Home > JVC > Receiver > JVC Rx110 Manual

JVC Rx110 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual JVC Rx110 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Data Size:  B6L (182 mm x 128 mm)
    Book Size:  B6L (182 mm x 128 mm)
    ENGLISH
    GET0945-001A [U/UI]
    KD-X210 / KD-X110
    DIGITAL MEDIA RECEIVERINSTRUCTION MANUALPlease read all instructions carefully before 
    operation to obtain the best possible performance 
    from the unit.
    EN_KD-X210[U]1.indd   1 EN_KD-X210[U]1.indd   116/10/2013   10:00:52 AM
    16/10/2013   10:00:52 AM 
    						
    							2
    Data Size:  B6L (182 mm x 128 mm)
    Book Size:  B6L (182 mm x 128 mm)
    CONTENTSBEFORE USE
     Warning  Do not operate any function that takes your attention away from safe dri\
    ving.
     CautionVolume setting:
    •  Adjust the volume so that you can hear sounds outside the car to prevent\
     accidents.
    •  Lower the volume before playing digital sources to avoid damaging the sp\
    eakers by the sudden increase of the output level.
    General:
    •  Avoid using the USB device or iPod/iPhone if it might hinder safe drivin\
    g.
    •  Make sure all important data has been backed up. We shall bear no respon\
    sibility for any loss of recorded  data.
    •  Never put or leave any metallic objects (such as coins or metal tools)\
     inside the unit, to prevent a short  circuit.
    Remote control (RM-RK52):
    •  Do not leave the remote control in hot places such as on the dashboard.
    •  The Lithium battery is in danger of explosion if replaced incorrectly. R\
    eplace it only with the same or  equivalent type.
    •  The battery pack or batteries shall not be exposed to excessive heat suc\
    h as sunshine, fire or the like.
    •  Keep the battery out of reach of children and in its original packaging \
    when not in used. Dispose of used  batteries promptly. If swallowed, contact a physician immediately.
    BEFORE USE  2
    BASICS 3
    GETTING STARTED  4
    USB / iPod  5
    RADIO 7
    AUX 8
    Pandora®
     (for KD-X210)
    (Applicable for Australia or New Zealand 
    models only)
     9
    AUDIO SETTINGS  10
    DISPLAY SETTINGS  11
    MORE INFORMATION  12
    TROUBLESHOOTING 13
    INSTALLATION / 
    CONNECTION 14
    SPECIFICATIONS 16
    How to read this manual
    •  Operations are explained mainly  using buttons on the faceplate of 
    KD-X110.
    • [XX] indicates the selected items.
    • ( XX) indicates references are 
    available on the stated page.
    MaintenanceCleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft 
    cloth.
    Cleaning the connector: Detach the faceplate and clean the connector 
    gently with a cotton swab, being careful not to damage the connector.
    Connector (on the reverse 
    side of the faceplate)
    EN_KD-X210[U]f.indd   2 EN_KD-X210[U]f.indd   2 10/30/2013   4:07:42 PM
    10/30/2013   4:07:42 PM 
    						
    							3
    Data Size:  B6L (182 mm x 128 mm)
    Book Size:  B6L (182 mm x 128 mm)
    BASICS
    Remote control (RM-RK52)
    ToDo this (on the faceplate) Do this (on the remote control)
    Turn on the power
    Press B /SOURCE.
    •  Press and hold to turn off the power. ( not available )
    Adjust the volume Turn the volume knob. Press VOL + or VOL –.
    Press the volume knob to mute the sound or pause playback.
    •  Press again to cancel. Press 
     to mute the sound or pause playback.
    •  Press again to cancel.
    Select a source • Press B /SOURCE repeatedly.
    • Press  B /SOURCE, then turn the volume knob within 2 seconds. Press SOURCE repeatedly.
    Change the display 
    information Press DISP repeatedly. 
    ( 12)•  Press and hold to scroll the current display information.
    ( not available )
    Attach
    How to resetDetach
    Your preset adjustments 
    will also be erased.
    Faceplate
    Volume knob
    (turn/press)
    Detach  button Display window
    Pull out the insulation sheet 
    when using for the first time.How to replace the battery Remote sensor
    (Do not expose to bright sunlight.)
    KD-X210
    KD-X210
    ENGLISH   |
    EN_KD-X210[U]1.indd   3 EN_KD-X210[U]1.indd   3
    14/10/2013   3:52:47 PM
    14/10/2013   3:52:47 PM 
    						
