JVC Projector DLA-RS600 User Manual

							Setting the Color Profile
By setting the “Color Profile” (color space information) according to the “Picture Mode”, you can fine-tune the image
quality according to the movie you are viewing. 1
Configure “Picture Mode” (P. 30), then select “Picture Adjust”"“Color Profile” in the
menu 0 The  selectable “Color Profile” settings vary according to the “Picture Mode” and also whether the signal is 2D
or 3D. List of “Color Profile” for “Picture Mode”
 9Picture Mode 2D Signal Input 3D Signal Input
DescriptionCinema
Cinema —
Color space suitable for all movies.
Standard Standard Color space of the HDTV standard. *1 — 3D Cinema Color space suitable for all 3D movies.Animation Animation
—
Color space that is suitable for animated works.
Standard Standard Color space of the HDTV standard. *1 — 3D Animation Color space suitable for 3D animation works.Natural
Video —
Color space that is suitable for drama footage, etc.
Standard Standard Color space of the HDTV standard. *1 — 3D Video Color space suitable for 3D broadcasts.User 1 to User 6 Standard When “Picture Mode” is set to any of the settings from “User 1” to “User
6”, you can select one of the “Color Profile” shown on the left.
0 See above for the description of the respective “Color Profile”.
Cinema
Video
Natural
3D Cinema
3D Video
3D Animation
x.v.Color*2*3
Color space that is close to that of the x.v.Color standard.
Off Disables color space adjustment.
Custom 1 to Custom 6 Saves the auto calibration values.
0 To perform auto calibration, you need to get ready a commercially
available optical sensor and the projector calibration software
program. For more details, please refer to our website. *1 HDTV is the abbreviation for High Definition Television.
*2

To view videos that support the x.v.Color format, select a user setting (“User 1” to “User 6”) in “Picture Mode”,
and set “Color Profile” to “x.v.Color”.
*3 x.v.Color is a wide color space standard for used in videos; it includes wider color gamut than the HDTV standard. 31
Adjust/Set 
						

							List of “Color Profile” for “Picture Mode”
 7 8Picture Mode 2D Signal Input 3D Signal Input
DescriptionFilm
Film 1 —
Color space that is close to the characteristics of Eastman Kodak Company
movie films.
Film 2 —
Color space that is close to the characteristics of FUJIFILM Corporation movie
films.
Film 3 —
Color space suitable for digitally remastered piece of art based on a Technicolor
film.
— 3D Film*1 Color space suitable for 3D movies recorded in film.Cinema Cinema 1 3D Cinema Original JVC cinema-specific color gamut that achieves a balance between
increased brightness and color vividness.
Cinema 2 —
Color space that is close to that of the DCI standard.
Standard Standard Color space of the HDTV standard. *2 — 3D Cinema Color space suitable for all 3D movies.Animation Anime 1 3D Animation Color space that is suitable for CG animation works. Ideal for animated works
with bright colors.
Anime 2 —
Color space that is suitable for cel animation works. Ideal for animated works with
light colors.
Standard Standard Color space of the HDTV standard. *2 — 3D Animation Color space suitable for 3D animation works.Natural Video 3D Video Color space that is suitable for drama footage, etc. making use of the increased
brightness.
Standard Standard Color space of the HDTV standard. *2
Reference —
Color space that faithfully reproduces the video as it is.
— 3D Video Color space suitable for 3D video materials.
THX THX*3 3D THX*3 Color space of the THX standard.User 1 to User 6 Standard When “Picture Mode” is set to any of the settings from “User 1” to “User 6”, you
can select one of the “Color Profile” shown on the left.
0 See above for the description of the respective “Color Profile”.
Cinema 1
Cinema 2
Anime 1
Anime 2
Video
Reference
3D Cinema
3D Video
3D Animation
x.v.Color*4*5
Color space of the x.v.Color standard.
Off Disables color space adjustment.
Custom 1 to Custom 6 Saves the auto calibration values.
0 To perform auto calibration, you need to get ready a commercially available
optical sensor and the projector calibration software program. For more
details, please refer to our website. *1 The value is fixed during 3D signal input, and selection cannot be made.
*2
HDTV is the abbreviation for High Definition Television.
*3 Color Profile is fixed when “THX” is selected as the “Picture Mode”.
*4 To view videos that support the x.v.Color format, select a user setting (“User 1” to “User 6”) in “Picture Mode”, and set “Color Profile” to “x.v.Color”.
*5 x.v.Color is a wide color space standard for used in videos; it includes wider color gamut than the HDTV standard. 32
Adjust/Set 
						

