Kamesan KS 6001_operating Manual
Have a look at the manual Kamesan KS 6001_operating Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 7 Kamesan manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 KS-6001 Technical notes and specifications, etc. Inputs Input level (4 channels)MIC– 70 to –30 dBs (balanced inputs) LINE–20 to +4 dBm (balanced inputs) Input impedanceMIX1.2 kΩ LINE600 Ω Headroom> 30 dB (pre -fader) Phantom poweringeither 48 V (maximum current of 8 mA) or A - B 12 V (maximum current of 40 mA) High - pass filter–12 dB /octave, sweepable cutoff between 20 Hz and 200 Hz Outputs Output level–20 dBs (from a 7- pin Cannon connector, electrically balanced, low - impedance output Maximum output+8 dBs (into 600Ω) Performance Figures measured when connected to KS -342. Frequency response 50 Hz to 15 kHz, < ±1.0 dB Signal -to - noise ratioMIC at –70>55 dB (30 kHz LPF/ RMS) LINE at +4>68 dB (30 kHz LPF/ RMS) Total harmonic distor- tionLINE < 0.5% (50 Hz thru 15kHz, nominal level) MONI < 0.5% (50 Hz thru 15kHz, nominal level)
12 KS-6001 Electrical characteristics Figures measured when connected to KS -342 External power supplyBetween +10 V and +16 V DC (maximum power 0.2A) Supplied through 7- pin Cannon connector or through dedicated DC input Typical power consump- tion 105 mA Battery life (KS -342 and KS - 6001 used together)> 2 h (manganese cells) > 3 h (alkaline cells) > 6 h (NP-1 pack) Battery life ((KS - KS - 6001 used as standalone)> 2 h (manganese cells) > 3 h (alkaline cells) > 6 h (NP-1 pack) Physical specifications Dimensions (w x d x h)215 x 170 x 40 (mm) 8.5 x 6.7 x 1.6 (in) Weight1.1 kg (2.4 lb) Connector pinout The XLR -7-11C connector used to provide power and to carr y out the master bus signals is wired as follows: 1FG5R - ch — 2L- ch +6DC IN + 3L- ch —7DC 0V 4R - ch +
13 KS-6001 Block diagram to SS342 OUTPUT SELEC T EXT I/O T ALLY (HA) Power Regulator EXT .DC IN JACK DC-DC Converter DC-DC ConverterP-48V (option) MIC -70~-30 MIC -70~-30 MIC -70~-30 MIC -70~-30 ( 20~200Hz ) ( 20~200Hz ) ( 20~200Hz ) ( 20~200Hz ) LINE -20~+4 LINE -20~+4 LINE -20~+4 LINE -20~+4 EXT .DC IN INPUT SEL. OUTPUT SEL INPUT SEL. OUTPUT SEL INPUT SEL. OUTPUT SEL INPUT SEL. OUTPUT SEL (to SS342) L-SUB MIX R-SUB MIX L-MIX BUS R-MIX BUS PFL TAL LY PFL TALL Y (XLR7-32) L M IX BUS R MIX BUS POWER/OUT INPUT INPUT INPUT INPUT EXT. I /O A-B12V MONI OUT L AUX IN R A UX IN (+9~16V) (+9~16V) (-20dBs) (XLR-3) (XLR-3) (XLR-3) (XLR-3) EXT . I /O INS I/O MIX OUT EXT I/OMIX OUT H.P.F. H.P.F. H.P.F. H.P.F. MIX IN AUX IN PFL IN L MAS POWER POWER A-B 12A-B 12A-B 12A-B 12 P-48V AUX L AUX R R MAS GAIN LINE GAIN GAIN GAIN Dy-MP-48 LINE Dy-MP-48 LINE Dy-MP-48LINE Dy-MP-48 LINK LINK LINK LINK Peak Peak Peak Peak CH1 CH2 CH4 CH3 PFL PFL PFL PFL PFL BAL BAL PFL MIX MIX PFL OFF OFF FD B A HA FDB A HA +B FD B A HA FD B A HA B AB A B A PPP LCR P LRCLRCLRC
14 KS-6001 About Kamesan Sigma Systems Engineering was started in 1972 to develop and design professional mixers for studio and remote broadcast applications. Today, following the “slow and steady” principle of the tortoise, we have built up our sales and our reputation to the extent that we now enjoy 95% of the Japanese portable mixer market. We have concentrated on two or three main areas in our design philos- ophy: compactness, in an industr y which was traditionally dominated by large, heavy equipment; ease of use, since time is always of the es- sence in the environments where our products are used; and quality, to match the needs that today’s broadcasters require. Our head office is in Shinjuku, Tokyo, and as a small company, we are happy to listen to the ideas for product improvement suggested by you, the customers and users of our equipment. Making steady progress (like a tortoise, but maybe a little faster!), we hope to meet your requirements, now and in the future. Visit both of our Web sites at http://www.kamesan.co.jp and http://www.kamesan.info in order to find out more about what we’re doing, and to let us know what you are doing with Kamesan prod- ucts.
Sigma Systems Engineering Co. Ltd. 3 - 5 -2 Okubo Shinjuku - ku Tokyo 169 - 0072 JAPAN Tel: +81 3 3204 2611 Fax: +81 3 3204 2250 e - mail: sales @kamesan.co.jp