Kenwood Dvt 7300 Instruction Manual

							DVR-6300 (EN/K,P,E,X)
41MP3/WMA /JPEG media playback
Operations
Note Note
0
MP3 /WMA program playback (fl)
You can listen to the desired files of the current MP3/WMA disc in any desired order.
Program Edit
Program edit screen appears.
To repeat program play
During program playback, press the REPEAT
key on the remote.
Each press the key switches the mode.
1TRACK  : repeats the current file.
2ALL  : repeats all the files on programmed list.
3OFF
If you press SKIP (¢) once during Repeat Track
playback, the repeat playback cancels.
Delete a track from Program list
1Press the Cursor up/down (5/∞) keys to select
the file that you wish to delete from the Pro-
gram list.
2Press CLEAR key.
1Select “Clear All” icon, then press ENTER key.
The complete program for the disc is deleted.
Delete the complete Program list
÷The programs are also cleared when the disc is removed.
1Insert a disc and close the tray.
2Press P.MODE key  to enter the Program edit
mode.
5You can select maximum 30 values by repeating
step 3 - 4.
6Press Cursor right (3) key.
The programmed track you selected last is highlighted on
the program list.
7Select the track you want to start playing on the
Program list.
3Select specific file by press Cursor up/down (5/
∞) keys.
4Press ENTRE key  to register selected value
onto Program list.
8Press PLAY key to start.
Playback begins in the order in which you programmed
files. Playback stops after all of the files on the Program
list have played once. ÷Press TOP MENU  to move to the next page.
÷Press MENU to move to the previous page.
*5476/38-42/EN04.7.27, 2:06 PM 41
 
						

							DVR-6300 (EN/K,P,E,X)
42MP3/WMA /JPEG media playback
Operations
Other function
You can set this receiver to turn off automatically at
a specified time.
Press SLEEP key on the remote to set the desired
sleep time.
The SLEEP indicator and sleep time appears in the dis-
play window.
÷Each time you press SLEEP key the setting changes in the
following order.
÷You can check the time remaining before the DVD/
CD receiver turns off.
Press SLEEP key. The remaining time appears in the display
window.
Sleep Timer
The display brightness of the main unit can be
changed.
Press the DIMMER key to dim or bright.
DIMMER function
*5476/38-42/EN04.7.27, 2:06 PM 42
 
						

							43
DVR-6300 (EN/K,P,E,X)
Knowledge
In case of difficulty
Operation to reset
What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the
table below to see if the problem can be corrected before seeking help from your dealer or service representative.
The microprocessor may fall into malfunction (impossibility to operate erroneous display, etc.) when the power
cord is unplugged while power is ON or due to an external factor.
In this case, switch off the power, wait for several seconds, and then switch the power on again.
÷Connect properly referring to “System con-
nections”.
÷Switch MUTE OFF.
÷Unplug the headphone plug.
÷Connect properly referring to “System con-
nections”.
÷Connect antennas.
÷Select a band.
÷Tune to the frequency of the desired sta-
tion.
÷Install the outdoor antenna in an apart posi-
tion from the road.
÷Switch the suspected electric appliance OFF.
÷Install the TV or the system at an increased
distance between them.
÷Preset stations with tunable frequencies.
÷Preset stations again.
÷Select Surround with the LISTEN MODE
key. ÷The speaker cords are disconnected.
÷The MUTE key of remote control unit is switched
ON.
÷The headphone plug is inserted into the jack.
÷The speaker cords are disconnected.
÷The antennas have not been connected.
÷A proper broadcasting band has not been se-
lected.
÷The frequency of the station to be received is
not tuned.
÷Car ignition noise.
÷Influence of an electric appliance.
÷A TV set is installed near the system.
÷The frequency of the preset station is not
tunable.
÷The preset memory has been cleared because
the power cord has been unplugged for a long
period.
÷The LISTEN mode is STEREO.Sound is not produced.
Sound is not produced from the left
or right speakers.
Radio stations cannot be received.
Noise interferes.
A station has been preset but it can-
not be received by pressing the PRE-
SET key.
No sound from the surround speakers
Remedy Cause Symptom
Receiver, speakers
9
¢
¢
9
0
∞
∞
0
§
¡
Remote control unit
Remote control operation is not possible.÷Batteries are exhausted.
÷The remote control is too far away from the
system, the controlling angle is deviated or
there is an obstacle in between.÷Replace with new batteries.
÷Operate the unit inside the remote control-
lable range.
Remedy Cause Symptom
*5476/43-48/EN04.7.27, 2:06 PM 43
 
