JVC Th G60 Instructions

							17
Operation 
Operation
General features
Buttons Operations
Z (OPEN / CLOSE)  Opens or closes the disc tray.
X (PAUSE) During playback, press Xto pause playback.
Press Xrepeatedly to play Frame-by-Frame. 
SKIP (./ >)During playback, press SKIP (.or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
Press SKIP.twice briefly to step back to the previous
chapter/track.
SCAN (m/ M)During playback, press SCAN (mor M)repeatedly to
select the required scan speed. 
DVD :bb, bbb, bbbb, bbbbb, bbbbbb 
or 
BB, BBB, BBBB, BBBBB, BBBBBB
DivX disc, Video CD :bb, bbb, bbbb, bbbbb 
or 
BB, BBB, BBBB, BBBBB
WMA/MP3, Audio CD : m (X2, X4,  X8) or M (X2, X4, X8)
REPEAT During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD Video discs: Chapter/Title/Off
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
TOPMENU If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appears.
MENU The disc menu appears on the screen.
(SUBTITLE) During playback, press SUBTITLE repeatedly to select a
desired subtitle language.
SLOWIn the pause mode, press SCAN (mor M) to select the
required speed.
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
Video CD : T (1/2, 1/4, 1/8, 1/16)
Discs
VCDDVD
DivXDVD
DVD
DVD
ALL
WMAMP3ACD
DivXVCDDVD
ALL
DivXVCDDVD
ALL
ALL
   
						

							18
Additional features
Time Search 
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback. 
2. Press v/Vto select the time clock icon and 
“--:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
1.5 times speed playback 
You can play at 1.5 times speed.
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed on the disc.
1. During playback, press PLAY(B) to play at 1.5
times speed. “BX1.5” appears on the screen.
2. Press PLAY(B) again to exit.
Screen Saver
The screen saver appears when you leave the unit in
Stop mode for about five minutes. To cancel the
Screen Saver, press any button and then operate the
unit.
Last Scene Memory 
This receiver memorizes the last scene from the last
disc that is viewed. The last scene remains in the
memory even if you remove the disc from the receiver
or switch off the receiver. If you load a disc that has
the scene memorized, the scene is automatically
recalled.
Note:
This receiver does not memorize the scene of a disc if you
switch off the receiver before commencing to play the disc.
Mixed disc or USB Flash drive – MP3/WMA and
JPEG
When playing a disc or USB Flash drive contained with
MP3/WMA and JPEG files together, you can select
which menu of files you would like to play by pressing
TOPMENU.System Select
You must select the an appropriate system mode for
your TV system. If NO DISC appears in the display
window, press and hold PAUSE/STEP (X) remote
control for more than 5 seconds to be able to select a
system (PAL, NTSC).

 
When the selected system is not compatible with
the system of your TV, normal colour picture may not
be displayed.
NTSC:Select when DVD/CD Receiver is connected 
with NTSC-TV.
PAL:Select when DVD/CD Receiver is connected 
with PAL-TV.
DVD
WMAMP3ACDVCDDVD
DVD
 
						

							19
Operation 
Playing an Audio CD or
MP3/WMA file
This unit can play Audio CDs or MP3/WMA files.
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recording media or
Audio CD  a menu appears on the TV screen. 
Press v/ Vto select a track/file and then press PLAY
or ENTER, and playback starts. You can use variable
playback functions. Refer to the page 17.ID3 TAG
When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY.  (Song, Artist, Album,  Genre,  Comment)
Tips:
Press MENU to move to the next page.MP3 / WMA disc compatibility with this player is
limited as follows:
•Sampling frequency: within 32 - 48 kHz (MP3), 
within 24 - 48kHz (WMA)
•Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps
(WMA)
•The DVD/CD Receiver cannot read an MP3/WMA file
that has a file extension other than “.mp3” / “.wma”.
•CD-R physical format should be ISO 9660
•If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files.We recommend
that you use Easy-CD Creator, which creates an ISO
9660 file system.
•File names should have a maximum of 8 letters and
must incorporate an .mp3 or .wma extension. 
•They should not contain special letters such as  / ? * : “
< > l etc.
•The total number of files on the disc should be less than
999.
This DVD/CD Receiver requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible
playback.
Customers should note that permission is required in
order to download MP3 / WMA files and music from
the Internet. Our company has no right to grant such
permission. Permission should always be sought from
the copyright owner.
     
