JVC Projector Dla Rs56u Instructions Manual

							D­ILA
PROJECTOR
DLA­RS66
DLA­RS56
DLA­RS48
DLA­RS46
Pour utilisation par le client :
Entrerci-dessous le N°de série qui 
est situé sous le boîtier. Garder 
cetteinformation comme référence
pour le futur.Instrucción para el cliente :
Introduzca a continuación el nº de 
serie que aparece en la parte 
inferior lateral de la caja. Conserve
esta información como referencia 
para uso ulterior.For Customer use :
Enter below the serial No. which is
located on the side of the cabinet.
Retain this information for future
reference.
DLA-RS66 / DLA-RS56 /
DLA-RS48 / DLA-RS46Model No.
Serial No.
DLA-RS66 / DLA-RS56 /
DLA-RS48 / DLA-RS46N° de modèle
N° de sérieDLA-RS66 / DLA-RS56 /
DLA-RS48 / DLA-RS46Modelo Nº
Nº de serie
ENGLISHFRANÇAISESPAÑOL/CASTELLANO
INSTRUCTIONS
PC023482999
Getting Started
Set up
Operate
Adjust/Set
Maintenance
Troubleshooting
Others 
						

							Safety Precautions
.cf|;áZL&_4·
IMPORTANT INFORMATION
This product has a High Intensity 
Dis-charge (HID) lamp that contains 
mercury.
Disposal of these materials may be 
regulated in your community due to 
environmental considerations. For 
disposal or recycling information, 
please contact your local authorities or 
for USA, the Electronic Industries 
Alliance: http://www.eiae.org.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO 
NOT EXPOSE THIS APPLIANCE TO RAIN OR 
MOISTURE.
MACHINE NOISE INFORMATION 
(Germany only)
Changes Machine Noise Information Ordinance 3. 
GSGV, January 18, 1991: The sound pressure level 
at the operator position is equal or less than 20 dB 
(A) according to ISO 7779.
FCC INFORMATION (U.S.A. only)
CAUTION:
Changes or modification not approved by JVC could 
void the user’s authority to operate the equipment.
Declaration of Conformity
Model Number : DLA-RS66U/DLA-RS56U/
                              DLA-RS48U/DLA-RS46U
Trade Name : JVC
Responsible party : JVC AMERICAS CORP.
Address : 1700 Valley Road Wayne, N. J. 07470
Telephone Number : 973-317-5000
This device complies with Part 15 of FCC Rules. 
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, 
and (2) this device must accept any interference 
received, including interference that may cause 
undesired operation.
About the installation place
Do not install the projector in a place that cannot 
support its weight securely.
If the installation place is not sturdy enough, the 
projector could fall or overturn, possibly causing 
personal injury.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment 
and receiver.
Consult the dealer or an experienced radio/TV 
technician for help. Connect the equipment into an outlet on a circuit 
different from that to which the receiver is 
connected.
NOTE:
This equipment has been tested and found to comply 
with the limits for Class B digital devices, pursuant to 
Part 15 of the FCC Rules. These limits are designed 
to provide reasonable protec tion against harmful 
interference in a residential installation. This 
equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instruc tions, may cause harmful 
interference to radio communications. However, 
there is no guarantee that interference will not occur 
in a particular installation. If this equipment does 
cause harmful interference to radio or television 
reception, which can be determined by turning the 
equipment off and on, the user is encourage to try to 
correct the interference by one or more of the 
following measures:
WARNING:
THIS APPARATUS MUST BE EARTHED.
CAUTION:
For the customers in Taiwan only
To reduce the risk of electric shock, do not remove 
cover. Refer servicing to qualified service personnel.
This projector is equipped with a 3-blade grounding 
type plug to satisfy FCC rule. If you are unable to 
insert the plug into the outlet, contact your electrician.
2
Getting Started 
						

							150 mm and above
150 mm 
and above300 mm 
and above
200 mm 
and above 300 mm 
and above
PORTABLE CART WARNING
(symbol provided by RETAC)
S3126A
Front
-
-
-
-
-
-
-
-
-
-
-
-
-
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. 
This unit has been engineered and manufactured to 
assure your personal safety. But IMPROPER USE 
CAN RESULT IN POTENTIAL ELECTRICAL 
SHOCK OR FIRE HAZARD. In order not to defeat
the safeguards incorporated into this product, 
observe the following basic rules for its installation, 
use and service. Please read these Important 
Safeguards carefully before use.