							Adjusting to the Preferred Color (Color Management)
Based on the setting of the selected “Color Profile”, you can adjust each of the following colors according to your
preference: Red, Yellow, Green, Cyan, Blue, and Magenta. 1
Press the [ADVANCED MENU] button to display the “Color Profile” menu 2
Set “Color Management” to “On”, and press the [OK]
button 0 You  can also perform setting from “Picture Adjust”"“Color Profile” "“Color
Management” in the menu. 3
Adjust to the preferred color.
A Select “Color Selection”, and press the  H I keys to
select the color to adjust
0 For color adjustment, select the color from the
following: 

“Red”, “Yellow”, “Green”, “Cyan”, “Blue”,
“Magenta”.
B Adjust the selected color Item
Setting RangeDescription
Axis Position -30 to 30 Fine-tune the position of the central axis of
the selected color.
Hue -30 to 30 Adjusts the hue (color tone).
Saturation -30 to 30 Adjusts the color saturation (vividness).
-30 (dull) to +30 (vivid)
Brightness -30 to 30 Adjusts the brightness.
-30 (dark) to +30
(bright)0
Selecting “Reset” resets all the adjustment data.
0 Pressing 
 the [HIDE] button on the remote control
enables you to check the image before
adjustment. 4
Press the [MENU] button to exit 33
Adjust/Set>
MENUBACK
0
000
Back
Operate
Select
Exit
Red On
Film 1
Before
Brightness Saturation
Hue
Axis Position
Color Selection
Color Management Color Profile
Picture Adjust
Color Profile
Reset
Off
On >
MENUBACK
0
000
A
B
Magenta
Blue
Cyan
Green Yellow
Red
Clockwise rotation: -
Counterclockwise rotation: +
Axis Position (Image)Adjustable range when 
Red is selected: ± 30° 
with Red as the center
Back
Operate
Select
Exit
Red On
Film 1
BeforeReset
Brightness Saturation Hue Axis Position Color Selection Color Management
Color Profile
Picture AdjustColor Profile  
						

							Adjusting Movies for Increased
Expressiveness (Multiple Pixel Control)
The new image-processing algorithm developed by JVC
helps to create a natural impression that is sharper at
areas in focus, and softer at areas that are not in focus,
enabling you to enjoy highly expressive 4K images with
a greater sense of depth. 1
Press the [MPC] button to display the
adjustment menu 0 You can also perform setting from “Picture
Adjust”"“MPC Level” in the menu.
. 2
Make adjustments according to your
preference  based on the setting of the
selected “Picture Mode” * The factory setting varies with the “Picture Mode”. Item Setting
Description
4K e-shift On (4K)/Off (2K)Switches the display
resolution.
Original
Resolution Auto/4K/
1080pFor selecting a resolution for
the content you are viewing.
Enhance* 0 to 10 Enhances the sharpness of the image.
Dynamic
Contrast 0 to 10 Enhances the contrast of the
image.
Smoothing 0 to 10 Enhances the blurriness of the image for a softer effect.
NR 0 to 10 For reducing the noise of the video image.* In the case of 4K 50/60p and other input signals, the
respective setting values are saved. 0
In 
 the default “Original Resolution” setting (“Auto”), the
resolution is set automatically.
0 By increasing the setting range, you can expect
enhanced effects.
0 Images are displayed in the original resolution (2K)
when “4K e-shift” is set to “Off”.
0 “Original 
 Resolution”, “Enhance”, “Dynamic Contrast”,
and “NR” can be adjusted even when “4K e-shift” is set
to “Off”.
0 “4K e-shift” is fixed at “On” during 4K signal input.
0 “Original Resolution” is fixed at “Auto” during 4K
50/60p 