						

							44
DVR-6300 (EN/K,P,E,X)
Knowledge
Playback does not start when the 3 key is
pressed.
Playback starts but no image/sound is seen
heard.
The picture is disrupted when the image is
fast forwarded or fast reversed.
No sound is heard.
No picture is displayed.
The picture does not look good or the pic-
ture/sound quality is poor.
It takes a while for the disc to start playing.
The tray opens automatically.
The top and bottom of the screen cannot be
seen, or the screen becomes black-and-
white.
The subtitle is not displayed.
The voice (or subtitle) language cannot be
changed.
The viewing angle cannot be changed.÷Load a disc and press the 3 key.
÷Turn the disc over and properly place it on
the disc tray.
÷Turn on the TV.
÷Properly reconnect the connection cords.
9
÷This is not a malfunction.
÷Set the sound volume to an appropriate
level.
÷Press the 3 key to resume normal play-
back mode.
÷Return to interlaced mode is made when
the 7 (stop) key is pressed for at least 5
seconds.
÷Separate this unit as far as possible from
the device you think is generating the
noise.
÷Refer to the Disc handling precautions
section and wipe dirt from the disc.
8÷Use a new disc.
÷Refer to the Caution on condensation sec-
tion and evaporate the condensation.8
÷Approximately 10 to 20 seconds are re-
quired for a disc to start playing, although
the time differs depending on the disc.
÷Properly place the disc on the tray.
÷Refer to the Video formats section ,and
use a disc with the appropriate video for-
mat for your TV or a TV with the appropriate
video format for the disc.
7
÷The subtitle cannot be displayed when the
DVD disc being played does not contain
the recording of subtitles.
÷Press the SUBTITLE key to switch on the
subtitle mode.
¤
÷The voice (or subtitle) language cannot be
changed when the DVD disc being played
does not contain the recording of more
than one voice (or subtitle) language.
÷The viewing angle cannot be changed
when the DVD disc being played does not
contain the recording of more than one
angle.
÷More than one viewing angle may be re-
corded only in limited sections in a disc. ÷There is no disc in the player.
÷There are no signals recorded on the side of
the disc being played.
÷The TV is not turned on.
÷The connection cords are not properly con-
nected.
÷The picture is slightly disrupted during fast
forward and fast reverse operations.
÷The volume control of the TV or amplifier is
not adjusted properly.
÷The player is in a special playback mode.
÷Setting to progressive mode has been done
for a TV not compatible with progressive
mode.
÷A nearby device is generating noise.
÷The disc is dirty.
÷The disc is damaged.
÷There is condensation on the optical lens.
÷Time is required for the unit to detect the
disc type and size and for the rotation of the
motor to stabilize. This is not a malfunction.
÷The disc is not placed horizontally.
÷The video format of the disc being played
does not match that of the connected TV
monitor.
÷The DVD disc being played does not contain
the recording of subtitles.
÷The subtitle mode is set to off.
÷The DVD disc being played does not contain
the recording of more than one audio (or sub-
title) language.
÷The DVD disc being played does not contain
the recording of more than one angle.
÷You are attempting to switch the angle in a
DVD section where more than one angle is
not recorded.
Remedy Cause
DVD player unit
Symptom
In case of difficulty
*5476/43-48/EN04.7.27, 2:06 PM 44
 
						