All the safety and operating instructions should be read 
before the product is operated.
The safety and operating instructions should be retained for 
future reference.
All warnings on the product and in the operating 
instructions should be adhered to.
All operating instructions should be followed.
Place the projector near a wall outlet where the plug can be 
easily unplugged.
Unplug this product from the wall outlet before cleaning. 
Do not use liquid cleaners or aerosol cleaners. Use a damp 
cloth for cleaning.
Do not use attachments not recommended by the product 
manufacturer as they may be hazardous.
Do not use this product near water. Do not use immediately 
after moving from a low temperature to high temperature, 
as this causes condensation, which may result in fire, 
electric shock, or other hazards.
Do not place this product on an unstable cart, stand, or 
table. The product may fall, causing serious injury to a child 
or adult, and serious damage to the product. The product 
should be mounted according to the manufacturer’s 
instructions, and should use a mount recommended by the 
manufacturer.
When the product is used on a cart, 
care should be taken to avoid quick 
stops, excessive force, and uneven 
surfaces which may cause the product 
and cart to overturn, damaging 
equipment or causing possible injury to 
the operator.
Slots and openings in the cabinet are provided for 
ventilation. These ensure reliable operation of the product 
and protect it from overheating. These openings must not 
be blocked or covered. (The openings should never be 
blocked by placing the product on bed, sofa, rug, or similar 
surface. It should not be placed in a built-in installation such 
as a bookcase or rack unless proper ventilation is provided 
and the manufacturer’s instructions have been adhered to.)
To allow better heat dissipation, keep a clearance between 
this unit and its surrounding as shown below. When this unit 
is enclosed in a space of dimensions as shown below, use 
an air-conditioner so that the internal and external 
temperatures are the same. Overheating can cause 
damage.
-
-
-
-
-
-
-
-
-
-
-
-a)
b)
c)
d)
e)
f)
When the power supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen on the 
product.
If the product has been exposed to rain or water.
If the product does not operate normally by following the 
operating instructions. Adjust only those controls that 
are covered by the Operation Manual, as an improper 
adjustment of controls may result in damage and will 
often require extensive work by a qualified technician to 
restore the product to normal operation.
If the product has been dropped or damaged in any 
way.
When the product exhibits a distinct change in 
performance, this indicates a need for service.
When replacement parts are required, be sure the service 
technician has used replacement parts specified by the 
manufacturer or with same characteristics as the original 
part. Unauthorized substitutions may result in fire, electric 
shock, or other hazards.
Upon completion of any service or repairs to this product, 
ask the service technician to perform safety checks to 
determine that the product is in proper operating condition.
The product should be placed more than one foot away 
from heat sources such as radiators, heat registers, stoves, 
and other products (including amplifiers) that produce heat.
When connecting other products such as VCR’s, and DVD 
players, you should turn off the power of this product for 
protection against electric shock. Power source indicated on the label. If you are not sure of 
the type of power supply to your home, consult your 
product dealer or local power company.
This product is equipped with a three-wire plug. This plug 
will fit only into a grounded power outlet. If you are unable 
to insert the plug into the outlet, contact your electrician to 
install the proper outlet. Do not defeat the safety purpose of 
the grounded plug.
Power-supply cords should be routed so that they are not 
likely to be walked on or pinched by items placed upon or 
against them. Pay particular attention to cords at doors, 
plugs, receptacles, and the point where they exit from the 
product.
For added protection of this product during a lightning 
storm, or when it is left unattended and unused for long 
periods of time, unplug it from the wall outlet and 
disconnect the cable system. This will prevent damage to 
the product due to lightning and power line surges.
Do not overload wall outlets, extension cords, or 
convenience receptacles on other equipment as this can 
result in a risk of fire or electric shock.
Never push objects of any kind into this product through 
openings as they may touch dangerous voltage points or 
short out parts that could result in a fire or electric shock. 
Never spill liquid of any kind on the product.
Do not attempt to service this product yourself as opening 
or removing covers may expose you to dangerous voltages 
and other hazards. Refer all service to qualified service 
personnel.
Unplug this product from the wall outlet and refer service to 
qualified service personnel under the following conditions:
3
Getting Started 
						

							-
-
-
-
-
-
-
-
-
-
-Do not place combustibles behind the cooling fan. For 
example, cloth, paper, matches, aerosol cans or gas 
lighters that present special hazards when over heated.
Do not look into the projection lens while the illumination 
lamp is turned on. Exposure of your eyes to the strong light 
can result in impaired eyesight.
