JVC Th P3 Instructions

28
Advanced operations
6Press ENTER.
The current VFP settings appear again.
7Repeat steps 3 to 6 to adjust other 
parameters.
8Press VFP.
NOTE
 Although the setting display disappears in the middle of the 
procedure, the setting at that time will be stored.
7While stopped
1Press PLAY MODE repeatedly until 
program window appears on the 
TV screen.
2Follow the instructions that 
appear on the TV screen to 
program the desired chapters/
tracks.
 For details on using the number buttons, see “How to 
use...

29
Advanced operations
Repeating the current selection
7For DVD VIDEO/DVD VR: 
During playback
7For VCD/SVCD: During playback 
without PBC function or stopped
7For CD/MP3/WMA/JPEG/ASF/
MPEG-2/MPEG-1/DivX: During 
playback or stopped
When using the REPEAT button:
Press REPEAT with SHIFT pressed.
Each time you press REPEAT, the Repeat mode changes.When using the on-screen bar (except for MP3/WMA/
JPEG/ASF/MPEG-2/MPEG-1/DivX):
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2Press Cursor...

30
Advanced operations
When using the on-screen bar:
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2Press Cursor 3/2 to highlight 
.
3Press ENTER.
4Press Cursor Y/5 repeatedly to 
select “A-B”.
5Press ENTER at the beginning of 
the part you want to repeat (point 
A).
6Press ENTER at the end of the part 
you want to repeat (point B).
A-B Repeat Playback starts.
7Press ON SCREEN.
The on-screen bar disappears.
To cancel
Select “OFF” in step 4, then press ENTER.
NOTE
 When playing back...

31
Setting DVD preferences
 You can change the language used in the setup menus. 
See “Menu description”.
Basic operation on the setup menus
7While stopped
1Press SET UP, with SHIFT pressed.
2Follow the instructions that 
appear on the TV screen.
: Language menu (LANGUAGE)
7MENU LANGUAGE
Some DVDs have their own menus in multiple languages.
 Select the initial menu language*.
7AUDIO LANGUAGE
Some DVDs have multiple audio languages.
 Select the initial audio language*.
7SUBTITLE
Some DVDs have multiple...

32
Setting DVD preferences
7PICTURE SOURCE
You can obtain optimal picture quality by selecting whether 
the content on the disc/file is processed by field (video 
source) or by frame (film source).
Normally set to “AUTO”.
AUTO
Used to play a disc/file containing both video and film 
source materials.
This system recognizes the source type (video or film) of 
the current disc/file according to the disc/file 
information.
– If the playback picture is unclear or noisy, or the oblique 
lines of the picture...

33
Setting DVD preferences
7Subwoofer menu (SUBWOOFER)
LEVEL
You can set the output level of the subwoofer in the -6 dB to 
+6 dB range.
CROSS OVER
The signals below the preset frequency level will be sent to 
and be reproduced by the subwoofer.
Select one of the crossover frequency levels according to the 
size of the small speaker connected.
120Hz: Select when the cone speaker unit built in the 
speaker is about 8 cm.
150Hz: Select when the cone speaker unit built in the 
speaker is about 6 cm....

34
Tuner operations
1
Press FM/AM repeatedly to select 
the band.
Example: When the system is tuned in to 810 kHz.
2Press TUNING9/( repeatedly 
until you find the frequency you 
want.
When you hold down the button until the system starts 
searching for stations and then release it, the system 
stops searching automatically when a station of 
sufficient signal strength is tuned in to.
NOTE
 When an FM stereo program is received, the ST indicator 
lights on the display window.
Once a station is assigned...

35
Tuner operations
When the stereo FM program currently tuned in is noisy, 
you can change the FM reception mode to improve the 
reception.
7While listening to an FM station
Press FM MODE.
The FM reception mode appears on the display window.
Each time you press the button, the FM reception mode 
changes.
AUTO:
When a program is broadcast in stereo, you will hear 
stereo sound. (The ST indicator lights on the display 
window.) When in monaural, you will hear monaural 
sound. This mode is also useful to...

36
Tuner operations
1Press PTY SEARCH with SHIFT 
pressed, while listening to an FM 
station.
“PTY” and “SELECT” flash alternately on the display 
window.
While “PTY” and “SELECT” is flashing alternately:
2Press PTY9 or PTY( repeatedly 
with SHIFT pressed, until the PTY 
code you want appears on the 
display window.
 For details, see “Description of the PTY codes”.While the PTY code selected in step 2 is still on the display 
window:
3Press PTY SEARCH again.
While searching, “SEARCH” and the selected...

37
Tuner operations
Switching to broadcast program of your 
choice temporarily
Another convenient Radio Data System service is called 
“Enhanced Other Network”.
This allows the system to switch temporarily to a broadcast 
program of your choice (TA, News, and/or Info) from a 
different station except in the following cases:
 When you are listening to non-Radio Data System 
stations (all AM – MW stations, some FM stations and 
other sources).
 When the system is in standby mode.
NOTE
 Before you start...