Kenwood Dvt 6100 Instruction Manual

							31
DVR-605/DVR-6100/DVR-6100K (EN)
Operations
DVD Changing the Camera angleCDVCD Using IntroScan function
Using the on-screen banner display
2Press the Cursor left/right (2/3) keys  until the
ANGLE icon is highlighted.
3Press the ENTER key.
The ANGLE menu appears
4Press the ENTER key repeatedly to select the
angle. 1During playback, press  the ON SCREEN key. Some disc contains multiple angles in particular scene
or sequence. If the disc only has one angle, this feature
won’t work.IntroScan plays the first few seconds of each track on
only one disc similar to the scan feature that’s on many
car radios.
Using the on-screen banner display
2Press the Cursor left/right (2/3) keys  until the
IntroScan  icon is highlighted.
3Press the ENTER key. 1During playback, press  the ON SCREEN key.
÷The first 10 seconds of each track play.
÷After Intro Scan goes through all of the tracks, it
stops.
÷If you want to stop IntroScan while it’s in progress,
just press ENTER key on the remote (the current
track starts playing in its entirety).
Using the On-screen banner display
÷The menu is switched off when no operation is
performed for about 5 seconds.Note Note
P.B.C. on mode of VCD, the IntroScan function may
not work.
ENTERENTER
ENTERENTER
(When the On-screen display has gone out, press the ON
SCREEN key, select Intro Scan, and press the ENTER
key.)
MAIN UNITREMOTEMAIN UNITREMOTE
ON SCREEN
MAIN UNITREMOTE
MAIN UNITREMOTE
ON SCREEN
MAIN UNITREMOTE
MAIN UNITREMOTE
ENTER
MAIN UNITREMOTE
ON SCREENON SCREEN
ENTER
ENTER
ENTERENTER
ENTER
*5262/28-34/EN5/21/02, 1:45 PM 31
 
						

							32
DVR-605/DVR-6100/DVR-6100K (EN)
Operations
DVDCDVCD Using Bookmarks
Create the bookmark Recalling a bookmarked scene
Clearing a bookmark
2Press the Cursor left/right (2/3) keys  until the
BOOKMARK icon is highlighted.
3Press the ENTER key.
The bookmark menu appears
4 Move cursor to the MARK row, and press ENTER
when you reach the point you want to mark. 1During playback, press  the ON SCREEN key.
4 Move the cursor to the GO TO row and select the
bookmark scene you want to activate.
The bookmark appears
The bookmark feature lets you mark a point on the disc that you can go to quickly. You can store up to 9 bookmarks.
5Press the ENTER key to active the bookmark.
÷ The bookmark is cleared each time the disc changes or
when the power is turned off.
Notes
Notes
÷ If all 9 bookmarks are in use, you can still mark new
scenes, but the previous bookmarks will be erased.
÷ Depending on the disc, the Bookmark function may not
work
÷ P.B.C. on mode of VCD, the Bookmark function may not
work.
2Press the Cursor left/right (2/3) keys  until the
BOOKMARK icon is highlighted.
3Press the ENTER key. 1During playback, press  the ON SCREEN key.
÷Press the ON SCREEN key  to switch the menu off.
Using the On-screen banner display
Return to the previ-
ous banner display
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
MARK rowGO TO row
MAIN UNITREMOTE
ON SCREENON SCREEN
MAIN UNITREMOTE
MAIN UNITREMOTE
MAIN UNITREMOTE
ON SCREENMAIN UNITREMOTE
MAIN UNITREMOTE
MAIN UNITREMOTE
ON SCREEN
MAIN UNITREMOTE
MAIN UNITREMOTE
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
÷You can also make a bookmark by pressing a numeric
key (1~9) when the cursor is in the MARK row.
÷Press the ON SCREEN key to switch the menu off.÷You can also go to a bookmark by pressing a numeric
key (1~9)when the cursor is in the GO TO row .
*5262/28-34/EN5/21/02, 1:46 PM 32
 
						