Do not look into the inside of this unit through vents 
(ventilation holes), etc. Do not look at the illumination lamp 
directly by opening the cabinet while the illumination lamp is 
turned on. The illumination lamp also contains ultraviolet 
rays and the light is so powerful that your eyesight can be 
impaired.
Do not drop, hit, or damage the light-source lamp (lamp 
unit) in any way. It may cause the light-source lamp to 
break and lead to injuries. Do not use a damaged light 
source lamp. If the light-source lamp is broken, ask your 
dealer to repair it. Fragments from a broken light-source 
lamp may cause injuries.
The light-source lamp used in this projector is a high 
pressure mercury lamp. Be careful when disposing of the 
light-source lamp. If anything is unclear, please consult 
your dealer.
Do not ceiling-mount the projector to a place which tends to 
vibrate; otherwise, the attaching fixture of the projector 
could be broken by the vibration, possibly causing it to fall 
or overturn, which could lead to personal injury.
Use only the accessory cord designed for this product to 
prevent shock.
For health reasons, please take a break of about 5-15 
minutes every 30-60 minutes and let your eyes rest. Please 
refrain from watching any 3D-images when you feel tired, 
unwell or if you feel any other discomfort. Moreover, in case 
you see a double image, please adjust the equipment and 
software for proper display. Please stop using the unit if the 
double image is still visible after adjustment.
Once every three years, please perform an internal test. 
This unit is provided with replacement parts needed to 
maintain its function (such as cooling fans). Estimated 
replacement time of parts can vary greatly depending on 
frequency of use and the respective environment. For 
replacement, please consult your dealer, or the nearest 
authorized JVC service center.
When fixing the unit to the ceiling, Please note that we do 
not take any responsibility, even during the warranty period, 
if the product is damaged due to use of metal fixtures used 
for fixation to the ceiling other than our own or if the 
installation environment of said metal fixtures is not 
appropriate. If the unit is suspended from the ceiling during 
use, please be careful in regard to the ambient temperature 
of the unit. If you use a central heating, the temperature 
close to the ceiling will be higher than normally expected.
Video images can burn into the electronic com ponent 
parts. Please do not display screens with still images of 
high brightness or high contrast, such as found in video 
games and computer programs. Over a long period of time 
it might stick to the picture element. There is no problem 
with the playback of moving images, e.g. normal video 
footage.-
-
-
-
-
-
-Video images can burn into the electronic com ponent 
parts. Please do not display screens with still images of 
high brightness or high contrast, such as found in video 
games and computer programs. Over a long period of time 
it might stick to the picture element. There is no problem 
with the playback of moving images, e.g. normal video 
footage.
Not using the unit for a long time can lead to malfunction. 
Please power it on and let it run occasionally. Please avoid 
using the unit in a room where cigarettes are smoked. It is 
impos sible to clean optical component parts if they are 
contaminated by nicotine or tar. This might lead to 
performance degradation.
Please watch from a distance three times the height of the 
projected image size. Persons with photosensitivity, any 
kind of heart disease, or weak health should not use 3D 
glasses.
Watching 3D-images might be cause of illness. If you feel 
any change in your physical condition, please stop 
watching immediately and consult a physician if necessary.
When watching 3D images, it is recommended to take 
regular breaks. As the length and frequency of the required 
breaks differ for every person, please judge according to 
your own condition.
If your child watches while wearing 3D glasses, it should be 
accompanied by its parents or an adult guardian. The adult 
guardian should be careful to avoid situations where the 
child’s eyes might become tired, as responses to tiredness 
and discomfort, etc., are hard to detect, and it is possible 
for the physical condition to deteriorate very quickly. As the 
visual sense is not yet fully developed in children under the 
age of 6, please consult a physician in regard to any 
problem concerning 3D-images if necessary.
Note that when using the 3D feature, the video output may 
appear different from the original video image due to image 
conversion on the device.
* DO NOT allow any unqualified person to 
  install the unit.
Be sure to ask your dealer to install the unit 
(e.g.attaching it to the ceiling) since special 
technical knowledge and skills are required for 
installation. If installation is performed by an 
unqualified person, it may cause personal injury or 
electrical shock.
4
Getting Started 
						

							  Power cord
  Power cord
For European continent 
countries For United Kingdom
Green-and-yellow
Blue
Brown
Fuse: Earth
: Neutral
: Live
POWER CONNECTION
WARNING:
WARNING:
Do not cut off the main plug from this 
equipment.