							45
DVR-6300 (EN/K,P,E,X)
Knowledge
÷A viewing restriction (PARENTAL) has been
set for the disc.
÷You have forgotten the password.
÷The DVD disc being played does not contain
the recording of the selected voice or subtitle
language.
÷The initial playback language is specified by
the DVD disc.
÷The DVD specifications provide for selection
at the menu screen.
÷The menu language function (MENU) is not
set to desired language.
÷The VCD disc being played is not compatible
with P.B.C.
÷The operation is inhibited. Please try an-
other operation.
The inhibition icon is displayed
and remote control is not pos-
sible.÷Playback is restricted intentionally by the
software producer.
DVD player unit
÷Check the viewing restriction level (PA-
RENTAL) setting.
÷Set the initial setup to the factory setup
with the following procedure.
1Press the SETUP key on the remote to
display the Setup menu.
2Input the 6-digit number 210499 and
the security code is cleared.
3Enter a new code.
÷Use a DVD disc containing the recording of
the selected voice or subtitle language.
÷Press SUBTITLE or the AUDIO key on the
remote and select the language.
÷Select at the menu screen of the disc.
÷Select disc menu language.‹
÷Menu playback is available only with VCD
discs recorded with P.B.C. Playback will not start even after a title is se-
lected.
The parental  level cannot be changed.
The voice or subtitle language selected in the
initial setting is not played.
Menu screen messages are not shown in the
desired language.
A VCD cannot be played using menus.
Remedy Cause Symptom
Remedy Cause Symptom
In case of difficulty
¤
This product incorporates copyright protection technol-
ogy that is protected by U.S. patents and other intellec-
tual property rights. Use of this copyright protection tech-
nology must be authorized by Macrovision, and is in-
tended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse en-
gineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPAT-
IBLE WITH THIS PRODUCT AND MAY CAUSE ARTI-
FACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE CON-
NECTION TO THE STANDARD DEFINITION OUTPUT.
IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525P DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
Inhibition icon
*5476/43-48/EN04.7.27, 2:06 PM 45
 
						

							46
DVR-6300 (EN/K,P,E,X)
Knowledge
Notes
Notes
Specifications
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may
be changed without notice.
÷Sufficient performance may not be exhibited at extremely cold locations (Where water freezes).
Main unit
[ Amplifier section ]
Effective output power during STEREO operation
1 kHz, 10 % T.H.D. at 8 Ω...................................55 W + 55 W
Effective output power during SURROUND operation
Front (1 kHz, 10 % T.H.D. at 8 Ω, one channel driven)
......................................................................... 55 W + 55 W
Center 
(1 kHz, 10 % T.H.D. at 8 Ω, one channel driven) ...55 W
Surround (1 kHz, 10 % T.H.D. at 8 Ω, one channel driven)
......................................................................... 55 W + 55 W
Subwoofer (100 Hz, 10 % T.H.D. at 4 Ω, one channel driven)
.................................................................................... 100 W
Input sensitivity / impedance
VIDEO 1 / VIDEO 2 .................................... 650 mV / 47 kΩ
Output level / impedance
VIDEO 1 ............................................................. 1 V / 100 Ω
[ Digital audio section ]
Input level / impedance / wave length
Optical (VIDEO1 / VIDEO2) ..... -21 dBm ~ -15 dBm, 660 nm
[ Tuner section ]
FM tuner section
Tuning frequency range ...................... 87.5 MHz ~ 108 MHz
AM Tuner section
Tuning frequency range (for Europe and Australia)
............................................................. 522 kHz ~ 1,611 kHz
Tuning frequency range (for U.S.A. and Canada)
............................................................. 530 kHz ~ 1,720 kHz
[ DVD/CD/VIDEO CD player section ]
Signal read system ................................ Semiconductor laser
Video output format (for U.S.A. and Canada)................NTSC
Video output format (for Europe and Australia).... PAL/NTSC
[ Video section ]
input level / impedance
VIDEO input (VIDEO 1 / VIDEO 2)
Composite ................................................ 1 Vp-p / 75 Ω
Output level / impedance
VIDEO output (MONITOR OUT / VIDEO 1)
Composite ................................................. 1 Vp-p /75 Ω
S-video output (MONITOR OUT)
Y-signal ..................................................... 1 Vp-p /75 Ω
C-signal
NTSC ............................................ 0.286 Vp-p /75 Ω
PAL  (for Europe and Australia) ...0.300 Vp-p /75 Ω
Component video output (MONITOR OUT)
(for U.S.A. and Canada)
Y-signal ..................................................... 1 Vp-p /75 Ω
C
B / CR-signal .......................................... 0.7 Vp-p /75 Ω
RGB output (SCART) (for Europe) .............. 0.7 Vp-p /75 Ω
Speaker system
[ KSW-6300 ]
(Front/Center)
Enclosure .......................Bass-Refrex (Magnetically shielded)
Speaker configuration ....................... 50 mm (2”), cone type
Impedance ........................................................................... 8Ω
Power Handling Capacity (DVR-6300) ............................ 60 W
Dimensions ................................................. W: 80 mm (3-1/8”)
H: 160 mm (6-5/16”)
D: 98 mm (3-7/8”)
Weight (net) ......................................... 0.5 kg (1.1 lb)(1 piece)
(Surround)
Enclosure ..............................................................Bass-Refrex
Speaker configuration ....................... 50 mm (2”), cone type
Impedance ........................................................................... 8Ω
Power Handling Capacity (DVR-6300) ............................ 60 W
Dimensions ................................................. W: 80 mm (3-1/8”)
H: 160 mm (6-5/16”)
D: 98 mm (3-7/8”)
Weight (net) ........................................ 0.4 kg (0.9 lb) (1 piece)
 (Subwoofer)
Enclosure ....................................................... Bass-reflex type
Speaker configuration
Woofer ................................... 160 mm (6-1/2”), cone type
Impedance ........................................................................... 4Ω
Power Handling Capacity (DVR-6300) .......................... 100 W
Dimensions .......................................... W: 140 mm (5-1/2”)
H: 350 mm (13-3/4”)
D:325 mm (12-13/16”)
Weight (net) ........................................................ 4.0 kg (8.8 lb)
[ General ]
Power consumption .......................................................... 70 W
Dimensions .......................................... W: 360 mm (14-3/16”)
H: 74 mm (2-15/16”)
D: 375 mm (14-13/16”)
Weight (net) ....................................................... 4.4 kg (9.7 lb)
*5476/43-48/EN04.7.27, 2:06 PM 46
 