						

							20
Programmed Playback 
The program function enables you to store your
Favourite tracks from any disc in the receiver memory.
Aprogram can contain 300 tracks.
1. Insert a disc.
Audio CD and MP3/WMA Discs: 
2. Select a track on the “List” and then press PROG.
or select “ (Add)” icon and then press ENTER
to place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
Note:
You can add all tracks in the disc. Select “
(Add All)”  icon
then press ENTER.
3.Select the track you want to start playing on the
“Program” list. Press MENU to move to the next
page.
4. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
5. To resume normal playback from programmed
playback, select a track of AUDIO CD (or
MP3/WMA) list and then press PLAY.Repeat Programmed Tracks 
1. Press REPEAT when playing a disc. The repeat
icon appears.
2. Press REPEAT to select a desired repeat mode.
• TRACK: repeats the current track
• ALL: repeats all the tracks on programmed list.
• Off (No display): does not play repeatedly.
Erasing a Track from “Program” List 
1. Use vVto select the track that you wish to erase
from the Program list.
2. Press CLEAR. Alternatively, select “ (Delete)”
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks on the list.
Erasing the Complete Program List 
Use v/Vto select “ (Del all)” and then press
ENTER.
Note:
The programs are also cleared when the disc is removed,
the unit is switched to power off or the function is switched to
others.
         
						

							21
Operation 
Viewing a JPEG file
This unit can play discs with JPEG files.
Before playing JPEG recordings, read the notes on
JPEG Recordings on the right.
1. Insert a disc and close the tray.
The PHOTO menu appears on the TV screen.
2. Press v/Vto select a folder, and then press
ENTER. A list of files in the folder appears. 
If you are in a file list and want to return to the 
previous Folder list, use the v/Vbuttons on the
remote to highlight  and press ENTER.
3. If you want to view a particular file, press v/Vto
highlight a file and press ENTER or PLAY. While
viewing a file, you can press STOP to move to the
previous menu (JPEG menu).
Tips:

 
There are four Slide Speed options  : 
> (Slow), >> (Normal), >>> (Fast) and II (off).
Use v/V/b/Bto highlight the Speed. Then, use b/B
to select the option you want to use and then press
ENTER. 

 
If you set Speed option to Off, the slide is not active.
Slide Show
1. Highlight the file (not folder) which you like
beginning to slide show.
2. Select the slide speed. (Refer to the tips this page)
3. Use vVbBto highlight the  (Slide Show)
then press ENTER.
Note:
•
The sequence of slide show is from top to down, cannot
be reverse.
•Slide show cannot repeat automatically, you could start the
slide show again manually.
Still Picture 
1. Press PAUSE/STEP during the slide show. 
The DVD/CD Receiver will now go into the PAUSE
mode. 
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.
Moving to another File
Press SKIP (.or >) once during viewing a
picture to advance to the next or previous file.
Rotating the picture 
Press vVbBduring showing a picture to rotate the
picture clockwise or counter-clockwise.
JPEG disc compatibility with this player is
limited as follows:
•Depending upon the size and the number of
JPEG files, it could take a long time for the
DVD/CD Receiver to read the disc’s contents. If
you don’t see an on-screen display after several
minutes, some of the files may be too large —
reduce the resolution of the JPEG files to less
than 2M pixels as 2760 x 2048 pixels and burn
another disc.
•The total number of files and folders on the disc
should be less than 999.
•Some discs may not operate due to a different
recording format or the condition of disc.
•Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
•If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
•File names without “.jpg” extension will not be
able to be read by this DVD/CD Receiver. Even
though the files are shown as JPEG image files in
Windows Explorer.
         
						

							22
Playing a DivX Moviefile 
Using this DVD/CD Receiver you can play DivX disc.  
1. Insert a disc and close the tray. The MOVIE menu
appears on the TV screen.
2. Press v/Vto select a  folder and then press
ENTER. A list of files in the folder appears. If you
are in a file list and want to return to the Folder
list, use the v/Vbuttons on the remote to
highlight  and press ENTER.
3. If you want to view a particular file, press 
v/Vto highlight a file and press ENTER or PLAY. 
4. Press STOP to exit.
Notice for displaying the Divx subtitle
If the subtitle does not display properly during playback,
press and hold S-TITLE for about 3 seconds then press
S-TITLE to select another language code until the
subtitle is displayed properly
Tips:
Press MENU to move to the next page.
Notes:

 

Be sure to select “SUBTITLE ON” mode by
pressing the subtitle file every time before playing a
DivX file .

