JVC Th M45 Instructions

Tuner operations
28
2Press MEMORY.
The channel number position starts flashing on the display 
window for about 5 seconds.
While the channel number position is flashing:
3Press number button(s) (1-10, +10) to 
select a channel number.
The channel number and the CH indicator start flashing.
Examples:
For channel number 3: Press 3
.
For channel number 14: Press +10
, then 4
.
(For FM stations only)
For channel number 24: Press +10
 twice, then 4
.
For channel number 30: Press +10
 twice, then 10
.
While...

29
Creating realistic sound fields
You can use the following surround modes to reproduce a realistic 
sound field.
• Dolby Surround
•Dolby Pro Logic II
Dolby Digital
 DTS Digital Surround
DSP modes
DAP modes
All Channel Stereo

Dolby Surround
Dolby Pro Logic II*
Dolby Pro Logic II has a newly developed multichannel playback 
format to decode all 2 channel sources — stereo source and Dolby 
Surround encoded source — into a 5.1 channel.
The matrix-based encoding/decoding method used by Dolby Pro...

Creating realistic sound fields
30
Creating sound field
All Channel Stereo
All Channel Stereo (ALL CH ST.) mode can reproduce a larger 
stereo sound field using all the connected (and activated) speakers.
All Channel Stereo can be used while reproducing 2 channel stereo 
source.
 When All Channel Stereo is selected, the DSP indicator lights on 
the display window.
All Channel Stereo reproductionIndicators on the display window
Digital signal format indicators
LPCM: Lights when Linear PCM signal comes...

Creating realistic sound fields
31
IMPORTANT
Before using the remote control for the 
following operation; 
• Set the remote control mode selector to 
AUDIO.The system is set up to automatically select the optimal surround 
mode for input signal from digital multichannel software.
When playing back 2 channel source, you can select the desired 
surround mode manually.
On the remote control:

When playing back digital multichannel software
The appropriate multichannel surround mode is automatically...

Creating realistic sound fields
32
On the remote control:
1Press TEST.
Check if you can hear the sounds through all the speakers at 
the equal level.
“TEST TONE” and the corresponding signal indicator starts 
flashing on the display window, and the test tone comes out of 
the speakers in the following order;

 Front left speaker ()  Center speaker ()  
Front right speaker (
)  Surround right speaker 
(
)  Surround left speaker ()  (back to the 
beginning)
2Adjust the speaker output levels (–10...

33
Advanced operations
This section explains advanced operations for disc playback using 
the remote control.
  shows the types of discs an operation is 
available for.
 Turn on your TV and select the correct input mode on the TV.
NOTE
If “” appears on the TV screen when pressing a button, the disc 
cannot accept an operation you have tried to do or information 
required for that operation is not recorded to the disc.
You can check disc information while the disc is loaded and you 
can use some...

Advanced operations
34
Basic operation on the on-screen bar
Example: When selecting the Repeat mode of DVD

During playback or while stopped
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
 The currently selected item shows green.
2Press Cursor 
/
 to move  to  .
3Press ENTER.
The pop-up window appears under the selected item.
 The current setting appears.
4Press Cursor 
/
 to select the desired 
option.
Each time you press the button, the options change.
5Press ENTER.
The...

Advanced operations
35
Locating a desired scene using a Video 
CD/SVCD menu with PBC
A Video CD or SVCD recorded with PBC has its 
own menus such as a list of contained songs. You 
can locate a specific scene by using these menus. 
(A
pg. 4)

When the menu appears on the TV screen during playback with 
PBC function
Press number buttons (1-10, +10) to select 
the number of the desired item.
The system starts playback from the selected item.
To select the number
Example:
To select 3: Press 3
.
To select...

Advanced operations
36
2Use number buttons (0-10, +10) to enter 
the desired title or group number.
The system starts playback from the first chapter/track/file of 
the selected title/group.
Example:
To select 8: Press 8.
To select 10: Press 10. 
Or press +10, then 0.
To select 20: Press +10, then 10.
Or press +10 twice, then 0.
To select 25: Press +10 twice, then 5.
• Specify the number within 5 seconds after pressing TITLE/
GROUP (i.e. while the display window shows “_ _” for the 
title/group number,...

Advanced operations
37
To select the other group
Press Cursor 
 to return to the group list, then press Cursor / 
to select the desired group.
To skip groups/tracks during playback
Press Cursor  repeatedly for forward-skip.
Press Cursor  repeatedly for reverse-skip.
To start playback by specifying the track number
Press number buttons (0-10, +10) to enter 
the track number.
Example:
To select 3: Press 3.
To select 14: Press +10, then 4.
To select 20: Press +10, then 10.
Or press +10 twice, then 0.
To...