signal input. “Dynamic Contrast”, “Smoothing”
and “NR” are grayed out.
0 “4K e-shift” is fixed at “Off” during 3D signal input. 3
Press the [MENU] button to exit Toggling between the States before
and during Adjustment
Pressing 

the [HIDE] button on the remote control enables
you to toggle between the states before adjustment and
during adjustment. 34
Adjust/Set>>
MENUBACK
000
0
PICTURE MODE
FILM CINEMA ANIME.
NATURALTHX USERADVANCED MENU
3D
FORMATPIC.
ADJ.COLOR TEMP.
GAMMAP. A N A LY Z E RMPC
Back
Operate
Select
Exit Auto
On
Before Reset
NR Smoothing
Dynamic ContrastEnhance Original Resolution
4K e-shift MPC Level
Picture Adjust   
						

							About the analysis screen
Pressing the [P.ANALYZER] button on the remote control displays the analysis screen. The operation varies with the
state of the OSD.
*
The analysis screen is not displayed during 4K 50/60p signal input. 1
Press the [P.ANALYZER] button
The frequency components of the input image are displayed.
. 0
The frequency components are distinguished using different colors.
0 When setting the “Original Resolution” manually, select “4K” if high-frequency components constitute the majority,
and a lower resolution if there are more low-frequency components.
. 2
Make adjustments while looking at the analysis screen
A Press the [MPC] button to display the adjustment menu
You can also perform setting from “Picture Adjust” "“MPC Level” in the menu.
B Make adjustments according to your preference based on the setting of the selected “Picture Mode”*
0 With “Enhance” selected, pressing the [P.ANALYZER] button displays the analysis screen and the area
where the “Enhance” effect is applied appears in “cyan” color.
0 With 
 “Dynamic Contrast” selected, pressing the [P.ANALYZER] button displays the analysis screen and the
area where the “Dynamic Contrast” effect is applied appears in “yellow” color.
0 With “Smoothing” and “NR” selected, pressing the [P.ANALYZER] button displays the analysis screen and
the area where the “Smoothing” and “NR” effects are applied appears in “magenta” color.
* You can make adjustments with the analysis screen displayed. Increasing the value enhances the effect and the color displayed is darker. 3
Press the [P.ANALYZER] to exit the analysis screen 35
Adjust/Set  LowHigh
Red Yellow Green Cyan
Blue
Frequency Purple  
						

							Fine-tuning the Image Quality
Adjusting the Output Value of the Projected Image (Gamma)
You can adjust the output value of the projected image with respect to the video signal input.
Example of gamma adjustment
The overall image appear brighter with respect to the original image, making the dark areas more visible.
.Increases the contrast with respect to the original image, creating a greater sense of depth.
. 1
Press the [GAMMA] button
0 Pressing the [GAMMA] button each time switches the setting in sequence.
0 You can also perform setting from “Picture Adjust”"“Gamma” in the menu.
*1 The setting value varies with the model in use, as well as the “Picture Mode”.
*2
If HDR (high dynamic range) signal is detected, the setting value may
automatically switch to “D”.
If the setting value does not switch automatically when viewing HDR
contents, try to set to “D” manually.
If the image appears dark after switching to “D”, it is recommended to
adjust the image according to the procedures in “Procedures for adjusting
the image when gamma is set to “D””P. 39. Gamma Settings for Different “Color Profile”
 9Color Profile Selectable Settings
DescriptionStandard
Cinema
Animation
Video
3D Cinema
3D Video
3D Animation
Off
Normal
Recommended setting for normal viewing.
A Places more emphasis on the gradation compared to the Normal
setting.
B Places more emphasis on the contrast compared to the Normal
setting.
C Places more emphasis on the brightness compared to the Normal
setting.
D Gamma suitable for viewing HDR (High Dynamic Range) content.
Custom 1 to Custom 3 Fine-tunes the gamma setting according to the user’s preference.
x.v.Color Normal* Recommended setting for normal viewing.* When “Color Profile” is set to “x.v.Color”, the setting is fixed at “Normal”.
36
Adjust/Set0
2550
255
The photos are for illustrative purposes only.
Input Value
Output Value
A
B
AB 0
2550
255
AB
AB
The photos are for illustrative purposes only.
Input Value
Output Value PICTURE MODE
FILM CINEMA ANIME.
NATURALTHX USERADVANCED MENU
3D
FORMATPIC.
ADJ.COLOR TEMP.
GAMMAP.ANALYZERMPCGAMMA  
						

