JVC Projector DLA-X900R User Manual

Aspect
The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that
has been input. Æ “Adjusting the Screen Size (Aspect)”  （p. 31）Progressive
For converting the interpolation setting of the interlaced signals. Setting
Description
Auto Performs interpolation by automatically detecting whether the interlaced signals
are converted from 24p video images, such as those in film movies, or interlaced
signals of video materials.
Off Interpolates video...

Installation
Lens Control
Focus / Zoom / Shift For adjusting the lens according to the projection position Æ “Adjusting the Lens According to the Projection Position”  （p. 27）
Image Pattern Setting
Description
On Displays the lens adjustment pattern.
Off Displays external signals, and does not display the lens adjustment pattern.Lock
Setting
Description
On Locks the lens to prevent any erroneous operation on the adjustments.
0 Operation of the lens control feature is disabled when “On” is selected.
Off...

Pixel Adjust
Adjust
For setting the adjustment feature to On (Memory 1 or Memory 2) or Off. * You can save the settings separately when an anamorphic lens is used and when you are using the projector with a screen.
Adjust Area Setting
Description
Whole Adjusts the entire image.
Zone Enables fine adjustment of each zone by dividing the screen into 11 vertical x 11
horizontal zones.Adjust Color
For selecting the color to adjust (“Red” or “Blue”).
Adjust Pattern Color
For setting the adjustment pattern...

Installation Style
For setting to “Front”, “Ceiling Mount (F)”, “Rear”, or “Ceiling Mount (R)” according to the installation status of the
projector. 0 “Front” or “Ceiling Mount (F)” is set when projector is installed in the front with respect to the screen.
0 “Rear” or “Ceiling Mount (R)” is set when projector is installed in the rear with respect to the screen. Keystone
For correcting any keystone distortion that occurs when the projector is installed at an angle with respect to the screen. 0 Vertical...

Whole Adjust (Pixel) Operation Procedure
For making general adjustments to slight color fringing in the horizontal/vertical directions of the video image.
A Set “Adjust Area” to “Whole”
B Select “Adjust Color” and “Adjust Pattern Color”
C Select “Adjust(Pixel)”, and press the [OK] button
0 The selected adjustment pattern and Adjustment (Pixel) window are displayed.
. D
Press the [OK] button to enter the Adjustment mode
E Use the [JKH  I
] keys to move and adjust the pixels in the vertical and horizontal...

Whole Adjust (Fine) Operation Procedure
For making general adjustments  on 
the misalignment of the entire screen using “Adjust(Pixel)”, followed by making fine
adjustments.
A Set “Adjust Area” to “Whole”
B Select “Adjust Color” and “Adjust Pattern Color”
C Select Adjust(Fine), and press the [OK] button
0 The selected adjustment pattern and Fine window are displayed.
0 The adjustable range may be smaller depending on the pixels being adjusted on the entire screen.
. D
Press the [OK] button to enter the...

Zone Adjust Operation Procedure
For fine-tuning misalignments on a part of the screen after adjusting the overall screen misalignment using
“Adjust(Pixel)” and “Adjust(Fine)”. 0 The screen can be divided vertically and horizontally into 10 sections for partial adjustments to be made.
A Set “Adjust Area” to “Zone”
B Select “Adjust Color” and “Adjust Pattern Color”
C Select Adjust(Fine), and press the [OK] button
0 The selected adjustment pattern and Zone Adjustment window are displayed.
0 The adjustable...

Display Setup
Back Color
For setting the color of the background to “Blue” or “Black” when there is no signal input. Menu Position
For setting the display position of the menu. Signal Display
Setting
Description
On Shows the input terminal for 5 seconds when input is switched.
Off Not displayed.Logo
Setting
Description
On Displays the “D-ILA” logo for 5 seconds during startup.
Off Not displayed.Language
For setting the display language to “ 日本語”, “English”, “Deutsch”, “Español”, “Italiano”, “Français”,...

Function
Trigger
For setting whether to supply a 12 V output to devices such as an external screen equipped with a trigger function. Setting
Description
Off No output.
On (Power) Outputs control signals (12 V) from the trigger terminal when the power is turned
on.
0 After the power is turned off, output stops when the unit shifts to the Standby
mode after cooling is complete.
0 You can also output signals in the Standby mode by pressing the [OK] button.
On (Anamo) Outputs control signals when the...

Glossary of Network Terminology
DHCP : Abbreviation for Dynamic 
Host Configuration Protocol. This is a protocol for the network
to assign an IP address automatically to the connected device.
IP Address : Numeric characters for identifying the device that is connected to the network.
Subnet Mask : Numeric characters that define the bit count used for the network address that is a
segment of the IP address.
Default Gateway : Server for communicating beyond the network that is divided by the subnet mask....