Keurig 20 K400 Instruction Manual

2 1 
SAVE
KEURIG BREW #2
STRONG
SETTINGSPREFERRED BREW SETTINGSWALLPAPER
TEMPERATURE
2 OF 3
SAVE
K-CUP SETTINGS
STRONG
HOT COCOA OTHER
SAVE
K-CARAFE SETTINGS
PREFERRED BREW SETTINGSK-CUP
1 OF 3
PREFERRED BREW SETTINGS
The PREFERRED BREW SETTINGS menu allows you to change the default settings for each Keurig Brew number. 
Use the back button to return to the SETTINGS menu.
K-Cup® Settings: Adjust the brew size, enable STRONG or HOT COCOA/OTHER. 
Press SAVE to confirm or use the back button to return to...

2 2 
SETTINGS MENU
SAVE
KEURIG BREW #5 (STEP 2)
STRONG
PREFERRED BREW SETTINGS
2 OF 3
PREFERRED BREW SETTINGS
3 OF 3
SAVE
KEURIG BREW #3
SAVE
KEURIG BREW #4
STRONG
Keurig Brew #3: Adjust brew size. 
Press SAVE to confirm or use the back button to return to the SETTINGS menu.
Keurig Brew #4: Adjust brew size and enable STRONG.
Press SAVE to confirm or use the back button to return to the SETTINGS menu.
Keurig Brew #5: Enable/disable STRONG for brewing 2-STEP beverages.
Press SAVE to confirm or use the...

2 3 
SETTINGSPREFERRED BREW SETTINGS
2 OF 3
WALLPAPER
TEMPERATURE
1 OF 4
WALLPAPER
CONFIRM SELECTION
SAVE
WALLPAPER
You can customize your Touch-screen color. Simply press a color window to select a WALLPAPER for the home screen.
Confirm Selection: Press SAVE to CONFIRM SELECTION or use the back button to return to the WALLPAPER menu.
back button
SAVEMEDIUM
BREW TEMPERATURESETTINGS
2 OF 3
PREFERRED BREW SETTINGS WALLPAPER
TEMPERATURE
TEMPERATURE
The TEMPERATURE setting provides even more control over the...

2 4 
SAVE
HIGH ALTITUDE
ENABLE
SETTINGSHIGH ALTITUDE
WATER FILTER REMINDER
RESTORE FACTORY SETTINGS
3 OF 3
SAVE
WATER FILTER REMINDER
ENABLE
SETTINGSHIGH ALTITUDE
3 OF 3
WATER FILTER REMINDER
RESTORE FACTORY SETTINGS
YES
NO
RESTORE FACTORY SETTINGS
ARE YOU SURE YOU WANT
TO RESTORE SETTINGS TO FACTORY DEFAULTS?
SETTINGS
3 OF 3
HIGH ALTITUDE
WATER FILTER REMINDER
RESTORE FACTORY SETTINGS
ENABLE WATER FILTER REMINDER
If you are using a Keurig® Water Filter, select ENABLE to activate the WATER FILTER...

25
CLEANING THE BREWER EXTERIOR
Keep your Keurig® Plus Series brewer looking its best by cleaning the exterior from time to time. Just clean with  a damp, soapy, lint-free, non-abrasive cloth. Never immerse  the brewer in water or other liquids. 
CLEANING THE DRIP TRAY
The Drip Tray can accumulate up to 8 ounces of overflow.  The Drip Tray and the Drip Tray Plate should occasionally be rinsed clean. To remove the Drip Tray, simply slide it toward  you, keeping it level at all times to avoid spilling....

26
CARING FOR YOUR BREWER
3. Pull out the Pod Holder Assembly (1) and Base (2).
CLEANING THE POD HOLDER1.  Lift the Handle.2. Push up while grabbing the sides of the Pod Holder Assembly. Pull away from  the brewer.CAUTION: Sharp needles. Do not put fingers in chamber.
4. Press the release buttons on both sides of the Pod Holder Assembly.  

27
5. Separate the Pod Holder from  the Housing.6. Clean the Pod Holder (1), Housing (2), and Base (3) with a damp, soapy,  lint-free, non-abrasive cloth and  rinse thoroughly.
8. Place the Base, then the Pod Holder Assembly into the Brew Head.  Lower the Handle.CAUTION: Sharp needles. Do not put fingers in chamber.
8. After all pieces are cleaned, reassemble the Pod Holder Assembly by inserting the Pod Holder back into the Housing.
2 | TIPS & MAINTENANCE  

28
CARING FOR YOUR BREWER: HOW TO USE A BREWER MAINTENANCE ACCESSORY
x
CLEANING THE BREWER  ENTRANCE NEEDLEHaving trouble brewing? You may havecoffee grounds stuck in the brewer’s Entrance Needle. Use a paper clip to clean both holes of the exit needle. You may have to tilt the brewer to get a better view. Please remember the needles are sharp, so proceed with caution.NOTE: Please reach out to Keurig customer service to get a Brewer Maintenance Accessory if you desire
1. Please ensure the brewer is...

29
CARING FOR YOUR BREWER: HOW TO USE A BREWER MAINTENANCE ACCESSORY
4. Remove Brewer Maintenance Accessory from Pod Holder.Warning: Avoid sharp needles.
5.  Once you have removed the Brewer Maintenance Accessory from the brewer, power the brewer back on.
7.  Brew your favorite Keurig® beverage  and enjoy! 6. Place a 12 ounce mug on the Drip Tray and perform an 8 ounce cleansing brew (refer to page 11).
If you do not have this accessory please contact Keurig customer service at 1.866.901.BREW (2739).
2 |...

3 0 
CARING FOR YOUR BREWER
CLEANING THE EXIT NEEDLE1. If a clog arises in the Exit Needle, push the lever of the Pod Holder to reveal the Exit Needle.
2. Use a paper clip or similar tool to  loosen the clog. Rinse thoroughly with hot water.
3.  After all the pieces are cleaned, place the Base then the Pod Holder assembly into the Brew Head. Lower the Handle.CAUTION: Sharp needles. Do not put fingers in chamber.