JVC Projector LX-FH50 User Manual

  21
  Menu Functions
PICTURE menu
SubmenuFunctions and Descriptions
Picture Mode
Selects a preset picture mode to suit your operating environment and input 
signal picture type.
The preset picture modes are described as below:
• Bright: Maximizes the brightness of the projected image. This mode is 
suitable for environments where extra-high brightness is required, such 
as using the projector in well lit rooms.
• Living Room: With well-saturated color, fine-tuned sharpness and a 
higher brightness...

22 Menu Functions  
Tint
Adjusts the red and green co
lor tones of the picture. 
The higher the value, the more reddis h the picture becomes. The lower the 
value, the more greenish the picture becomes.
This function is only available when a Video or S-Video signal is selected and 
the system format is NTSC.
Sharpness
Makes the picture look sharper or softer. 
The higher the value, the sharper 
the picture becomes. The lower 
the value, the softer the picture 
becomes.
Color 
Temperature
The options...

  23
  Menu Functions
Advanced
• Black Level
Sets the picture grayscale to 0 IRE or 7.5 IRE. The grayscale video signal is 
measured in IRE units. In some areas which use NTSC TV standard, the 
grayscale is measured from 7.5 IRE (black) to 100 IRE (white); however, in 
other areas where PAL equipment or Japanese NTSC standards are used, the 
grayscale is measured from 0 IRE (black) to 100 IRE (white). We suggest you 
to check if the input source is with 0 IRE or with 7.5 IRE, and then make your...

24 Menu Functions  
DISPLAY menu
SubmenuFunctions and Descriptions
Screen Color
Enable this function to help correct the projected picture’s color when the 
projection surface is not white. You may choose a color similar to that of the 
projection surface from these options: Light Yellow, Pink, Light Green, Blue, 
or Blackboard.
Aspect Ratio
In the following illustrations, the black portions are inactive areas and the 
white portions are active areas.
• Auto
Scales a picture proportionally to fit the...

  25
  Menu Functions
SOURCE menu
Digital Zoom
Allows you to magnify the image and find the details on it:
1. Press ENTER to display the Zoom bar.
2. Press   repeatedly to magnify the projected image to your desired 
size.
3. To navigate the image, press ENTER to switch to the panning mode 
and use the directional arrows ( / / / ) to navigate it. The image 
can only be navigated after it is magnified. You can further magnify it 
while searching for details.
4. To reduce the image size, press ENTER to...

26 Menu Functions  
SYSTEM SETUP: Basic menu
HDMI Setting
• Auto: Sets the projector to detect the HDMI range of the input 
signal automatically.
• Full: Sets the HDMI color range as 0 - 255.
• Limited: Sets the HDMI color range as 15 - 235.
Audio Settings
• Mute
Select On to temporarily turn off the projectors internal speaker or the 
volume being output from the audio output jack. 
To restore the audio, select Off.
The function is accessible through the remote control.
• Vo l u m e
Adjusts the volume...

  27
  Menu Functions
SYSTEM SETUP: Advanced menu
Lamp Settings
• Lamp Mode
Select the projector lamp power from the following modes.
• Normal: Provides full lamp brightness.
• Economic: Reduces system noise and lamp power consumption 
by 30%.
If the Economic mode is selected, the light output will be reduced and 
result in darker projected pictures. See Setting Lamp Mode
 for details.
• Reset Lamp Timer
Activate this function only after a new lamp is installed. When you select 
Reset, a Reset...

28 Menu Functions  
Presentation Timer
Presentation timer can indicate the presentation time on the screen to 
help you achieve better time management when giving presentations.
• Preset Time
Sets the time period. If the timer is already on, the timer will restart 
whenever the Preset Time is reset.
• Timer Display
Allows you to decide if you want the timer to show up on the screen for 
one of the following time periods:
• Always: Displays the timer on screen throughout the presentation 
time.
• 1 min/2...

  29
  Menu Functions
Security Settings
For security purposes and to prevent unauthorized use, you may set up 
password security for the projector. This limits use of the projector to only 
those who know the correct password. If you enter an incorrect password 
5 times in succession, the projector will automatically shut down in a 
short time. 
You will be inconvenienced if you enable this function yet forget the 
password somehow. Do make a note of your password, and keep the 
note in a safe place for...

30 Menu Functions  
INFORMATION menu
Some information is given only when certain input sources are in use. 
LAN Settings
• Standby LAN
Allows the projector to provide the network function when it is in standby 
mode. See Controlling the projector remotely
 for details on the network 
function.
•  PJLink Certification, Change PJLink Password
See Utilizing the PJLink™ password function for details.
• AMX Device Discovery
Allows the projector to be detected by AMX controller.
•  DHCP, Projector IP Address,...