JVC Sl42bc Manual

							One Time Setup Wizard 
For Wireless Connection, the TV will show a list of available networks, 
use remote to choose your home network, press OK and key in security 
password by using remote QWERTY keypad 
 
 
Auto Channels Scan 
Ensure Antenna or Cable TV input cable is connected to DTV / TV jack, 
choose Start Scan to begin.   
Note: Channels scanning may take a few minutes 
 
 
On Finish screen, press OK button to save and exit the Setup Wizard 
 
Align the remote IR emitter to 
TV’s IR receiver lens  
						

							Viewing 3D Content 
 
Your TV is equipped for viewing 3D movies, games, and television 
broadcasts (where available).  After installing your TV at the optimum 
distance and height for 3D viewing (refer to previous section), you can 
then connect your 3D device to the TV.  To view 3D content, you will 
need the following items: 
 
 A 3D source device, such as a 3D Blu-
Ray player, 3D Game Console, and/or 
Cable TV or Satellite TV converter box 
that can decode 3D content 
 
 A 3D media, such as Blu-ray 3D movie 
disc 
  An HDMI connection cable  
 
 XinemaView 3D™ Glasses (included 
with TV) 
Connecting Your 3D Source Device 
Connecting a 3D source device to your TV is very simple: 
1. Connect one end of the HDMI cable to the HDMI connector jack on 
your device. 
2. Connect the other end of the HDMI cable to one of the available 
HDMI connector jacks at the rear of you TV. 
 
 
   
						

							Viewing 3D Content 
 
Start Viewing Your 3D Contents 
1. Turn on the TV and 3D source device 
2. Insert 3D media (game disc, Blu-ray disc, etc)  
3. TV will detect and play the 3D content automatically. Put on a pair 
of 3D glasses and enjoy. 
4. To switch between 2D and 3D mode, press 3D button on remote 
and select desirable viewing mode 
 
   
						

							Viewing 3D Content 
 
3D HEALTH AND SAFETY 
 Should you experience discomfort while viewing 3D video images, take a 10-to-15 minute break or try viewing the video 
in 2D.  Consult your health care provider, if necessary. 
 Due to vision development concerns, Do Not allow children under the age of 6 to view 3D video images.  Parents should 
supervise children closely to prevent prolonged 3D viewing. 
 Keep proper distance from TV while viewing 3D videos or images.  Minimum distance between you and the TV screen 
should be 7 feet.  Refer to Section 2: TV Placement for Best 3D Experience for proper TV distance and height from 
viewing audience. 
 For those with epilepsy, have a family history linked to epilepsy, or have experienced epileptic-type symptoms in the 
past, consult your health care provider before viewing 3D videos or images. 
 Avoid viewing 3D content when under the influence of alcohol. 
 Viewing 3D content may cause dizziness and/or disorientation for some viewers.  To avoid injury, do not place you the 
TV at or near stairwells, balconies, or wires.  Clear viewing area of any objects that can break and cause injury when 
accidentally hit. 
  
						

							I.C.E™ Apps & Multimedia 
ICE Apps and Multimedia Operations 
The TV equipped with I.C.E™ (Internet Connected Experience) platform 
which provides connectivity to popular internet content streaming 
services.   
Note: To access any of the pre-loaded ICE applications, make sure the TV is 
connected to the Internet. 
On the remote, press the ICE Apps button to display the ICE 
applications screen. 
 
 
Use the left and right direction buttons to bring the desired app icon to 
the middle of the screen, and then press the OK button to select the 
application. Follow the instruction on screen to setup* each application. 
 
To exit an application, press the Exit button on remote.  
New ICE Apps Update:  
With internet connection setup, the TV will periodically look for new 
ICE Apps, as well as other TV software update, available in server.  The 
TV will automatically download newest ICE apps and software update. 
NOTE:  
 ICE apps are software provided by the content provider.  You may need to 
sign up or use an existing account to use the selected ICE apps. 
 Some apps are free, but some may charge monthly fee or pay-per-view fee.  
Read through the service terms for each app.  Contact the content provider 
for any question regarding their service. 
 All Apps are subject to change without notice  
						

							I.C.E™ Apps & Multimedia 
USB Multimedia control 
              
To playback multimedia content in USB flash memory, plug in your USB 
flash memory to the TV USB port, press MULTIMEDIA button on 
remote, or press ICE App button and choose multimedia icon 
Note:  
 The TV is capable of photos, music and video playback.  However, due to 
the wide variety of multimedia file formats.  Some formats may not be 
supported. 
 It is recommended to use USB flash memory ONLY.  USB external hard disk 
drive (HDD) is not supported due to its higher power consumption 
  
						

							TV Operation – TV Channels 
Changing the Channel 
On the remote control, use the number keys to select a channel. 
NOTE: When a channel is selected with the number keys, there will be 
a short delay before the TV changes the channel.  To change the 
channel immediately, press OK after selecting a channel. 
Browsing Channels 
To increase or decrease the channel: 
1 On the remote control, press button 
2 At rear of TV, press the CHANNEL UP or CHANNEL DOWN buttons 
Selecting Analog Channels 
1~9 Press 1~9 as needed.  For example: to select 
channel 2, press 2, then press OK. 
10~99 Press the 2 digits in order.  For example: to select 
channel 15, press 1, 5, and then press OK. 
100~135 Press the 3 digits in order.  For example: to select 
channel 130, press 1, 3, 0, and then press OK. 
Selecting Digital Channels 
Press the first two or three digits, press the – button, and then press 
the remaining digit(s).  For example: to select channel 15-1, press 1, 5, -
,1, and then press OK. 
 
   
						

							TV Operation – TV Channels 
Selecting by Channel List 
All channels with network signal are listed on the Channel List screen.  
You can select channels from this screen. 
1 Press OK to display Channel List screen. 
2 Press up or down direction buttons to select a channel number, 
and then press OK. 
3 Press Exit to close Channel List screen. 
Mute 
Press the Mute button to turn off the sound.  To turn on the sound, 
press the Mute button again. 
Setting the Sleep Timer 
Use the Sleep timer to automatically turn off the TV after a preset 
amount of time has elapsed. 
1 Press Sleep button to display Sleep Timer screen. 
2 Press Sleep button repeatedly, or use up and down direction 
buttons to select desired sleep time, and then press OK. 
To cancel sleep mode, select Timer Off on Sleep Timer screen, and then 
press OK. 
   
						

							TV Operation – Aspect Ratio 
Set Aspect Ratio 
 
Display aspect allows users to adjust viewing aspect ratio.  To access 
 Press Wide button to display Screen Mode display, or 
 Press MENU, then choose Wide 
Normal 
When watching a 4:3 content, 
the TV displays a standard 
picture with black side bars.  
When viewing a 16:9 content, it 
displays a full picture.  
Wide 
Applying to 4:3 content, the 
picture is stretched horizontally 
to fill the width of the screen.  
Applying to 16:9 content, the 
image is slightly overscanned.   
						

							TV Operation – Aspect Ratio 
Zoom 
The entire picture is uniformly 
enlarged to retain its original 
proportion. However, some parts 
of the picture may be hidden.  
Stretch 
The picture is stretched 
horizontally on the left and right 
sides.  Only available in 16:9 
content.  
Panoramic 
The picture is stretched 
horizontally on the left and right 
sides to fill the width of the 
screen.  The center of the picture 
is not stretched.  
 
 
 
Notes: 
 Panoramic mode is only available on 4:3 contents. 
 Stretch is only available in 16:9 contents.