							33
DVR-605/DVR-6100/DVR-6100K (EN)
Operations
DVDCDVCD Repeat playDVDCDVCD A-B Repeat play
Desired titles or discs can be played back repeatedly.
÷Repeat Disc – Repeat the disc that is playing.
÷Repeat Title – Repeat the title that is playing.
÷Repeat Chapter – Repeat the chapter that is playing.
÷Repeat Track – Repeat the track that is playing.The A-B repeat function lets you mark a segment to
repeat between the beginning “A” and the end “B” of
the segment you want to replay.
During playback, press REPEAT on
the remote.
The Repeat display appears
Each press switches the REPEAT
mode.
1Repeat  Disc
2Repeat Title
3Repeat Chapter
4Repeat Off
1Repeat Disc
2Repeat Track
3Repeat Off
DisplayThe Repeat A- display appears
1 Press the A-B key on the remote
when you want to choose a scene
(sound) as the beginning point.
2 Press the A-B key again to choose a
scene (sound) as the end point.
Lit
Lit The Repeat A-B display appearsDisplay
Display
At the time of DVD playback
At the time of CD/VCD playback
Lit
÷To cancel repeat playback, press the REPEAT key
and select Repeat off.
÷The menu is switched off when no operation is
performed for about 5 seconds.÷To cancel A-B Repeat playback, press the A-B key
and select Repeat off.
÷The menu is switched off when no operation is
performed for about 5 seconds.
Using the On-screen banner display
Note Note
P.B.C. on mode of VCD, the Repeat play function may
not work.
Note Note
P.B.C. on mode of VCD, the A-B Repeat play  function
may not work.
+REPEAT
+REPEAT
–
A-B
–
A-B
*5262/28-34/EN5/21/02, 1:46 PM 33
 
						

							34
DVR-605/DVR-6100/DVR-6100K (EN)
Operations
CDVCD Random play
The  tracks of disc are played in random order.
During playback or stop mode, press
RANDOM key on the remote.
Each time you press RANDOM key on
the remote, random play would be on
and off.
1“Random Play”
2“Standard Play”
The Random Play display appearsDisplayLit
÷The menu is switched off when no operation is
performed for about 5 seconds.
The Standard Play display appears when
random is off.
Using the On-screen banner display
Notes
Notes
÷When playing a DVD, the Random function may not
work.
÷P.B.C. on mode of VCD, the Random play  function
may not work.
INPUT MODE
RANDOM
÷When the RANDOM key is pressed during playback, the
tracks of the disc being played will be selected in random order
for playback.
÷After all tracks of a disc have been played in random order,
playback will stop. (Random mode will be cancelled.)
*5262/28-34/EN5/21/02, 1:46 PM 34
 
						

							35
DVR-605/DVR-6100/DVR-6100K (EN)
Operations
DVDCDVCD Program play
Program Edit
1During stop mode, press the PGM key
on the remote.
2Select a specific title/chapter or
track by pressing Cursor up/
down (5/∞) keys or numeric
keys (0-9).
3Press the ENTER key.Program edit display appears.
(An example of DVD program edit menu)
4Select Add icon on the screen to
register selected value onto
Playlist, then press the ENTER key. You can listen to the desired tracks or chapters of the current disc in any desired order.
5You can select maximum 32 val-
ues by repeating step 2 
- 4.
6Press the PLAY key to start play-
back.
2: Selected icon
: An icon which can be selected
: An icon which presently can not be selected
÷When you don’t add values onto “Playlist” and
return to play mode, select Done icon and press
ENTER key on the remote.
÷While a disc is playing, press PGM key on the remote
to start Program play
÷To return to standard play, press the PGM key again.
÷MP3 discs can not be programmed with this pro-
gram mode. (MP3 program play t)
Add / Insert icon --- Add / Insert value to “Playlist”
Delete icon --- Delete value from “Playlist”
Play icon --- Play program play
Done icon --- Return to stop or resume mode
Registering and playing the program
Insert the disc to be used in programming in the tray, close it and press the PLAY key so that the player reads the
disc information by playing disc until display “READING” disappears. (If the tray is opened after this, the above
procedure should be repeated so that the player reads disc information again.)
PROGRAM EDIT
2All
Add
DeleteC T
Play
Done Title
(12) (2)Chapter
Playlist
PROGRAM EDIT
2All
Add
DeleteC T
Play
Done Title
(12) (2)Chapter
Playlist
2All
Note Note
+100
PGM
ENTER
ENTER
ENTERENTER
*5262/35-45/EN5/18/02, 9:12 PM 35
 
