KitchenAid A9 Manual
Here you can view all the pages of manual KitchenAid A9 Manual. The KitchenAid manuals for Coffee Grinder are available online for free. You can easily download all the documents as PDF.
Page 11
9 How the Grind Affects Flavor The flavor of coffee depends on a variety of factors, including the quality, freshness, and roast of the beans, the purity of the brew water, the cleanliness of the brewing equipment, and the brewing temperature. The fineness and consistency of the grind is also critical. Coffee that is ground too fine for a particular brewing process – using too fine of a grind in a drip coffee maker, for example – will result in the brew water over-extracting the oils and aromatic...
Page 12
10 Care and Maintenance IMPORTANT: •Make sure the Coffee Mill is switched “Off” and unplugged before cleaning. •Do not immerse motor housing in water. •Do not use abrasive cleaners or scouring pads. •Never immerse the cutting burrs, burr-shaft assembly, or face-plate assembly in water. Keep them dry at all times. Cleaning the Coffee Mill 1. Loosen and scrape leftover grinds from the grinding spout with the cleaning tool after each use. 2. Wipe the motor housing and cord with a clean damp cloth. 3. Dry...
Page 13
To reassemble: 1. After cleaning, align the keyed burr-shaft assembly with the motor shaft. Lower the burr-shaft assembly onto the motor shaft and rotate until the burr-shaft assembly falls into place inside the motor housing. 2. Place the grind-adjustment ring onto the motor housing. Press and turn the grind-adjustment ring clockwise several rotations until the gear offers complete resistance, then rotate it counterclockwise until the selection arrow aligns with the initial “M” for the Medium grind...
Page 14
12 4. Attach the replacement burrs to the burr-shaft assembly and the grind-adjustment ring with the burr-mounting screws. Make certain the cutting surfaces of the burrs face outward (see the illustration above), and the burr- mounting screws are tight. 5. Insert the burr-shaft assembly into the motor housing and attach the grind-adjustment ring. For instructions, see “To reassemble”, page 11, steps 1-3. Replacing the Cutting Burrs If the cutting burrs are damaged, or have reached the end of their life...
Page 16
® Registered Trademark/™Trademark of KitchenAid, U.S.A. ©2005. All rights reserved. (4380dZw205) FOR THE WAY IT’S MADE.™ ® 9707030 Rev. C
All KitchenAid manuals