JVC Projector DLA-SH7NL User Manual
Have a look at the manual JVC Projector DLA-SH7NL User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41
(6) Option Menu
This menu is used for specifying settings for the method of screen display, lamp brightness and others.
\b indicates the factory default.
Main
Image
Setting
Convergence
Lens
Option
Logout
host PJ-1
user: root
Flip
ONOFF
Back Color
BlueBlack
Lamp Power Horz.
ONOFFVe r t .
Test Pattern
SETOFF
OFF
HighLow
Message Display
ONOFF
Item Setting Value Description
Flip Horz.
Vert. ON
Q OFF
ON
Q OFF For specifying settings if images are
vertically or horizontally flipped
when they are projected from the opp osite side of the screen, or when
mirrors are used for projection.
ON : Flips image horizontally.
OFF : Do not flip image horizontally.
ON : Flips image vertically.
OFF : Do not flip image vertically.
Lamp Power Q High
Low For switching the brightness of the lamp between Low and High.
Back Color Q Blue
Black For specifying the background color during message display or when
projection fails, such as when there is no input signal.
Blue : Sets the screen to blue color.
Black : Sets the screen to black color.
Message
Display ON
Q OFF For specifying whether to display the message.
ON : Displays message.
OFF : Do not display the test pattern.
CAUTION:
●
When AOFF B is set, the ANo Input B, AOut of Range B and ALamp
Time Over B messages will not be displayed on the screen.
Test Pattern ^For projecting the test pattern.
NOTE:
●Same as ATest Pattern B in the Convergence Menu. ( APage 39)
43 After installation and connection are complete, perform the necessary adjustment and setting. Operate the menus using the computer’s browser to make adjustments and configure settings. Administrator Settings Menu Structure For details on page menu (1) to (6), refer to AUser Settings Menu B ( A Page 33 to 41). Administrator Settings Menu Page Menu Name Page Display Item Simplified Description of Item (1) Main Power Warning Status Lamp Mode Lamp Information Signal Status Temperature Hide Power ON/OFF operation Error code display Illumination mode setting Lamp information display Input signal information display Projector’s interior temperature display Mute operation (2) Image Brightness Contrast Gamma Hide Brightness adjustment Contrast adjustment Gamma setting Mute operation (3) Setting Input Level Display Mode Input level setting Display method setting (4) Convergence Red Blue Test Pattern Pixel position adjustment Pixel position adjustment Test pattern setting (5) Lens Zoom Focus Shift Test Pattern Zoom adjustment Focus adjustment Image position adjustment Test pattern setting (6) Option Flip Lamp Power Back Color Message Display Test Pattern Image inversion setting Lamp power setting Background color setting Message display setting Test pattern setting (7) Admin.Network Host Name Setting IP Address Setting User Login Password Change Admin. Login Password Change Host name setting IP address setting User login setting Administrator login setting (8) Admin.E-mail E-Mail Setting Test Mail E-mail setting Test e-mail setting (9) Admin.Option Color Depth Frame Lock Mecha. Shutter High Altitude Lamp Time Reset Color balance setting Frame synchronization setting Mechanical shutter setting High altitude mode setting Resetting lamp time (10) Admin.Signal Force Signal Display Mode Signal Status EDID Input/output signal setting Display method setting Input signal information display EDID information rewrite
44
Operation and Settings
(7) Admin.Network Menu
For configuring the network settings.
\bindicates the factory default.
Administrator Settings
Menu (Cont’d)
Main
Image
Setting
Convergence
Lens
Option
Admin.Option
Admin.Signal
Admin.Network
Admin.Mail
Logout
host PJ-1
user: advanced
Host Name Setting
SET
Host NamePJ
ZZZZZZ
IP Address Setting
SET
DHCP Client DHCP
IP Address192.168.1.100
User Login Name/Password Change
SET
InitializeUser Name root
New Password
Confirm
New Password
Admin. Login Password Change
SET
User Name advanced
New Password
Confirm
New Password
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Mac Address 01:23:45:67:89:ABSTATIC IP
Item Setting Value Description
Host Name Setting Host Name ^
(Default Value:
PJ ZZZZZZ )For specifying the host name.
NOTE:
●
You can change it to a random name. You can input up to 8
characters using single-byte alphanumeric characters and “ ”.
● “ZZZZZZ ” of the default value displays the lower 3 bytes of the
MAC address of this projector.
IP Address Setting DHCP Client
IP Address
Subnet Mask
Default Gateway
Mac Address DHCP
Q STATIC IP
(Default Value:
192.168.0.2)
(Default Value:
255.255.255.0)
(Default Value:
192.168.0.254) ^ For configuring the network settings.
DHCP : Select this to acquire the IP address from the
DHCP server automatically.
STATIC IP : Select this to configure the IP address manually.