						

							36
DVR-605/DVR-6100/DVR-6100K (EN)
Operations
Program play
Insert chapter or track
During stop mode, press the PGM key on the remote
1Select a specific title/chapter or
track  to insert by pressing
Cursor up/down (5/∞) keys or
numeric keys (0-9).
(An example of DVD program edit menu)
2 Move the cursor with the Cursor
right (‰) key to the "Playlist" and
select the column to be added with
the Cursor up/down (5/∞) keys.
(The color of the column where the
Cursor is located will change.)
3 Move the cursor with the Cursor
left (2) key to the Insert icon and
press the ENTER key.
The new chapter or track will be in-
serted before (above) the selected
column.
Delete Program
During stop mode, press the PGM key on the remote
Selected value deletes 1Use the Cursor up/down (5/∞)  keys
to select the column to be deleted
from the "Playlist". (The color of the
column where the Cursor is located
will change.)
2Press the Cursor left (2) key, use the
Cursor up/down keys to move the
Cursor to the Delete icon, and press
the ENTER key. Or press the clear
key.
P.B.C. on mode of VCD, the Program play
function may not work.
Release Program play
In following case, Program play would be released.
1. When you open and close tray.
2. When you turn power off and on.
Note Note
PROGRAM EDIT
All
InsertC T
Play
Done Title
(12) (2)Chapter
Playlist
2All
312
18
1 All
35Delete
2
ENTER
ENTER
ENTERENTER
ENTER
ENTERENTER
PROGRAM EDIT
All
AddC T
Play
Done Title
(12) (2)Chapter
Playlist
2All
312
18
1 All
35Delete
2
PROGRAM EDIT
All
InsertC T
Play
Done Title
(12) (2)Chapter
Playlist
2All
312
18
1 All
35
2All
Delete
2
*5262/35-45/EN5/18/02, 9:12 PM 36
 
						

							37
DVR-605/DVR-6100/DVR-6100K (EN)
Operations
Menu playback
VCDHierarchical structure of VCD menus
First level (menu)
When an item is selected on the menu screen during playback of a P.B.C.-compatible VCD, another menu with more
details items may be displayed. When a number of menus are connected in multiple layers in this way, it is said that
the menus have a hierarchical structure. In this structure, the desired scene can be reached by repeating item
selections on the menu screens.
Example for a hierarchical structure
Second level (submenu)
Third level (scenes)
Advancing
When an item is selected on the menu screen with the 3  key
or the numeric keys, advance is made to the next lower
menu level. When the advance destination is the “scene” to
be played, the contents will be played.
÷When several menus (scenes) can be selected in each level, screen
switching is possible with the keys ¢ (NEXT) and 4 (PREV.).
Returning
Each time the RETURN key is pressed, return is made to the
next higher menu.
Soft jacket indication
÷Depending on the software, the jacket indication may differ from the above.
¢
4
3
Examples of operation keys and indications used during VCD playback
KENWOOD operation keyRETURN
ENTER or SELECT
ENTER
¢ 4
*5262/35-45/EN5/18/02, 9:12 PM 37
 
						

							38
DVR-605/DVR-6100/DVR-6100K (EN)
Operations
÷For the track numbers, refer to the disc jacket or other
material.
÷P.B.C. off mode : Without using menu playback function.
VCDPlayback without using the menu playback function (In case of
a P.B.C.-compatible VCD) (To P.B.C. On or Off)
To return to menu playback
Press the TOP MENU key again. Press the TOP MENU key on the remote control unit.
Lit Goes off
P.B.C. on mode P.B.C. off mode
Menu playback
TOP MENU/P.B.C.
÷The VCD returns to the previous scene.
To return to the previous screen
Press RETURN on the remote control unit.
RETURN
*5262/35-45/EN5/18/02, 9:12 PM 38
 
						