						

							47
DVR-6300 (EN/K,P,E,X)
Knowledge
Speaker system (continued)
[ KSW-7300 ]
(Front)
Enclosure .......................Bass-Refrex (Magnetically shielded)
Speaker configuration ................. 50 mm (2”), cone type ✕ 2
Impedance ........................................................................... 8Ω
Power Handling Capacity (DVR-6300) ............................ 60 W
Dimensions ............................................... W: 124 mm (4-7/8”)
H: maximum 337 mm (13-1/4”)
D: 150 mm (5-7/8”)
Weight (net) ...... 1.4 kg (3.1 lb)(1 piece, including the stand)
(Center)
Enclosure .......................Bass-Refrex (Magnetically shielded)
Speaker configuration ................. 50 mm (2”), cone type ✕ 2
Impedance ........................................................................... 8Ω
Power Handling Capacity (DVR-6300) ............................ 60 W
Dimensions ............................................... W: 210 mm (8-1/4”)
H: 80 mm (3-1/8”)
D: 98 mm (3-7/8”)
Weight (net) ........................................................ 0.8 kg (1.8 lb)
(Surround)
Enclosure ..............................................................Bass-Refrex
Speaker configuration ....................... 50 mm (2”), cone type
Impedance ........................................................................... 8Ω
Power Handling Capacity (DVR-6300) ............................ 60 W
Dimensions ................................................. W: 80 mm (3-1/8”)
H: 160 mm (6-5/16”)
D: 98 mm (3-7/8”)
Weight (net) ........................................ 0.4 kg (0.9 lb) (1 piece)
 (Subwoofer)
Enclosure ....................................................... Bass-reflex type
Speaker configuration
Woofer ................................... 160 mm (6-1/2”), cone type
Impedance ........................................................................... 4Ω
Power Handling Capacity (DVR-6300) .......................... 100 W
Dimensions ........................................... W: 140 mm (5-1/2”)
H: 350 mm (13-3/4”)
D:325 mm (12-13/16”)
Weight (net) ....................................................... 4.0 kg (8.8 lb)
Specifications
*5476/43-48/EN04.7.27, 2:06 PM 47
 
						

							For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model Serial Number
*5476/43-48/EN04.7.27, 2:06 PM 48