 

When the subtile has more than two languages in
the file, original subtile is only available.
DivX disc compatibility with this player is limited
as follows:
•Available resolution size of the DivX file is under
800x600 (W x H) pixel.
•The file name of the DivX subtitle is available by
45 characters. 
•If there is impossible code to express in the DivX
file, it may be displayed as   _  mark on the
display. 
•If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
•If the video and audio structure of recorded
files are not interleaved, either video or audio
is outputted. 
Playable DivX file
•.avi , .mpg , .mpeg , .divx
Playable Subtitle format
•SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
Playable Codec format
•DIVX3.xx , DIVX4.xx , DIVX5.xx , 
MP43 , 3IVX .
Playable Audio format
AC3 , DTS , PCM , MP3 , WMA .
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 
40 - 192kbps (WMA)
     
						

							23
Operation 
Presetting the Radio Stations
You can preset 50 stations for FM and AM (MW).
Before tuning, make sure that you have turned down
the volume.
1. Press FUNCTION on the remote control until FM
or AM (MW) appears in the display window.
2. And then every time you press FUNCTION, FM
and AM (MW) changes alternately.
3. Press and hold TUNING.(-/+) for about two
seconds until the frequency indication starts to
change, then release.
Scanning stops when the DVD/CD Receiver tunes in a 
station.
4. Press PROG./MEMO. on the remote control.
Apreset number will flash in the display window.
5. Press PRESET (-/+) on the remote control to
select the preset number you want.
6. Press PROG./MEMO. on the remote control again.
The station is stored. 
7. Repeat steps 3 to 6 to store other stations.
To tune in a station with a weak signal 
Press TUNING.(-/+) repeatedly in step 3 to tune in the
station manually.
To clear all the stored stations 
Press and hold PROG./MEMO. for about two seconds
and “ERASE ALL” is appeared in the display window
and then press PROG./MEMO. again, the stations are
cleared.

 
If you have accidentally entered into the ERASE
ALL mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
ERASE ALL will go off by itself and change to
normal mode.
Note:
If all stations have already been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash. 
To change the preset number, follow the steps 5-6 as
above.
Listening to the Radio
Preset radio stations in the DVD/CD Receiver’s
memory first (see “Presetting radio stations” on the
left).
1. Press FUNCTION until FM or AM (MW) appears in
the display window.
The last received station is tuned in.
2. Press PRESET (-/+) repeatedly on the remote
control to select the preset station you want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
3. Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or - on the
remote control repeatedly.
To turn off the radio 
Press POWER to turn the DVD/CD Receiver off or
select another function mode.
To listen to non-preset radio stations 



Use manual or automatic tuning in the step 2.



For manual tuning, press TUNING.(-/+) repeatedly.



For automatic tuning, press and hold TUNING.(-/+)
for about two seconds on the front panel.
To select a preset radio station directly
You can use the number buttons on the remote
control to select a preset radio station directly.
For example, to listen to the preset station 4, press 4
on the remote control. To listen to the preset station
19, press 1 and then 9 (within 3 seconds). 
For your reference

 
If an FM program is noisy
Press FM MODE. on the front panel or on the
Remote Control to make “MONO” appear in the
display window. There will be no stereo effect, but
the reception will improve. Press the button again
to restore the stereo effect.

 
To improve reception
Reorient the supplied antennas.
 
						

							24
RDS Operation
This unit is equipped with RDS (Radio Data System),
which brings a wide range of information to FM radio.
RDS, now being used in many countries, is a system
for transmitting station call signs or network
information, a description of station programme type
text message about the station or specifics of musical
selection and the correct time. 
RDS TUNING
When a FM station is tuned in and it contains RDS
data, the unit will automatically display the station’s
call sign and the RDS indicator will light in the Display
Window as well as indicators for the RDS services
programme (PS), programme type recognition (PTY),
Radio text (RT) and Clock Time (CT) if transmitted by
the station.
RDS DISPLAY OPTIONS
The RDS system is capable of transmitting a wide
variety of information in addition to the initial call sign
that appears when a station is first tuned. In normal
RDS operation the display will indicate the station
name, broadcast network or call letters. Pressing RDS
DISPLAYon the remote control enables you to cycle
through the various data types in the sequence:
(PS ↔ ↔
FREQUENCY↔ ↔
PTY↔ ↔
RT ↔ ↔
CT)

 
PS (Programme Service  name)-The name of the
channel is shown in the Display Window.