							Gamma Settings for Different “Color Profile”
 7 8Color Profile
Selectable Settings DescriptionFilm 1
Film 1 Image is close to the characteristics of Eastman Kodak
Company movie films.
Film 2 Places more emphasis on the gradation compared to the
“Film 1” setting.
Custom 1 to Custom 3 Fine-tunes the gamma setting according to the user’s
preference.Film 2
Film 1 Places more emphasis on the contrast compared to the “Film
2” setting.
Film 2 Image is close to the characteristics of FUJIFILM Corporation
movie films.
Custom 1 to Custom 3 Fine-tunes the gamma setting according to the user’s
preference.Film 3
Film 1 Places emphasis on the contrast.
Film 2 Places emphasis on the gradation.
Custom 1 to Custom 3 Fine-tunes the gamma setting according to the user’s
preference.3D Film
Film 1 Places emphasis on the contrast.
Film 2 Places emphasis on the gradation.
Custom 1 to Custom 3 Fine-tunes the gamma setting according to the user’s
preference.Standard
Cinema 1/Cinema 2
Anime 1/Anime 2
Video
Reference
3D Cinema
3D Video
3D Animation
Off
Normal
Recommended setting for normal viewing.
A Places more emphasis on the gradation compared to the
Normal setting.
B Places more emphasis on the contrast compared to the
Normal setting.
C Places more emphasis on the brightness compared to the
Normal setting.
D Gamma suitable for viewing HDR (High Dynamic Range)
content.
Custom 1 to Custom 3 Fine-tunes the gamma setting according to the user’s
preference.
x.v.Color Normal*1 Recommended setting for normal viewing.
THX
3D THX THX*2
Video of the THX standard.*1 When “Color Profile” is set to “x.v.Color”, the setting is fixed at “Normal”.
*2
When “Color Profile” is set to “THX”/“3D THX”, the setting is fixed at “THX”. Fine-tuning to the Preferred Gamma Setting
You can perform fine adjustments based on the selected gamma adjustment setting. 1
Press the [ADVANCED MENU] button to display the gamma menu
0 You can also perform setting from “Picture Adjust” "“Gamma” in the menu. 37
Adjust/Set>
MENUBACK
000
Back
Operate
Select
Exit White
2.2
Custom 1
Reset
Bright Level Dark Level Picture Tone
Color Selection Correction Value Gamma
Picture AdjustGamma  
						

							2
Adjust to the preferred setting Item
Description Setting
Color Selection Select “Color Selection”, and select the color to adjust White/Red/Green/Blue
Picture Tone Adjusts the overall brightness automatically for a well-balanced result without compromising the gradation of the image. -16 (darkens image for an
underexposed effect) to +16
(brightens 
image for an overexposed
effect)
Dark Level Adjusts the dark areas of the input image. (Each of White/Red/ Green/Blue can be adjusted.)
0 To do so, use the  H I keys to move the cursor. -7 (darkens the shadows) to +7
(brightens the shadows)
Bright Level Adjusts the bright areas of the input image. (Each of White/Red/ Green/Blue can be adjusted.)
0 To do so, use the  H I keys to move the cursor. -7 (darkens the highlights) to +7
(brightens the highlights)* Adjustment cannot be made when “Color Profile” is set to “x.v.Color”.
Selecting the Default Value for Making Adjustments
0 When one of “Custom 1” to “Custom 3” is selected in “Gamma”, you can select a “Correction Value”.
0 Select “Correction Value”, and press the  H I keys to select a correction value (setting value) as a base value for
adjustment.
0 For details on the correction value (setting value), please refer to 
 P. 36 and P. 37.
9
Normal, A, B, C, D, 1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, Import
7 8
When “Picture Mode” is set to “Film”:
Film 1, Film 2, Import
When “Picture Mode” is set to a value other than “Film”:
Normal, A, B, C, D, 1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, Import 0 The smaller the value, the brighter the dark areas of the image will become. At the same time, the bright areas will
appear blown out.
0 Selecting “Import” enables you to select the gamma data created externally. The factory setting for “Import” is the
same as the “Normal” setting.
0 You can use the projector calibration software to customize the gamma data adjustment, and import the created
gamma data.
For more details, please refer to our website.
http://www3.jvckenwood.com/english/download/index.html About gamma adjustment
0When the gamma curve is a straight line:
The brightness and contrast of the video input will be
the same as that of the video output.
0 Area for which the gamma curve is above the straight
line (A):
Video output appears brighter than the input.
0 Area for which the gamma curve is below the straight
line (B):
Video output appears darker than the input.
0 Area for which the slope of the gamma curve is steep
(midtone) (C):
The grayscale range of the video output becomes
wider, and the contrast increases (D"D’).  
38
Adjust/Set  C
B A
D
0 255
0
255
D”
Gamma Curve
Input Value
Output Value
Dark Dark
Bright
Bright  
						