IP Address : Specify the IP address.
Subnet Mask : Specify the subnet mask.
Default Gateway : Specify the default gateway.
Mac Address : Displays the MAC address. (Cannot be specified)
45
Item Setting Value Description
User Login Name/
Password Change User Name
New Password
Confirm New
Password
Initialize root
^
^
^For changing the login name and password.
User Name : For changing the login name.
New Password : For changing the login password.
Confirm New Password : Re-enter the new password. (For
confirmation)
Initialize : For resetting the username/password.
NOTE:
● You can change it to a random name. You can input up to 8
characters using single-byte alphanumeric characters and “ ”.
● If you have forgotten the password, please consult any nearby JVC
servicing center.
Admin. Login Password
Change User Name
New Password
Confirm New
Password
Initialize advanced
^
^
^For changing the administrator’s password.
User Name : Cannot be changed. (fixed)
New Password : For changing the login password.
Confirm New Password : Re-enter the new password. (For
confirmation)
Initialize : For resetting the password.
NOTE:
● You can change it to a random name. You can input up to 8
characters using single-byte alphanumeric characters and “ ”.
● If you have forgotten the password, please consult your authorized
dealer.
46
Operation and Settings
(8) Admin.E-mail Menu
This menu is for configuring the mail settings,
which sends out an error message to the computer of the preset address when an abnormality occurs within this projector.
Error message sent from this projector
(Example) When error occurs at the DD-RB board
Sender
Mail title
Message
NOTE:
●Refer to the code in the AWarning Status B for the error code. ( APage 55)
Administrator Settings
Menu (Cont’d)
ZZZZZZ (setting value for AE-Mail Sender B)
4KPJU2 report mail
Error Code
System Time
Lamp1 Time
Lamp2 Time
Lamp Temp.
Inside Temp.
Outside Temp. 32 “Trouble with DD-RB circuit board.”
106 h 57 m
41h 59 m
41h 31 m
42 deg.C
40 deg.C
24 deg.C
Logout
host PJ-1
user: advanced
E-Mail Setting
Tset Mail
SET
SEND
E-Mail
E-Mail Sender
SMTP Server Address E-Mail Auth.
Auth. Type
Auth. User Account Auth. Password
Port No.
user@localhost
E-Mail Addressuser@localhost
1.1.1.1
ON OFF
ON OFF
LOGINCRAM-MD5PLAN
46558725
Main
Image
Setting
Convergence
Lens
Option
Admin.Network
Admin.Option
Admin.Signal
Admin.E-Mail
47
\b indicates the factory default.
Item Setting Value Description
E-Mail Setting
E-Mail ON
Q OFF For configuring the e-mail feature.
ON : Use the mail feature.
OFF : Do not use the mail feature.
E-Mail Sender ^
(Default Value: lower 3
bytes of the MAC address) For specifying the destination e-mail address of this
projector.
E-Mail Address ^
(Default Value:
user@localhost) For specifying the destination e-mail address.
NOTE:
●
Specify an address up to a maximum of 64 characters.
● Make use of single-byte alphanumeric characters and
A-B A .B A _ B A @ B.
SMTP Server
Address ^
(Default Value: 1.1.1.1) For specifying the address of the outgoing mail server
(SMTP).
NOTE:
●
Specify an address up to a maximum of 15 characters.
●Make use of numbers and A.B .
E-Mail Auth. ON
Q OFF ON : Enable the e-mail authentication feature.
OFF : Disable the e-mail
authentication feature.
Auth. Type Q PLAIN
LOGIN
CRAM-MD5 For configuring the e-mail authentication type.
PLAIN : Set e-mail authentication to APLAIN B.
LOGIN : Set e-mail authentication to ALOGIN B.
CRAM-MD5 : Set e-mail authentication to ACRAM-
MD5 B.
Auth. User
Account ^
For configuring the account name during e-mail
authentication.
NOTE:
●Specify an address up to a maximum of 31 characters.
●Make use of single-byte alphanumeric characters and A-B.
Auth. Password ^ For configuring the password during e-mail authentication.
NOTE:
●Specify an address up to a maximum of 31 characters.
●Make use of single-byte alphanumeric characters and A-B.
Port No. Q 25
465
587 For configuring the SMTP server port number when using
the e-mail authentication feature.
Set ^ The details of the configuration will be saved.
Test Mail ^ When the ASEND B button is clicked, the test mail with the
contents configured in the E-Mail Setting will be sent.
