JVC Th S1 Instructions

Advanced operations
28
4Press ENTER.
Example:
5Press Cursor Y/5 to change the 
setting.
6Press ENTER.
The current VFP settings appear again.
7Repeat steps 3 to 6 to adjust other 
parameters.
8Press VFP.
NOTE
 Although the setting display disappears in the middle of the 
procedure, the setting at that time will be stored.
7While stopped
1Press PLAY MODE repeatedly until 
program window appears on the TV 
screen.
2Follow the instructions that appears on 
the TV screen to program the desired 
chapters/...

Advanced operations
29
Repeating the current selection
7For DVD VIDEO:
During playback
For VCD/SVCD:
During playback without PBC function
For CD/MP3/JPEG:
During playback or stopped
When using the REPEAT button:
Press REPEAT.
Each time you press REPEAT, the Repeat mode changes.
NOTE
 For DVD VIDEO, REPEAT ALL may not be available depending on 
the disc.
When using the on-screen bar (except for MP3/
JPEG disc):
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2Press Cursor 3/2 to...

Advanced operations
30
When using the on-screen bar:
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2Press Cursor 3/2 to highlight  .
3Press ENTER.
4Press Cursor Y/5 repeatedly to select 
“A-B”.
5Press ENTER at the beginning of the 
part you want to repeat (point A).
6Press ENTER at the end of the part you 
want to repeat (point B).
A-B Repeat Playback starts.
7Press ON SCREEN.
The on-screen bar disappears.
To cancel
Select “OFF” in step 4, then press ENTER.
NOTE
 When playing back...

31
Setting DVD preferences
 You can change the language used in the setup menus. See 
“Menu description”.
Basic operation on the setup menus
IMPORTANT
Before using the remote control for the 
following operation;
1 Set the remote control mode selector to 
AUDIO.
2Press DV D.
7While stopped
1Press SET UP.
2Follow the instructions that appears on 
the TV screen.
: Language menu (LANGUAGE)
7MENU LANGUAGE
Some DVDs have their own menus in multiple languages.
 Select the initial menu language*.
7AUDIO...

Setting DVD preferences
32
: Picture menu (PICTURE)
7MONITOR TYPE
You can select the monitor type to match your TV when you play 
DVDs recorded in the picture’s height/width ratio of 16:9.
 16:9 (Wide television conversion)Select this when the aspect ratio of your TV is 16:9 (wide 
TV).
 4:3 LB (Letter Box conversion)Select this when the aspect ratio of your TV is 4:3 
(conventional TV). While viewing a wide screen picture, the 
black bars appear on the top and the bottom of the screen.
 4:3 PS (Pan...

Setting DVD preferences
33
7Distance menu (DISTANCE)
Example:
In this case, set the distance of each speaker as follows;
 Distance of front speakers:  3.0 m
 Distance of center speaker:  2.7 m
 Distance of surround speakers: 2.4 m
FRONT SPEAKER/CENTER SPEAKER/SURROUND 
SPEAKER
Adjust the distance from the listening position to the speakers.
Within the range from 0.3 m to 9.0 m. (by 0.3 m)
RETURN
Returns to the SPK. SETTING menu.
: Other setting menu (OTHERS)
7RESUME (See page 25.)
You can activate or...

Setting DVD preferences
34
Country/Area codes list for Parental Lock
AD Andorra ER Eritrea
LALao People’s Democratic 
RepublicRW R wa nd a
AE United Arab Emirates ES Spain SA Saudi Arabia
AF Afghanistan ET Ethiopia LB Lebanon SB Solomon Islands
AG Antigua and Barbuda FI Finland LC Saint Lucia SC Seychelles
AI Anguilla FJ Fiji LI Liechtenstein SD Sudan
AL Albania FK Falkland Islands (Malvinas) LK Sri Lanka SE Sweden
AM Armenia
FMMicronesia (Fedelated States 
of)LR Liberia SG Singapore
AN Netherlands...

35
Tuner operations
IMPORTANT
Before using the remote control for the 
following operation; 
1 Set the remote control mode selector to 
AUDIO.
2Press FM/AM.
1Press FM/AM repeatedly to select the 
band.
Example:
When the system is tuned in to 810 kHz.
2Press TUNING9/( repeatedly until 
you find the frequency you want.
When you hold down the button until the system starts 
searching for stations and then release it, the system stops 
searching automatically when a station of sufficient signal 
strength is...

Tuner operations
36
When the stereo FM program currently tuned in is noisy, you can 
change the FM reception mode to improve the reception.
7While listening to an FM station
Press FM MODE.
The FM reception mode appears on the display window.
Each time you press the button, the FM reception mode changes.
 AUTO MUTING:
When a program is broadcast in stereo, you will hear stereo 
sound. (The ST indicator lights on the display window.) When in 
monaural, you will hear monaural sound. This mode is also...

Tuner operations
37
Searching for a program by PTY codes
One of the advantages of the RDS service is that you can locate a 
particular kind of program from the preset channels (see page 35) 
by specifying the PTY codes.
7To search for a program using the PTY codes
NOTE
Before you start operation; The PTY Search is only applicable to preset stations.
 To stop searching any time during the process, press PTY SEARCH 
while searching.
 There is a time limit in doing the following steps. If the setting is...