Home > Kamesan > Music System > Kamesan KS 1017_operating Manual

Kamesan KS 1017_operating Manual

Here you can view all the pages of manual Kamesan KS 1017_operating Manual. The Kamesan manuals for Music System are available online for free. You can easily download all the documents as PDF.

Page 11

10
Kachinko System
11
Kachinko System
4. As the signals are received, they light in the 1st, 2nd and 3rd 
columns.  There  will  only  be  one  indicator  at  most  in  a  col-
umn,  and  the  columns  fill  up  from  the  left.  The  illustrations 
here show different possible results: in 1, the video signal is 
received  first,  followed  by  A2,  which  is  then  followed  by  A1. 
In 2,  A2  and  A1  arrive  (in  that  order)  followed  by  the  video 
signal. In 3, A1 arrives first, followed by the...

Page 12

12
Kachinko System
13
Kachinko System
Interpreting the results
1. To read the figures, press the DATA SEL. key to cycle through 
the  three  different  readings  (between 1st  and 2nd,  and 2nd 
and 3rd on the top row of the three selection indicators, and 
between 1st and 3rd on the bottom).
2. The gap between the signals is shown in either milliseconds 
or in frames, depending on the setting made with the 
mS/FRAME switch.
If an interval is too long to be displayed (over 6 seconds), 
the T.OVER...

Page 13

12
Kachinko System
13
Kachinko System
Specifications
Inputs (AUDIO 1, AUDIO 2)
Input levels
MIC– 60 dBs (balanced inputs)
LINE–10 dBm (balanced inputs)
Input impedance
MIC30 kΩ (dynamic microphone)
LINE600 Ω
Frequency response400 Hz (–12 dB) to 6 kHz (– 6 dB)
Detectable input levelFrom –∞ to+16 dB (controllable)
Monitoring (internal speaker)Off, AUDIO 1, AUDIO 2
Input (VIDEO)
ConnectionThrough dedicated video probe
SensitivityTo light with 350 nm to 800 nm wavelength; 
peak sensitivity at 560 nm...

Page 14

14
Kachinko System
Pinouts
Joint connector
1 Ground9 A1 in (cold)
2 A1 in (hot)10 ground
3 Ground11 A2 in (cold)
4 A2 in (hot)12 0 V
5 0 V13 DC IN (+9 V to +15 V)
6 DC IN (+9 V to +15 V)14 Output (–30 dBs)
7 NC15 NC
8 NC—
About Kamesan
Sigma Systems Engineering was started in 1972 to develop and design 
professional mixers for studio and remote broadcast applications.
Today,  following  the  “slow  and  steady”  principle  of  the  tortoise,  we 
have  built  up  our  sales  and  our  reputation  to  the...

Page 15

14
Kachinko System 

Page 16

Sigma Systems Engineering Co. Ltd.
3 - 5 -2 Okubo
Shinjuku - ku
Tokyo 169 - 0072
JAPAN
Tel: +81 3 3204 2611
Fax: +81 3 3204 2250
e - mail: sales @kamesan.co.jp 
Start reading Kamesan KS 1017_operating Manual

Related Manuals for Kamesan KS 1017_operating Manual

All Kamesan manuals