Kimber 8400 Bolt Action Sport Rifle Instructions Manual

							Kimber Service Policy
Kimber Mfg., Inc. does not recommend and is not responsible for any
alteration or modification to the rifle not made by Kimber factory personnel,
nor the replacement of worn or damaged parts with those not manutactured
by Kimber Mfg., Inc. We reserve the right to refuse service on firearms that
have been altered, added to or substantially changed. 
Every rifle is carefully inspected and test fired for function and accuracy
before ship ment to insure that is leaving the factory in perfect condition and
fully conforms to our specifications and standards. Should damage occur
enroute, or if there are any questions regarding its performance, please call,
Fax, Email or write our Customer Service department in Yonkers, NY and
fully describe the problem encountered. 
Warranty
This limited warranty has been drafted to comply with the Magnuson-Moss
Warranty Federal Trade Commission Improvement Act which is effective
for goods manufactured on or after December 31, 1995. 
Kimber Mfg., Inc. firearms are warranted to be free from defects in
material and workmanship for one year after the date of original new gun
retail purchase. The manufacturer agrees to correct by repair or replacement
(with the same or comparable quality model) your firearm, without charge,
if returned prepaid with a copy of the bill of sale. 
Kimber Mfg., Inc. assumes no responsibility for product malfunction or
for physical injury or property damage resulting in whole or in part from
criminal or negligent use of the product, improper or careless handling,
unauthorized modifications, use of defective, improper, hand-loaded
ammunition, customer abuse or neglect of the product, or other influences
beyond Kimber Mfg., Inc.s control. This warranty does not apply to normal
wear of any parts, including metal, wood, plastic, rubber and other materials
surface finish or if unauthorized repair and/or alteration has been performed. 
This warranty does not cover repairs related to unreasonable use, corrosion,
failure to provide proper maintenance, damaged or shopworn display guns,
gun barrels damaged by an obstructed bore or guns damaged in return
shipment due to improper packing and handling. 
21 
						

							Kimber Mfg., Inc. reserves the right to inspect any product before making
any adjustment covered by this warranty. 
Under no circumstances shall Kimber Mfg., Inc. be liable for incidental or
consequential damages with respect to economic loss or injury or property
damage whether the result of breach of express or implied warranty. Some
states do not allow the exclusion of consequential or incidental damages so
the limitation may not apply to you. This warranty gives only the original
retail purchaser specific legal rights. Other rights may also be available
which may vary from state to state. 
The terms of this warranty cannot be changed except in writing by an
officer of Kimber Mfg., Inc. 
The Kimber Factory at: 1 Lawton Street, Yonkers, NY 10705 is the only
authorized repair location.
Instructions for Ordering Parts
Please provide model number/name, part number and part name. Supply
serial number and caliber of gun. Identify parts from list, or exploded view.
Parts being made to close dimensions, may require slight adjustment or
fitting to insure proper function of the firearm.
Please note that some parts are marked restricted - these parts can only be
ordered and mailed to gunsmiths with FFLs on record.
Send part orders directly to;
Kimber Mfg. Inc.
Parts Departmcnt
1 Lawton Street
Yonkers, NY 10705
22 
						

							Instructions for Factory Service
Return firearms to Kimber Mfg., Inc. for factory service only upon
authorization by Kimber customer service personnel. A return authorization
number will be assigned to every authorized firearm return. 
Please package your firearm carefully. Ship firearm in original shipping
container with proper cushioning material to prevent movement of gun or
parts. Gun cases are especially recommended for return shipping. Clearly
mark forwarding and return address on the outside of the package as well as
on attached letter.
Securely attached complete letter to outside of each package returned to the
factory. Include also inside the package a copy of the same letter. The
contents of the letter must include: your name, complete mailing address,
your telephone number, serial number of firearm and a complete description
of the problem.
Please do not return gun accessories such as sling straps, quick release
swivels, telescopes, mounts or any other special equipment to the factory
with the gun shipment. Identify complete condition of firearm and contents
- any parts missing or damaged. 
To avoid delays please do not include part orders with repair instructions. 
Unless otherwise specified return shipments will be made by UPS. Kimber
gun parts are not interchangeable with those of any other make. For this
reason Kimber cannot service any gun not of its manufacture.
Before packaging guns for return to the factory, all ammunition must be
removed.
Please send repairs directly to: 
KMI
Warranty Repairs
1 Lawton St.
Yonkers, NY 10705
23 
						

							Kimber Mfg., Inc.
1 Lawton Street
Yonkers, NY 10705
Sales - Telephone - 888-243-4522
Customer service - Telephone - 914-964-0771
Customer service - Fax - 914-964-9340
Web address: www.kimberamerica.com
08/03 - 1100321