48 Operation and Settings (9) Admin.Option Menu This menu is used for specifying settings including image and option, and for resetting the lamp. \b indicates the factory default. Administrator Settings Menu (Cont’d) Logout host PJ-1 user: advanced Color Depth 8bit12bit Mech. Shutter ON Installation Style ABC OFF Lamp Time Reset Reset Frame Lock ONOFF High Altitude ONOFF Main Image Setting Convergence Lens Option Admin.Network Lamp111h1m ResetLamp212h5m Admin.Option Admin.Signal Admin.E-Mail Item Setting Value Description Color Depth Q 8bit 12bit For configuring the color balance. Frame Lock Q ON OFF For configuring the frame synchronization of each DVI input. Mech. Shutter ON Q OFF For configuring to ON/OFF the Mech. Shutter (model number: PK- VS4MSG, optional, sold separately). Click ON to operate the Mecha Shutter. High Altitude ON Q OFF Configure to ON when using at high altitude (above 1,500 m). Installation Style A Q B C For configuring the installation method (orientaion mode) of the projector. A : Orientation mode A (upward installation) B : Orientation mode B (horizont al installation/normal mode) C : Orientation mode C (downward installation) Lamp Time Reset Lamp1 Lamp2 ^ For resetting the lamp time of Lamp 1 and 2.
49
(10) Admin.Signal Menu
This menu is for configuring settings such as display format, and for rewriting EDID.
\b indicates the factory default.
Logout
host PJ-1
user: advanced
Display Mode
11
3
3
12
4
Main
Image
Setting
Convergence
Lens
Option
Admin.Network
Admin.Option
Admin.Signal
Admin.E-Mail
EDID
SETBrowse
Force Signal
SETOFF
OFF
DVI Rate(Hz) Pixel H Pixel V Link
1 60.00 2048 2400 Dual
2
3 60.00 2048 2400 Dual
4 Signal Status
Single Double Cross
Item Setting Value Description
Force Signal Q OFF
4096 2400, None,
Dual
4096 2400, None,
Single
2048 2400,
2Stripe, Dual
2048 2400,
2Stripe, Single
2048 1200,
Cross, Dual
2048 1200,
Cross, Single
1024 2400,
4Stripe, Dual
1024 2400,
4Stripe, Single For forcibly configuring the output signal. Make use of this setting
when there is no display due to configuration changes at the input
source.
NOTE:
●
Some portions of the image may not be displayed and the image
may become noisy.
OFF : Turns off the display by force.
4096 2400, None, Dual
: Displays a normal screen using dual link.
4096 2400, None, Single
: Displays a normal screen using single link.
2048 2400, 2Stripe, Dual
: Displays a 2 stripes screen using dual link.
2048 2400, 2Stripe, Single
: Displays a 2 stripes scr een using single link.
2048 1200, Cross, Dual
: Displays a cross screen using dual link.
2048 1200, Cross, Single
: Displays a cross screen using single link.
1024 2400, 4Stripe, Dual
: Displays a 4 stripes screen using dual link.
1024 2400, 4Stripe, Single
: Displays a 4 stripes scr een using single link.
50
Operation and Settings
(10) Admin.Signal Menu (Cont’d)
\b indicates the factory default.
Administrator Settings
Menu (Cont’d)
Item Setting Value Description
Signal Status DVI
Rate(Hz)
Pixel H
Pixel V
Link ^
^
^
^
^Displays information on the input signals. Same as
ASignal Status B in the
User Menu.
DVI : Displays the DVI input terminal number.
Rate(Hz) : Displays the vertical frequency.
Pixel H : Displays the horizontal resolution.
Pixel V : Displays the vertical resolution.
Link : Displays the link status of the DVI terminal.
NOTE:
●This item is not displayed when there is no signal input.
● The text color of Rate (vertical fr equency) turns red in the case of
interlaced signal. And the text turns white in the case of progressive
signal.
Display Mode Q Signal
Double
Cross For specifying the display mode of the projection screen. Same
configuration as
ADisplay Mode B in the User Menu.
Signal : Displays input signals on a single screen.
Double : Displays two different input signals on two screens. The left screen displays images of the DVI1 terminal, and the
right screen displays images of the DVI3 terminal.
Cross : Displays four different input signals on four screens.
The top left screen displays images of the DVI1 terminal,
the top right screen displays images of the DVI2
terminal, the bottom left screen displays images of the
DVI3 terminal, while the bottom right screen displays
images of the DVI4 terminal.
EDID ^For rewriting EDID.
Click the ABrowse B button and select an EDID file.
Click the ASET B button to start writing.
Write AOK B will be displayed for each channel. “NG (number)” is displayed
when writing fails.
Error Code
1: System error
7: Unable to execute due to power off
8: Unable to rewrite due to DVI cable connection
CAUTION:
● Do not turn off the power during rewrite.
● The EDID file capacity is within 256 byte.
● Rewriting to individual channel is not available.
● It is not possible to move on to other pages during rewrite.
NOTE:
●EDID: Extended Display Information Data
A data to describe the specifications (resolution, model number, etc.) of
the projector. The compatible transmitting device will output the
optimum video signal based on this data.