    							4
    Data Size:  B6L (182 mm x 128 mm)
    Book Size:  B6L (182 mm x 128 mm)
    GETTING STARTED
    Cancel the demonstration
    1 
    Press and hold MENU.2 Turn the volume knob to select [DEMO], then press the knob.3 Turn the volume knob to select [DEMO OFF], then press the knob.4 Press MENU to exit.
    Set the clock
    1 
    Press and hold MENU.2 Turn the volume knob to select [CLOCK], then press the knob.3 Turn the volume knob to select [CLOCK SET], then press the knob.4 Turn the volume knob to make the settings, then press the knob.
      Day  Hour  Minute5 Turn the volume knob to select [24H/ 12H], then press the knob.6 Turn the volume knob to select [12 HOUR] or [24 HOUR], then press the 
    knob.
    7 Press MENU to exit.
    Set the basic settings
    1 
    Press and hold MENU.2 Turn the volume knob to make a selection (see the following table), 
    then press the knob.
    3 Press MENU to exit.
    To return to the previous setting item or hierarchy, press G.
    1
    2
    Default: XX
    CLOCK
    CLOCK ADJ
    AUTO: The clock time is automatically set using the Clock Time (CT) dat\
    a in 
    FM Radio Data System signal. ; OFF: Cancels.
    CLOCK DISPON: The clock time is shown on the display even when the unit is turned\
     
    off. ; OFF: Cancels.
    SETTINGS
    BEEP
    ON: Activates the keypress tone. ; OFF: Deactivates.
    SRC SELECT
    AM
     *ON: Enables AM in source selection. ; OFF: Disables.
    SW1 *ON: Enables SW1 in source selection. ; OFF: Disables.
    SW2 *ON: Enables SW2 in source selection. ; OFF: Disables.
    PANDORA *(For KD-X210)ON: Enables PANDORA in source selection. ; OFF: Disables.
    AUX *ON: Enables AUX in source selection. ; OFF: Disables. ; BT ADAPTER: Select 
    when the KS-BTA100 Bluetooth adapter is connected to the auxiliary input\
     
    jack 
    ( 8). The source name will change to BT AUDIO.
    F/W UPDATE
    SYSTEM
    F/W xxxx
    YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not 
    activated).
    For details on how to update the firmware, see: 
    .
    *  Not displayed when the corresponding source is selected.
    3
    EN_KD-X210[U]f.indd   4 EN_KD-X210[U]f.indd   4 10/30/2013   9:22:13 AM
    10/30/2013   9:22:13 AM 
    						
    							5
    ENGLISH   |
    Data Size:  B6L (182 mm x 128 mm)
    Book Size:  B6L (182 mm x 128 mm)
    USB / iPod
    KD-X210
    KD-X210
    To Do this
    Select a file 
    Press S/ T (or press H / I on RM-RK52).
    Select a folder  *
    2Press 1 
    K / 2 J (or press J / K on RM-RK52).
    Reverse/
    Fast-forward Press and hold S/ 
    T (or press and hold H / I on RM-RK52).
    Repeat play  *
    3Press 4 
    B repeatedly to make a selection.
    •  JVC Playlist Creator (JPC) / JVC Music Control (JMC) file 
    ( 12): TRACK RPT, 
    RPT OFF
    •  MP3/WMA/WAV/FLAC file: TRACK RPT, FOLDER RPT, RPT OFF
    •  iPod: ONE RPT, ALL RPT, RPT OFF
    Random play  *
    3Press 3 
    A repeatedly to make a selection.
    •  MP3/WMA/WAV/FLAC file or JPC / JMC file: FOLDER RND, ALL RND,  RND OFF
    •  iPod: SONG RND, ALL RND, RND OFF
    *
    1  Do not leave the cable inside the car when not using.
    *2  Only for MP3/WMA/WAV/FLAC files. This does not work for iPod.
    *3  For iPod: Applicable under [HEAD MODE] only.
    Start playback
    The source changes automatically and 
    playback starts.
    USB
    iPod/iPhone (for KD-X210)
    •  You can also change the source from the 
    other source to iPod by pressing iPod.
    Press 5 iPod MODE repeatedly to select the 
    control mode (
    [HEAD MODE] / [IPHONE MODE]).
    USB input terminal USB input terminal
    USB 2.0 cable
    *1 
    (commercially available)
    (Accessory of the iPod/iPhone)
    *1
    EN_KD-X210[U]1.indd   5 EN_KD-X210[U]1.indd   5 10/22/2013   2:02:13 PM
    10/22/2013   2:02:13 PM 
    						
