Kenwood M505usb Manual

							EN21
.64#@&/@SJOEE


.64#@&/@SJOEE






1.



1. 
						

							22 EN
In case of diffi  culty
USB operation“NO USB” is displayed.
\  Insert the USB device properly.
Cannot play.
\  The USB device is removed during playing or 
recording. Record songs again after formatting 
the USB device.
Radio receptionNoise in radio.
\  Tune to a correct frequency.
\  Adjust the direction of the FM antenna.
\  Adjust the position and direction of the AM 
antenna.
\  Increase the distance between the system and 
TV or VCR.
Cassette deck operationCannot record.
\  Replace the tape or cover tabs with adhesive 
tape.
\  Clean the head.
\  Use only NORMAL (IEC I) tape.
\  Do not use a cassette with more than 90-
minute recording time, for the tape used in 
such a cassette is very thin and tends to cause 
problem such as entanglement around the 
pinch roller or could be easily cut off .
Remote control unitDoes not function properly.
\  Replace the batteries.
\  Remove the obstacles.
\  Move closer to the system when using the 
remote control and make sure that you are 
pointing at unit’s remote sensor.
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be 
operated, or shows an erroneous display) if the power 
cord is unplugged while the power is ON, or due to 
some other external factor. If this happens, execute 
the following procedure to reset the microcomputer 
and return the unit to its normal operating condition.
When the power is on and TUNER input is 
selected, press and hold down the (7 stop) button 
on the unit for more than 2 seconds.
Unplug the AC cord and plug it back in if “INIT.OK” 
is appears. 
•  Please note that resetting the microcomputer will clear the 
contents of the memory and return the unit to the state it 
was in when it left the factory.
Check that following guide for problem resolution.
GeneralNo sound.
\  Plug in AC cord securely.
\  Set the VOLUME control to proper sound level.
\  Make sure the source is set to the source you 
want to operate.
\  Pull out the headphones plug from the 
headphones jack.
The left and right sound outputs are reverse.
\  Check the speaker connections and location.
The system displays features automatically.
\ Switch off   the demo operation.
The system does not operate by pressing any 
buttons.
\  Unplug the AC cord and plug it back in.
CD player operation“NO DISC” is displayed.
\  Insert a disc correctly (label side up).
\  Clean the disc.
\  Use a new or readable disc.
\  Wait until the moisture condensation at the 
lens has cleared.
.64#@&/@SJOEE


.64#@&/@SJOEE






1.



1. 
						

							EN23
Specifi cations
Main unit
Amplifi er sectionRated output power
   ..............................30 W + 30 W (1 kHz, 10% T.H.D., at 4 Ω)
Tuner sectionFM tuner section
Tuning frequency range
   ......................................................................87.5 MHz ~ 108 MHz
AM tuner section
Tuning frequency range
   .......................................................................531 kHz ~ 1,602 kHz
CD player sectionLaser .....................................................................Semiconductor  laser
Over sampling ............................................................ 8 fs (352.8 kHz)
Laser wave length ...................................................... 760 ~ 800 nm
Laser power class .............................................................Class 1 (IEC)
D/A conversion .................................................................................. 1 Bit
USB interfaceUSB standard ....................................................................... USB 1.1/2.0
Maximum supply current .................................................... 500 mA
File system ...................................................................... FAT 12/ 16/ 32
MP3 decode
 ........................ Compliant with MPEG-1/2 Audio Layer-3
WMA decode
 ........................ Compliant with Windows Media Audio 9
Recording format
 ...............................................................MP3, 128 kbps/44.1 kHz
Cassette deck sectionTrack ........................................................... 4-track, 2-channel stereo
AUX sectionInput (Sensitivity/ Impedance)
 ..................................................................................1000 mV/10 kΩ
GeneralPower consumption ..................................................................... 75 W
Dimensions ....................................................W : 160 mm (6-5/16”)
    H : 269 mm (10-9/16”)
    D : 345 mm (13-15/16”)
Weight (net) .................................................................. 5.5 kg (11.7 lb)
Speakers
Enclosure ..................................................................... Bass-refl  ex  type
Speaker confi guration
  Woofer ........................................................ 100 mm, cone type
  Tweeter ......................................................... 35 mm, cone type
Impedance ............................................................................................. 4  Ω
Maximum input level ................................................................... 60 W
Dimensions ................................................... W : 160 mm (6-5/16”)
    H : 268 mm (10-9/16”)
    D : 218 mm (8-9/16”)
Weight (net) ................................................ 2.2 kg (4.9 lb) (1 piece)
Notes:•  Kenwood follows a policy of continuous advancements in 
development. For this reason specifi cations may be changed 
without notice.
• Suffi  cient performance may not be exhibited at extremely 
cold locations (where water freezes).
.64#@&/@SJOEE


.64#@&/@SJOEE






1.



1. 
						

							24 EN
For your recordsRecord the serial number, found on the back of the unit, 
in the spaces designated on the warranty card, and in the 
space provided below. Refer to the model and serial numbers 
whenever you call upon your dealer for information or service 
on this product.
Model   Serial Number   
Information on Disposal of Old Electrical 
and Electronic Equipment (applicable for EU 
countries that have adopted separate waste 
collection systems)
Products with the symbol (crossed-out 
wheeled bin) cannot be disposed as 
household waste.
Old electrical and electronic equipment should 
be recycled at a facility capable of handling 
these items and their waste byproducts.
Contact your local authority for details in locating a recycle 
facility nearest to you.
Proper recycling and waste disposal will help conserve 
resources whilst preventing detrimental eff ects on our 
health and the environment.
.64#@&/@SJOEE


.64#@&/@SJOEE






1.



1.