 
PTY (Programme type recognition)-The name of
the programme type is shown in the Display
Window.

 
RT (Radiotext)-A“text” message contains special
information from the broadcast station. Note that
this message may scroll across the display to
permit message.

 
CT (Time controlled by the channel)-Enables
the unit to receive the actual time and show it in
the Display Window.
Note:
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not being transmitted, the
Display Window will show a PTY NONE, RT NONE,
CT NONE, or PS NONE message.
NEWS News
AFFAIRS Current Affairs
INFO Information
SPORT Sports
EDUCATE Educational
DRAMA Drama
CULTURE Culture
SCIENCE Science
VARIED Varied Speech Programme
POP M Popular Music
ROCK M Rock Music
EASY M Easy Listening Music
LIGHT M Light Music
CLASSICS Classical Music
OTHER M Other Music
WEATHER Weather Information
FINANCE Financial Programmes
CHILDREN Children’s Programmes
SOCIAL Social Affairs  Programmes
RELIGION Religious Broadcasts
PHONE IN Phone-In Programmes
TRAVEL Travel and Touring
LEISURE Leisure and Hobby
JAZZ Jazz Music
COUNTRY Country Music 
NATION M National Music
OLDIES Oldies Music
FOLK M Folk Music
DOCUMENT Documentary Programmes
TEST Station Alarm Test  Message
ALARM ! Emergency Broadcast Information   
Programme Search (PTY)
Amajor benefit of RDS is its ability to encode
broadcasts with Programme Type (PTY) codes that
indicate the type of material being broadcast. The
following list shows the abbreviations used to
indicate each PTY along with an explanation of the
PTY.
You may search for a specific Programme Type (PTY)
by following these steps:
1. Press FUNCTION to select the FM mode.
2. Press PTY SEARCH on the remote control, the
display will show the last PTY in use.
3. Press PTY SEARCH repeatedly to select a
desired PTY.
4. When the PTY is selected, press TUNING (# #
/3 3
).
The unit will go into an automatic search mode.
When a station is tuned, the search will stop.
 
						

							25
Operation 
Sleep Timer Setting
You can set the DVD/CD Receiver to turn off
automatically at a specified time.
1.Press SLEEP to set the desired sleep time.
The SLEEP indicator and the sleep time appears in the
display window.
2.Each time you press SLEEP the setting
changes in the following order.
SLEEP 180 →150 →120→90 →80 →70 →60→50 →
40 →30 →20 →10 →OFF (No display)
Note:
You can check the remaining time before the DVD/CD
Receiver turns off.
Press SLEEP. The remaining time appears in the 
display window.
Dimmer
This function will change the brightness of the display
window on the front panel during in power-on status. 
Press the DIMMER repeatedly.
Muting
Press MUTING to mute your unit. 
You can mute your unit in order, for example, to
answer the telephone, the “MUTING” indicator flashes
in the display window. 
Note:
This muting doesn’t affect the audio output to HDMI; it
only mutes the output of speakers connected to the
unit.
Setting the disc ejection lock
You can lock the disc tray to prevent the disc form
being ejected.
When the main unit is turned off, hold down the STOP
key at the front panel for 5 seconds 
If you attempt to open the disc tray by pressing
OPEN/CLOSE key, the disc tray does not open and
“LOCKED” appears in the display window.
To cancel the disc ejection lock, hold down the STOP
key at the front panel for 5 seconds again when the
main unit is turned off.
“UNLOCKED” is displayed in the display window.
Note:
Before the main unit is turned off, DVD/CD function
should be selected.
Enjoying audio form an external
source
You can enjoy audio form an external source through
your unit.
Press INPUT repeatedly to select the desired input
source. - AUX, AUX OPT, TV-AUDIO, AUDIO IN, USB
Setting the surround mode
You can select the Dolby Pro Logic II. Press
SURROUND to change surround mode repeatly.
[BYPASS] mode : Software with multichannel
surround audio signals is played according to the
way it was recorded.
[PL II MOVIE] mode: The Movie mode is for use
with stereo television shows and all programs
encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality
of discrete 5.1-channel sound.
[PL II MUSIC] mode: The Music mode is for use
with any stereo music recordings.
[PL II MATRIX] mode: The Matrix mode is the same
as the Music mode except that the directional
enhancement logic is turned off. It may be used to
enhance mono signals by making them seem
“larger.” The Matrix mode may also find use in auto
systems, where the fluctuations from poor FM
stereo reception can otherwise cause disturbing
surround signals from a logic decoder. The ultimate
“cure” for poor FM stereo reception may be simply
to force the audio to mono.
Notes:
•
In some of surround modes, some speakers maybe
no sound or low sound, it depends on the mode of
surround and the source of audio, it is not defective.
•You may need resetting the surround mode, after
switch the input, sometimes even after the sound
track changed.
 