    							6
    Data Size:  B6L (182 mm x 128 mm)
    Book Size:  B6L (182 mm x 128 mm)
    Select a file from a list
    For iPod: Applicable only when [HEAD MODE] is selected. ( 5)1 Press MENU2 Turn the volume knob to make a selection, then press the knob. •  MP3/WMA/WAV/FLAC file: Select the desired folder, then a file. •  iPod or JPC / JMC file: Select the desired file from the list (PLAYLIST\
    S, ARTISTS, ALBUMS, SONGS, PODCASTS *
    , GENRES, COMPOSERS *
    , 
    AUDIOBOOKS *
    ).
     *   Only for iPod.
    If you have many files....
    You can search through them quickly (on step 
    2 above) by turning the 
    volume knob quickly.
    •  Not applicable for iPod.
    Select a song by name
    (For KD-X210)
    While listening to the iPod and [HEAD MODE] is selected ( 5)....
    If you have many folders or files, you can search through them quickly 
    according to the first character (A to Z, 0 to 9 and OTHERS).
    •  “OTHERS” appear if the first character is other than A to Z, 0 \
    to 9.
    1 Press MENU .2 Turn the volume knob to select the desired list, then press the 
    knob.
    3 Press 1  K / 2 J or turn the volume knob quickly to select the desired 
    character.
    4 Turn the volume knob to select the desired folder or file, then press 
    the knob.
    Change the USB drive
    When a smartphone (Mass Storage Class) is connected to the USB input 
    terminal, you can select its internal memory or external memory (such a\
    s an 
    SD card) to playback the stored songs.
    You can also select the desired drive to playback when a multiple drives\
     
    device is connected.
    Press number button 5 repeatedly to select the desired drive.
     (or)
    1 Press and hold MENU .2 Turn the volume knob to select [USB/IPOD], then press the knob.3 Turn the volume knob to select [USB], then press the knob.4 Press the volume knob to select [DRIVECHANGE].
        The next drive is selected automatically.
    Repeat steps 1 to 4 to select the following drives.
    Selectable items: 
    [DRIVE 1] to [DRIVE 5]
    Change the playback speed of the Audiobook
    (For KD-X210)
    While listening to the iPod and [HEAD MODE] is selected ( 5)....1 Press and hold MENU .2 Turn the volume knob to select [USB/IPOD], then press the knob.3 Turn the volume knob to select [IPOD], then press the knob.4 Turn the volume knob to make a selection, then press the knob.
      BOOK NORMAL / BOOK FASTER / BOOK SLOWER: Select the desired playback 
    speed of the Audiobooks sound file in your iPod/iPhone.
        (Default: Depends on your iPod/iPhone setting.)
    •  To return to the previous setting item or hierarchy, press G.
    •  To cancel, press MENU.
     USB / iPod
    EN_KD-X210[U]1.indd   6 EN_KD-X210[U]1.indd   6 14/10/2013   3:52:48 PM
    14/10/2013   3:52:48 PM 
    						
    							7
    ENGLISH   |
    Data Size:  B6L (182 mm x 128 mm)
    Book Size:  B6L (182 mm x 128 mm)
    RADIO
    “ST” lights up when receiving an FM stereo broadcast with sufficie\
    nt 
    signal strength.
    Search for a station
    1 
    Press B  /SOURCE to select FM, AM, SW1 or SW2.2 Press S/  T (or press H / I on RM-RK52) to search for a station 
    automatically.
     (or) Press and hold S/  T (or press and hold H / I on RM-RK52) until 
    “M” flashes, then press repeatedly to search for a station manuall\
    y.
    Store a station
    You can store up to 18 stations for FM and 6 stations for AM/SW1/SW2.
    While listening to a station....
    Press and hold one of the number buttons (1 to 6) to store.
     (or)1 Press and hold the volume knob until “PRESET MODE” flashes.2 Turn the volume knob to select a preset number, then press the 
    knob.
        The preset number flashes and “MEMORY” appears.
    •  To select a stored station: Press one of the number buttons (1 to 6).
     (or)
     Press  MENU, then turn the volume knob to select a preset number and 
    press the knob to confirm.
    Search for your favorite program (PTY Search)
    Available only for FM source.1 Press and hold G.2 Turn the volume knob to select a PTY code, then press the knob to 
    start searching.
        If there is a station broadcasting a program of the same PTY code as  you have selected, that station is tuned in.
    PTY code: NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M 
    (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT
    Activate TA Standby Reception
    Available only for FM source.
    Press G  .
    The unit will temporarily switch to Traffic Announcement (TA) (if 
    available) from any source other than AM.
    •  To deactivate, press G again.
    Other settings
    1 
    Press and hold MENU.2 Turn the volume knob to select [TUNER], then press the knob.3 Turn the volume knob to make a selection ( 8), then press the 
    knob.
    4 Press MENU to exit.
    To return to the previous setting item or hierarchy, press G.
    EN_KD-X210[U]1.indd   7 EN_KD-X210[U]1.indd   7 14/10/2013   3:52:48 PM
    14/10/2013   3:52:48 PM 
    						
    							8
    Data Size:  B6L (182 mm x 128 mm)
    Book Size:  B6L (182 mm x 128 mm)
    RADIO
    Use a portable audio player
    1 
    Connect a portable audio player (commercially available).
     
