JVC Th C60 Instructions

28
When Resume Playback is set to “ON” (see page 
35) and you stop playback by the following 
operations, the position where playback has been 
stopped is stored. (RESUME indicator lights on 
the display window.)
• Turning off the power* (See page 16.)
• Pressing 7 once
*Only when playing back a DVD.
To start playback from the stored position
Press 3 (play button) or DVD.
• There may be a case when 3 (play button) does not work after 
changing the source. In this case, select DVD as a source.
• Pressing...

29
7During playback of a disc/file containing 
audio in several languages
When using the AUDIO button:
1Press AUDIO.
Example (DVD VIDEO): “ENGLISH” is selected out of 3 audio 
languages recorded.
2Press AUDIO repeatedly or press Cursor 
Y/5 to select the desired audio.
When using the on-screen bar:
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2Press Cursor 3/2 to highlight  .
3Press ENTER.
4Press Cursor Y/5 to select the desired 
audio.
5Press ENTER.
6Press ON SCREEN.
The on-screen...

30
Changing the VFP setting
The VFP (Video Fine Processor) function enables 
you to adjust the picture character according to 
the type of programming, picture tone or 
personal preference (except when connecting the TV through 
HDMI MONITOR OUT terminal).
7During playback
1Press VFP.
The current VFP settings appear on the TV screen.
Example:
2Press Cursor 3/2 repeatedly to select 
the VFP mode.
• NORMAL: Normally select this.
• CINEMA: Suitable for movies.
When you select “NORMAL” or “CINEMA”, press VFP...

31
You can play tracks on a disc in random order.
7While stopped
1Press PLAY MODE repeatedly until 
 appears on the TV screen.
RND indicator lights on the display window.
2Press 3 (play button).
• When more than one discs are loaded, the system starts 
Random Playback of the next disc after completing current 
disc playback.
To quit Random mode
While stopped, press PLAY MODE repeatedly until both program 
window and   disappear from the TV screen.
You can also clear the Random mode by turning off the...

32
Repeating a desired part [A-B Repeat]
You can repeat playback of a desired part by 
specifying the beginning (point A) and 
ending (point B).
7During playback
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2Press Cursor 3/2 to highlight  .
3Press ENTER.
4Press Cursor Y/5 repeatedly to select 
“A - B ” .
5Press ENTER at the beginning of the 
part you want to repeat (point A).
The repeat mode indicator “ ” appears on the display 
window.
6Press ENTER at the end of the part you 
want...

33
• You can change the language used in the setup menus. See “Menu 
description” below.
Basic operation on the setup menus
IMPORTANT
Before using the remote control for the 
following operation;
1 Set the remote control mode selector 
to AUDIO.
2 Press DVD or USB MEMORY.
7While stopped
1Press SET UP.
2Follow the instructions that appear on 
the TV screen.
: Language menu (LANGUAGE)
7MENU LANGUAGE
Some DVDs have their own menus in multiple languages.
 Select the initial language*.
7AUDIO LANGUAGE
Some...

34
: Picture menu (PICTURE)
7MONITOR TYPE
You can select the monitor type to match your TV when you play 
DVDs recorded in the picture’s height/width ratio of 16:9.
•4:3 PS (Pan Scan conversion)
Select this when the aspect ratio of your TV is 4:3 (conventional 
TV). While viewing a wide screen picture, the black bars do not 
appear, however, the left and right edges of the pictures will not 
be shown on the screen.
•4:3 LB (Letter Box conversion)
Select this when the aspect ratio of your TV is 4:3...

35
: Speaker setting menu (SPK. SETTING)
7Level menu (LEVEL)
FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/CENTER 
SPEAKER/SURROUND RIGHT SPEAKER/SURROUND LEFT 
SPEAKER
While monitoring the test tone, adjust the center and surround 
speakers volume as much as that of the front speakers.
You can adjust the output level in the -6 dB to +6 dB range.
TEST TONE*
Outputs the test tone.
*The test tone comes out of all of the activated speakers in the 
following sequence:
s Front left speaker s Center speaker s Front...

36
IMPORTANT
Before using the remote control for the 
following operation; 
1 Set the remote control mode selector to 
AUDIO.
2 Press FM/AM.On the remote control:
1Press FM/AM repeatedly to select the 
band.
Example:
When the system is tuned in to 810 kHz.
2Press TUNING9/( repeatedly until 
you find the frequency you want.
When you hold down the button until the system starts 
searching for stations and then release it, the system stops 
searching automatically when a station of sufficient signal...

37
Once a station is assigned to a channel number, the station can be 
quickly tuned in. You can preset 30 FM and 15 AM stations.
7To preset the stations
1Tune in the station you want to preset.
• If you want to store the FM reception mode for an FM 
station, select the reception mode you want. See “Selecting 
the FM reception mode” on the right column.
Example: When the system is tuned in to 103.5 MHz.
2Press MEMORY.
While “CH” and “_ _” are flashing:
3Press number button(s) (1-10, h10) to 
select a...