimum 
Distance 139.5 156.1 160.7 166.7 185.7 222.5 
Maximum 
Distance 167.2 187 192.5 200 222.7 266.8 
Screen 
offset 7.3 8.2 8.4 8.8 9.8 11.7 
Viewing 
Area 45x80 50.5x89.7552x9254x9660x107 72x128 
 
Maximum distance to 
screen (16:9) = 1.818 x 
Screen diagonal size 
 
Minimum distance to 
screen (16:9) = 1.516 x 
Screen diagonal size 
 
Screen offset (image 
drop or rise) = 0.08 x...

 
28
LIMITED WARRANTY 
 
Knoll Systems, Inc. (“Knoll”) warrants that each  HD102 (“the Product”) sold hereunder will conform to and 
function in accordance with the writt en specifications of Knoll. Said limited warranty shall apply only to the 
first person or entity that purchas es the Product for personal or busi ness use and not for the purpose of 
distribution or resale. Said warranty shall continue fo r a period of two (2) years from the date of such 
purchase. The standard limit ed warranty...