							39
DVR-605/DVR-6100/DVR-6100K (EN)
Operations
DVDCDVCDEnjoying karaoke singing (DVR-6100K only)
1Load a disc and Connect a microphone.
2Start playback.
Preparation
÷Adjust volume level of the microphone.
MIC LEVEL
÷When the 6 key is pressed while a tray is open, the tray
closes automatically, and then playback begins.1. Karaoke mode operation is possible only when a micro-
phone is connected.
2. When this unit is connected with an amplifier or re-
ceiver with only the digital connection, the microphone
audio cannot be output. Use the AUDIO OUTPUT
jacks to output the microphone audio from this unit.
3. Karaoke operation is not available for DTS and MP3
format disc.  In case of DTS CD, you may hear a loud
noise.
Notes
Notes
VCDSelecting the Audio channel
During VCD playback, press AUDIO key on the
remote. You can choose to play back only the right or the left channel of audio recorded on the disc, or you can select stereo
playback.  This function is used for purposes such as selecting the vocal track on a Karaoke disc.Each press switches the mode.
1Stereo
2Left
3Right
÷When playing a Karaoke DVD, please refer to the instructions
included with the disc.
DVDCDVCDControlling the key of the music (KEY CONTROL)
This feature allows to transpose the key of the music according to the key of the singer’s voice.
1During playback, press the Key Control keys, the
OSD appear on the TV display.
2Press the Cursor up/down (5/∞) keys or Key
Control keys to adjust the KEY level.
Press within 5 seconds after
pressing the SHIFT key.
Press within 5 seconds after
pressing the SHIFT key.
or
Downward UpwardKARAOKE mode iconKEY CONTROL icon
÷Press the next key within 5 seconds of pressing the SHIFT
key.
÷KEY CONTROL can be varied from -3 to +3.
÷Press the Cursor left or right (2/3) key while the OSD is
displayed to select another icon.
÷To turn off the OSD, press the ON SCREEN key.
÷To exit from the KARAOKE mode, select the KARAOKE mode
ion while the OSD is displayed and press the ENTER key.
1Open the tray.
2Place a disc.
0OPEN/CLOSE
PLAY/PAUSE
6LEVEL
AUDIO
SHIFT
SW
ENTER
SW
SHIFT
*5262/35-45/EN5/18/02, 9:13 PM 39
 
						

							40
DVR-605/DVR-6100/DVR-6100K (EN)
Operations
DVDCDVCDAdjust the ECHO level
1During playback, press the ECHO keys, the OSD
appear on the TV display.
2Press the Cursor up/down (5/∞) keys or ECHO
keys to adjust the ECHO level.
Press within 5 seconds after
pressing the SHIFT key.
or
Press within 5 seconds after
pressing the SHIFT key.
To decrease
the ECHO
levelTo increase
the ECHO
level
An echo effect can be applied to the microphone
voice to make karaoke singing sound better.
KARAOKE mode iconEcho icon
÷Press the next key within 5 seconds of pressing the SHIFT
key.
÷The echo effect can be varied from 0 to 9.
÷Press the Cursor left or right (2/3) key while the OSD is
displayed to select another icon.
÷To turn off the OSD, press the ON SCREEN key.
÷To exit from the KARAOKE mode, select the KARAOKE mode
ion while the OSD is displayed and press the ENTER key.
Note Note
KARAOKE mode iconHIT MASTER icon
1During playback, press the ECHO keys, the OSD
appear on the TV display.
2Press the cursor left/right (2/3) keys to select HIT
MASTER.
DVDCDVCDHIT MASTER  function
The sound level of the vocal part of the disc is suppressed, so that it can be used in the same way as a KARAOKE disc.
÷Press the Cursor left or right (2/3) key while the OSD is
displayed to select another icon.
÷To turn off the OSD, press the ON SCREEN key.
÷To exit from the KARAOKE mode, select the KARAOKE mode
icon while the OSD is displayed and press the ENTER key.
Depending on the disc, the suppression amount may
be smaller. Each press switches the mode.
1HIT MASTER ON
2HIT MASTER OFF
Note Note
CENTERFRONT
ECHO–+
ENTER
CENTERFRONT
ECHO–+
ENTER
Enjoying karaoke singing (DVR-6100K only)
3Press the ENTER key to switch HIT MASTER on/
off.
This operation displays the KARAOKE display.
ENTERENTER
SHIFT
SHIFT
Press within 5 seconds after
pressing the SHIFT key.
CENTERFRONT
ECHO–+SHIFT
*5262/35-45/EN5/18/02, 9:13 PM 40