    2 Select [ON] for [AUX] in [SRC SELECT]. ( 4)3 Press B  /SOURCE to select AUX.4 Turn on the portable audio player and start playback.
    Use a 3-core plug head stereo mini plug for optimum audio 
    output.
    Use a Bluetooth® device 
    1 
    Connect the Bluetooth adapter, KS-BTA100 (separately purchased).
     
    2 Register (pair) the Bluetooth device with KS-BTA100.3 Select [BT ADAPTER] for [AUX] in [SRC SELECT]. ( 4).4 Press B  /SOURCE to select BT AUDIO.5 Start using the Bluetooth device.
    For details, refer to the instruction manual of KS-BTA100.
    3.5 mm stereo mini plug with “L” shaped connector 
    (commercially available)
    Portable audio player
    Auxiliary input jack
    Auxiliary input jack Blue/white
    Blue/white: Remote
    Black Black: Ground
    Brown Brown: Tel muting Wiring harness of the unit 
    ( 15)
    AUX 
    RADIO TIMERTurns on the radio at a specific time regardless of the current source.1 ONCE/ DAILY/ WEEKLY/ OFF: Select how often the timer will be turned 
    on.
    2 FM/ AM/ SW1/ SW2: Select the FM, AM, SW1 or SW2 band.3 01 to 18 (for FM)/ 01 to 06 (for AM/SW1/SW2): Select the preset station.4  Set the activation day and time.
    • “M” lights up when complete. 
    Radio Timer will not activate for the following cases.
    •  The unit is turned off.
    • 
    [OFF] is selected for [AM/SW1/SW2] in [SRC SELECT] after Radio Timer 
    for AM/SW1/SW2 is selected. ( 4)
    SSM
    SSM 01 – 06 / SSM 07 – 12 / SSM 13 – 18: Automatically presets up to 
    18 stations for FM. “SSM” stops flashing when the first 6 stations\
     are stored. 
    Select 
    SSM 07 – 12 / SSM 13 – 18 to store the following 12 stations. 
    IF BAND*AUTO: Increases the tuner selectivity to reduce interference noises from \
    adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to 
    interference noises from adjacent FM stations, but sound quality will no\
    t be 
    degraded and the stereo effect will remain.
    MONO*ON: Improves the FM reception, but the stereo effect will be lost. ;\
     OFF: Cancels.
    NEWS-STBY*ON: The unit will temporarily switch to News Programme if available. \
    ; OFF: Cancels.
    REGIONAL*ON: Switches to another station only in the specific region using the “\
    AF” 
    control. ; OFF: Cancels.
    AF SET*ON: Automatically searches for another station broadcasting the same 
    program in the same Radio Data System network with better reception 
    when the current reception is poor. ; 
    OFF: Cancels.
    * Only for FM source.
    EN_KD-X210[U]f.indd   8 EN_KD-X210[U]f.indd   8 10/30/2013   9:22:56 AM
    10/30/2013   9:22:56 AM 
    						
    							9
    ENGLISH   |
    Data Size:  B6L (182 mm x 128 mm)
    Book Size:  B6L (182 mm x 128 mm)
    Pandora® (for KD-X210) (Applicable for Australia or New Zealand models only)
    Preparation:
    Install the latest version of the Pandora application onto your device 
    (iPhone/ iPod touch), then create an account and log in to Pandora.
    • Select 
    [ON] for [PANDORA] in [SRC SELECT]. ( 4)
    Start listening
    1 
    Open the Pandora application on your device.2 Connect your device to the USB input terminal.
         The source changes to PANDORA and broadcast starts.
    *  Do not leave the cable inside the car when not using.
    To  Do this
    Pause or resume 
    playback  Press the volume knob (or press  on RM-RK52).
    Thumbs up or 
    thumbs down
     Press 2  / 1  (or press J / K on RM-RK52).
      •  If thumbs down is selected, the current track is  skipped.
    Skip a track
     Press T (or press I on RM-RK52).
    Create a new station
    1 
    Press MENU.2 Turn the volume knob to select [NEW STATION], then press the knob.3 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then 
    press the knob.
        A new station is created based on the current song or artist.
    Search for a registered station
    1 
    Press MENU.2 Turn the volume knob to make a selection, then press the knob.
      [BY DATE]: According to the registered date.
      [A-Z]: Alphabetical order.3 Turn the volume knob to the desired station, then press the knob.
    Bookmark a song or artist information
    1 
    Press and hold the volume knob.2 Turn the volume knob to select [THIS TRACK] or [THIS ARTIST], then 
    press the knob.
        “BOOKMARKED” appears and the information is stored to your device.\
        The bookmark is available on your Pandora account but not on this  unit.
    USB input terminal
    (Accessory of the iPod/iPhone)
    *
    EN_KD-X210[U]1.indd   9 EN_KD-X210[U]1.indd   9 14/10/2013   3:52:49 PM
    14/10/2013   3:52:49 PM 
    						
