Kel-tec SU-16 Instructions Manual

							WARRANTY WARRANTYWARRANTY WARRANTY
WARRANTY
This warranty is granted by Kel-Tec CNC
Industries, Inc. P.O. Box 236009, Cocoa, FL
32923. This lifetime warranty is effective from
the date of purchase and applies to the original
owner of a Kel-Tec SU-16 rifle.
Kel-Tec firearms are warranted to be free from
defects in material and workmanship. Any such
defects of which Kel-Tec receives written notice
by the original owner, will be remedied by Kel-
Tec without charge within a reasonable time
after such notification and delivery of the
product as provided below.
Warranty claims (in writing) and the gun
concerned should be delivered (transportation
charges pre-paid) to:
Kel-Tec CNC, Inc
Service Department
1475 Cox Road
Cocoa, FL 32926.
No return authorization number is required. In
addition, a copy of a bill of sale in the owner’s
name, or a copy of ATF Form 4473, indicating
date of purchase must be included.
In order to expedite service, warranty claims
should state the model and serial number of the
gun concerned and a description of the difficulty
experienced. It is recommended that shipments
be insured by the owner, since Kel-Tec will
accept no responsibility for loss or damage in
transit.Transportation and insurance charges for return
to owner will be paid by Kel-Tec if the claim is
covered by the warranty.
Under no circumstances shall Kel-Tec be
responsible for incidental or consequential
damages with respect to economic loss or
injury or property damage, whether as a result
of breach of express or implied warranty,
negligence or otherwise. Some states do not
allow the exclusion or limitation or incidental or
consequential damages, so the above limitation
or exclusion may not apply to you.
Kel-Tec will not be responsible for defects
resulting from careless handling, unauthorized
adjustments or modifications, defective or
improper ammunition, corrosion, neglect,
abuse, ordinary wear and tear, or unreasonable
use. 
						

							100-BARREL
102-BARREL NUT
104-BARREL EXTENSION
108-BARREL RETAINER
110-BOLT
112-EXTRACTOR
114-EXTRACTOR AXIS
116-EJECTOR
118-FIRING PIN
120-BOLT CARRIER
122-OPERATING HANDLE
124-PISTON  ROD
126-CAM PIN
128-RECOIL SPRING CATCH
130-PISTON HEAD
132-RECOIL SPRING TUBE
134-FIRING PIN PIN
136-GAS BLOCK
138-GAS HEAD
140-TRIGGER BLOCK
142-HAMMER
144-SEAR
145-SEAR SPRING PIN
146-SAFETY
148-FOREND AXIS
150-STOCK SPACER-16
154-STOCK SPACER-29
158-ASSEMBLY PIN
159-MAG SNAP PIN
172-FOREND LOCK SPRING
174-RECOIL SPRING
176-MAGAZINE CATCH SPRING
180-SEAR SPRING
182-TRIGGER SPRING
186-STOCK PIN SPRING
188-MAGAZINE SNAP SPRING
190-BOLT STOP SPRING
192-FOREND SPREADER SPRING194-EXTRACTOR SPRING
196-EJECTOR SPRING
198-MAGAZINE SPRING
202-RECEIVER
204-MAG WELL
206-FRONT SIGHT
208-TRIGGER
212-STOCK-RIGHT
214-STOCK-LEFT
216-RECEIVER SPACER
218-FOREND-RIGHT
220-FOREND-LEFT
226-FOREND LOCK
228-BOLT STOP
230-REAR SIGHT
232- REAR SIGHT LOCK
234-MAG CATCH
236-FRONT SIGHT SCREW
240-FRONT SIGHT POST
244-RECOIL PAD
252-MAGAZINE HOUSING
254-MAGAZINE FOLLOWER
256-MAGAZINE PLATE
258-MAGAZINE BOTTOM
268-SAFETY/OPERATION MANUAL
274-EJECTOR PIN
276-RECEIVER SCREW
278-RECEIVER WASHER
280-TRIGGER AXIS
282-HAMMER AXIS
284-BARREL EXTENSION PIN
286-FOREND PIN
288-F.E. LOCK RETAINING RING
290-MAG SNAP E-RING
292-GAS HEAD PIN
294-O’RING
296-PISTON PIN
298-SEAR PINSU-16 RIFLE PARTS LIST