Kenwood Cv301 Manual

11
C-V351/C-V301 (EN)
Setup of the Graphical Remote Control (GRC) unit (For C-V351)
Controls and indicators(Optional with the C-V301)
Approximate operating range
Remote sensorInfrared remote control
GRC or RC
Infrared ray system1. The supplied batteries are intended for use in operation check.
Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than
before, replace all four batteries with new ones.
3. Malfunction may occur if direct...

12
C-V351/C-V301 (EN)
3
1
2
ON/STANDBY
MUTE
VOLUMEENTER
Model  Typ
e  Setup
Model 6Model 5Model 4
Model 3Model 2Model 1
Model  Typ
e  Setup
Model 6Model 5Model 4
Model 3Model 2Model 1
1
3
2
4
Set Up
ENTER
Reset
ENTERENTER
ENTER
Setup of the Graphical Remote Control (GRC) unit
Setting up the GRC according to your AV CONTROL CENTER (Model Type Setup)
Perform the following procedure after inserting batteries for
the first time and every time after changing them.
PreparationÖPress the            (ON/STANDBY)...

13
C-V351/C-V301 (EN)
Set UpSet UpSet Up
C D
Sing
leDual
L D
System Control
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
Tape1
Setting up the GRC according to the option components (Set Up)
The following procedures prepare the GRC for operating the
components connected through system control cords. Make
sure that these components are connected through system
control cords.7
ÖIf you proceed to the following ÒSet UpÓ operations immediately after steps 1 to 4 of ÒModel Type
Setup (GRC...

14
C-V351/C-V301 (EN)
Set UpSet Up
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
Set Up MD Set Up DVD
ÖSelect ÒSystem ControlÓ or ÒIRÓ ac-
cording to the connected MD recorder
type. 1Select the ÓSet UpÒ icon.
2Press the ÓENTERÒ key to enter the
selection.
3Select the ÓMDÒ icon.
4Press the ÓENTERÒ key to enter the
selection.
5Select the ÓSystem ControlÒ icon.
6Press the ÓENTERÒ key to enter the
selection.
7Select the ÓMain MenuÒ icon.
8Press the ÓENTERÒ key to enter the
selection.1Select the ÓSet UpÒ icon....

15
C-V351/C-V301 (EN)
1
2
VCR1
123
456
789
0
Set
000
Set Up
ENTER
ENTER
ENTER
Set
431
Setting up the GRC according to other components (Set Up)
The GRC can also be used to remote control other compo-
nents which are not connected through system control
cords. To control another component, it is required to regis-
ter the setup code corresponding to it beforehand.p
Registering setup codes for VCR 1
Find the setup code of the component to be registered by referring to the Setup code chart in this manual....

16
C-V351/C-V301 (EN)
Sound
STEREO
PRO LOGIC
3 STEREO
SourceDirect
Main Menu 1
C D
Tuner
Tape1 / MD
6ch  Input
LD / DVD
VCR
AUX
1 1
3
3
Main Menu 2
Display
Tape2 Monitor
Sleep
ENTER
ENTERENTER
ENTER
ENTER
ENTER
ENTER
Remote control of components from the GRC (For C-V351)
Controlling the AV CONTROL CENTER
The operations required to remote control the AV CONTROL
CENTER includes the INPUT SELECTOR selection, display
mode selection, stereo selection and so on.
The following procedures show how to remote...

17
C-V351/C-V301 (EN)
ENTER
ENTER
C D
CD
ENTER
ENTER
Tuner
ENTER
ENTER
ENTER
Tuner
ENTER
Tuner
Memory /
10key PadAutoBand
RDS
01ch100.00fm   MHzP.Call
Remote control of components from the GRC
Controlling the components connected through system control cords
When a CD player, cassette deck and/or LD player are
connected with the AV CONTROL CENTER through system
control cords, their system control operations are possible
from the GRC.
PreparationsÖSystem control connection7ÖModel Type Setup@ÖSetup of...

18
C-V351/C-V301 (EN)
ENTER
ENTER
ENTER
pTape B
CCRS O.T.E.
ENTER
Tape1 / MD
TapeB
ENTER
ENTER
LD
ENTER
ENTER
Remote control of components from the GRC
Main operation menu
Operating the cassette deck
1 Select the ÓTape 1Ò input.
2 Display the cassette deck opera-
tion menu.
3Select the icon to be operated.
4Enter the selection
(by pressing the ÓENTERÒ
key).
Operating the LD player
1 Select the ÓLDÒ input.
2 Display the LD player operation
menu.
3Select the icon to be oper-
ated.
4Enter the selection
(by...

19
C-V351/C-V301 (EN)
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
Remote control of components from the GRC
Main operation menu
Operating the MD recorder
1 Select the ÓMDÒ input.
2Display the MD operation menu.
3Select the icon to be operated.
4Enter the selection
(by pressing the ÓENTERÒ
key).ÖAny of the keys which can control the MD recorder can be selected.
Operating the DVD player
1 Select the ÓDVDÒ input.
2 Display the DVD operation menu.
3Select the icon to be operated.
4Enter the selection
(by...

20
C-V351/C-V301 (EN)
Remote control with the ÒRCÓ unit (For C-V301)
Names and functions of the keys
The ÒRCÓ remote control unit provided with the AV CONTROL CENTER can also control KENWOOD cassette decks, CD player
and LD player connected to the AV CONTROL CENTER through system control cords. For details of the controllable functions,
refer to the instruction manuals of these components.
Infrared system
RC-S0506 The RC keys with the same names as the corresponding keys
on the main unit have the same...