    							10
    Data Size:  B6L (182 mm x 128 mm)
    Book Size:  B6L (182 mm x 128 mm)
    AUDIO SETTINGS
    (For KD-X110)
    To Do this
    Select a preset 
    equalizer Press EQ repeatedly. (or) Press EQ, then turn the volume knob within 
    2 seconds.
        FLAT (default), HARD ROCK, JAZZ, POP, R&B,  TALK, USER1, USER2, VOCAL BOOST, BASS BOOST, 
    CLASSICAL, DANCE
    Store your 
    own sound 
    settings
    Default: 
    00
    1 Press and hold EQ.2 Turn the volume knob to select [EASY EQ], then press 
    the knob.
    3 Turn the volume knob to select [USER1] or [USER2], 
    then press the knob.
    4 Turn the volume knob to make a selection, then 
    press the knob.
      SUB.W  *
    : –08 to +08
        BASS LVL: –06 to +06
      MID LVL: –06 to +06
        TRE LVL: –06 to +06
    •  To return to the previous setting item, press G.
    •  To exit, press EQ.
    *  Displayed only when 
    [L/O MODE] is set to [SUB.W] ( 11) and [SUB.W] is set 
    to [ON]. ( 10)
    Other settings
    1 
    Press and hold MENU.2 Turn the volume knob to make a selection (see the following table), 
    then press the knob.
      Repeat step  2 until the desired item is selected.
    3 Press MENU to exit.
    To return to the previous setting item or hierarchy, press G.
    Default: XX
    EQ SETTING
    EQ PRESET
    FLAT / HARD ROCK / JAZZ / POP / R&B / TALK / USER1 / USER2 / VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE: Selects a preset 
    equalizer.
    EASY EQDefault: 001 USER1/ USER2: Select a preset name.2  Adjust your own sound settings. SUB.W  *1: –08 to +08/ BASS LVL: –06 to +06/ MID LVL: –06 to +06/ TRE LVL: –06 to +06
    PRO EQ
    1 USER1/ USER2: Select a preset name.2 BASS / MIDDLE / TREBLE: Select a sound tone.3  Adjust the sound elements of the selected sound tone. BASS Frequency: 60/ 80/ 100/ 200 Hz Default: (80 Hz)
       Level: –06 to +06  (00)
       Q: Q1.0/ Q1.25/ Q1.5/ Q2.0  (Q1.0) MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 kHz Default: (1.0 kHz)
       Level: –06 to +06  (00)
       Q: Q0.75/ Q1.0/ Q1.25  (Q1.25) TREBLE Frequency: 10.0/ 12.5/ 15.0/ 17.5 kHz Default: (10.0 kHz)
       Level: –06 to +06  (00)
       Q: Q FIX  (Q FIX)
    AUDIO
    BASS BOOST
      *2+01 / +02: Selects your preferred bass boost level. ; OFF: Cancels.
    LOUD01 / 02: Boosts low or high frequencies to produce a well-balanced sound 
    at low volume. ; OFF: Cancels.
    SUB.W LEVEL  *3–08 — +08 (00): Adjusts the subwoofer output level.
    SUB.W *4ON / OFF: Turns on or off the subwoofer output.
    SUB.W LPF *3 THROUGH: All signals are sent to the subwoofer. ; LOW 55Hz / MID 85Hz / HIGH 120Hz: Audio signals with frequencies lower than 
    55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer.
    EN_KD-X210[U]f.indd   10 EN_KD-X210[U]f.indd   10 10/30/2013   9:27:03 AM
    10/30/2013   9:27:03 AM 
    						
    All JVC manuals Comments (0)

    Related Manuals for JVC Rx110 Manual