						

							26
Area CodeAfghanistan AFArgentina ARAustralia AUAustria ATBelgium BEBhutan BTBolivia BOBrazil BRCambodia KHCanada CAChile CLChina CNColombia COCongo CGCosta Rica CRCroatia HRCzech Republic CZDenmark DKEcuador ECEgypt EG
El Salvador SV
Area CodeEthiopia ETFiji FJFinland FIFrance FRGermany DEGreat Britain GBGreece GRGreenland GLHeard and McDonald IslandsHMHong Kong HKHungary HUIndia INIndonesia IDIsrael ILItaly ITJamaica JMJapan JPKenya KEKuwait KWLibya LY
Luxembourg LU
Area CodeMalaysia MYMaldives MVMexico MXMonaco MCMongolia MNMorocco MANepal NPNetherlands NLNetherlands Antilles ANNew Zealand NZNigeria NGNorway NOOman OMPakistan PKPanama PAParaguay PYPhilippines PHPoland PLPortugal PTRomania RO
Russian Federation RU
Area CodeSaudi Arabia SASenegal SNSingapore SGSlovak Republic SKSlovenia SISouth Africa ZASouth Korea KRSpain ESSri Lanka LKSweden SESwitzerland CHTaiwan TWThailand THTurkey TRUganda UGUkraine UAUnited States USUruguay UYUzbekistan UZVietnam VN
Zimbabwe ZW
Area Codes 
Choose a area code from this list.
Language CodeAbkhazian 6566Afar 6565Afrikaans 6570Albanian 8381Ameharic 6577Arabic 6582Armenian 7289Assamese 6583Aymara 6588Azerbaijani 6590Bashkir 6665Basque 6985Bengali; Bangla 6678Bhutani 6890Bihari 6672Breton 6682Bulgarian 6671Burmese 7789Byelorussian 6669Cambodian 7577Catalan 6765Chinese 9072Corsican 6779Croatian 7282Czech 6783Danish 6865Dutch 7876English 6978Esperanto 6979Estonian 6984
Faroese 7079
Language CodeFiji 7074Finnish 7073French 7082Frisian 7089Galician 7176Georgian 7565German 6869Greek 6976Greenlandic 7576Guarani 7178Gujarati 7185Hausa 7265Hebrew 7387Hindi 7273Hungarian 7285Icelandic 7383Indonesian 7378Interlingua 7365Irish 7165Italian 7384Japanese 7465Javanese 7487Kannada 7578Kashmiri 7583Kazakh 7575Kirghiz 7589Korean 7579Kurdish 7585Laothian 7679Latin 7665
Latvian, Lettish 7686
Language CodeLingala 7678Lithuanian 7684Macedonian 7775Malagasy 7771Malay 7783Malayalam 7776Maltese 7784Maori 7773Marathi 7782Moldavian 7779Mongolian 7778Nauru 7865Nepali 7869Norwegian 7879Oriya 7982Panjabi 8065Pashto, Pushto 8083Persian 7065Polish 8076Portuguese 8084Quechua 8185Rhaeto-Romance 8277Rumanian 8279Russian 8285Samoan 8377Sanskrit 8365Scots Gaelic 7168Serbian 8382Serbo-Croatian 8372Shona 8378
Sindhi 8368
Language CodeSinghalese 8373Slovak 8375Slovenian 8376Somali 8379Spanish 6983Sudanese 8385Swahili 8387Swedish 8386Tagalog 8476Tajik 8471Tamil 8465Tatar 8484Telugu 8469Thai 8472Tibetan 6679Tigrinya 8473Tonga 8479Turkish 8482Turkmen 8475Twi8487Ukrainian 8575Urdu 8582Uzbek 8590Vietnamese 8673Volapük 8679Welsh 6789Wolof 8779Xhosa 8872Yiddish 7473Yoruba 8979
Zulu 9085
Language Codes
Use this list to input your desired language for the following initial settings: 
Disc Audio, Disc Subtitle, Disc Menu.