							Procedures for adjusting the image when gamma is set to “D”
If 
the image appears dark when gamma is set to “D”, it is recommended to adjust the image according to the following
procedures.
A While checking the overall image, adjust the setting value of “Picture Tone” in the + direction.
B Focus on the bright area of the image and adjust the setting value of “Bright Level” in the + direction until the bright
area appears appropriate.
C Focus 

on the dark area of the image and adjust the setting value of “Dark Level” in the + or - direction until the dark
area appears appropriate.
Reducing the After-image of Fast-moving Images (Blur Reduction) Clear Motion Drive (C.M.D.)
Optimal interpolation according to the content is made possible with the new high-definition image interpolation
technique that supports 3D images.
For some scenes, interpolation may cause distortion in the image. In this case, set to “Off”.
. 1
Press the [C.M.D.] button
0 Pressing the [C.M.D.] button each time switches the mode in the following
sequence: “Off” "“Low”"“High”"“Inverse Telecine”" “Off”... Setting
Description
Off Interpolation is not performed.
Low Softens the image quality.
High Image quality becomes softer than that of the “Low” setting.
Inverse Telecine 60i/60p video images such as those of TVs and DVDs. Suitable 
for original images that are 24-frame film sources.
0 Does not function for 24p video images. * C.M.D. is the abbreviation for Clear Motion Drive.
39
Adjust/Set Intermediate Frame Generation
Intermediate Frame Generation
Interpolation Enabled Original Image HDMI 1INPUT
LENS MEMORY HDMI 2 INFO.MEMORY
MENUMEMORY1 MEMORY2
LENS
CONTROLLENS AP.C.M.D.  
						

							Motion Enhance
Optimal image quality with reduced image blurring is made possible by enhancing the responsiveness of the liquid
crystal panel.
If the image outline is unnatural, set this item to “Off”. 1
Select “Picture Adjust”"“Blur Reduction”
"“Motion Enhance” from the menuSetting
Description
Off Does not perform correction.
Low Reduces image blurring.
High Further reduces image blurring than “Low”.0
If “Keystone” is set to a value other than “0”, the “Motion Enhance” is set to “Off” and grayed out.
0 If “Anamorphic” is set to other than “Off”, the “Motion Enhance” is set to “Off” and grayed out. Viewing High Contrast Images (Lens Aperture)
JVC has developed an image analysis algorithm, which analyzes the state of the video image in real time, and controls the aperture dynamically according to the image information.
This technology enables viewers to enjoy video images with enhanced contrast. 1
Press the [LENS AP.] button
Pressing the [LENS AP.] button each time switches the setting in sequence. Setting
Description
Auto 1 Image contrast is enhanced.
Auto 2 Places emphasis on the gradation.
Manual Does not perform dynamic control. Select this setting to perform adjustment manually. *1 Manual adjustment is disabled in the “Auto 1” and “Auto 2” setting.
To perform adjustment manually, select “Manual”.
*2
When the setting is changed to Auto after performing manual adjustment, the
value set manually will be used as the aperture value for Auto. 40
Adjust/SetHDMI 1INPUT
LENS MEMORY HDMI 2 INFO.MEMORY
MENUMEMORY1 MEMORY2
LENS
CONTROLLENS AP.C.M.D.