The power supply voltage rating of this product is 
AC110V – AC240V. Use only the power cord 
designated by our dealer to ensure Safety and EMC. 
Ensure that the power cable used for the projector is 
the correct type for the AC outlet in your country. 
Consult your product dealer.
If the plug fitted is not suitable for the power points 
in your home or the cable is too short to reach a 
power point, then obtain an appropriate safety 
approved extension lead or adapter or consult your 
dealer. If nonetheless the mains plug is cut off, 
dispose of the plug immediately, to avoid a possible 
shock hazard by inadvertent connection to the main 
supply. If a new main plug has to be fitted, then 
follow the instruction given below.
Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding 
electromagnetic compatibility and electrical safety.
European representative of JVC KENWOOD Corporation is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg 
Germany THIS APPARATUS MUST BE EARTHED.
IMPORTANT (Europe only):
The wires in the mains lead on this product are 
colored Vert et jaune in accordance with the 
following cord:
IMPORTANT (Europe only):
      POWER CONNECTION
      (United Kingdom only)
When replacing the fuse, be sure to use only a 
correctly rated approved type, re-fit the fuse cover.
IF IN DOUBT —— CONSULT A COMPETENT 
ELECTRICIAN.
Open the fuse compartment with the blade 
screwdriver, and replace the fuse.
(* An example is shown in the illustration below.) As these colors may not correspond with the 
colored making identifying the terminals in your 
plug, proceed as follows:
The wire which is colored green-and-yellow must be 
connected to the terminal which is marked M with 
the letter E or the safety earth or colored green or 
green-and-yellow. The wire which is colored blue 
must be connected to the terminal which is marked 
with the letter N or colored black.
The wire which is colored brown must be connected 
to the terminal which is marked with the letter L or 
colored red. For USA and Canada only
Use only the following power cord.
5
Getting Started 
						

							ENGLISH
Information for Users on Disposal of Old Equipment and Batteries
[European Union only]
These symbols indicate that equipment with these symbols should not be disposed 
of as general household waste. If you want to dispose of the product or battery, 
please consider the collection systems or fa cilities for appr opriate recycling.
Notice:The sign Pb below the symbol for batteries indicates that this battery 
contains lead.
Benutzerinformationen zur Entsorgung alter Geräte und Batterien
[Nur Europäische Union]
Diese Symbole zeigen an, dass derartig gekennzeichnete Geräte nicht als normaler 
Haushaltsabfall entsorgt werden dürfen. We nden Sie sich zur Entsorgung des 
Produkts oder der Batterie an die hierfür vorgesehenen Sammelstellen oder 
Einrichtungen, damit eine fachgerechte Wiederverwertung möglich ist.
Hinweis:
Notification:Das Zeichen Pb unterhalb des Batteriesymbols gibt an, dass diese 
Batterie Blei enthält.
Informations relatives à l’élimination des appareils et des piles usagés, à l’intention 
des utilisateurs
[Union européenne seulement]
Si ces symboles figurent sur les produits, cela signifie qu’ils ne doivent pas être 
jetés comme déchets ménagers. Si vous voulez jeter ce produit ou cette pile, 
veuillez considérer le système de collection de déc hets ou les centres de 
recyclage appropriés.
La marque Pb en dessous du symbole des piles indique que cette 
pile contient du plomb.
Informatie voor gebruikers over het verwijderen van oude apparatuur en batterijen
[Alleen Europese Unie]
Deze symbolen geven aan dat appara tuur met dit symbool niet mag worden 
weggegooid als algemeen huishoudelijk afval. Als u het product of de batterij wilt 
weggooien, kun t u inzamelsystemen of faciliteiten voor een geschikte recycling 
gebruiken.
Opmerking:Het teken Pb onder het batterijsymboo l geeft aan dat deze batterij 
lood bevat.
Battery
Batterie
Pile
Batterij Products
Produkte
Produits
Producten
DEUTSCH
FRANÇAIS
NEDERLANDS
Información para los usuarios sobre la eliminación de baterías/pilas usadas
[Sólo Unión Europea]
Estos símbolos indican que el equipo con estos símbolos no debe desecharse 
con la basura doméstica. Si desea desechar el pro ducto o batería/pila, acuda 
a los sistemas o centros de recogida para que los reciclen debidamente.
Atención:La indicación Pb debajo del símbolo de batería/pila indica que ésta 
contiene plomo.
Baterías/pilas
Productos
ESPAÑOL / CASTELLANO
6
Getting Started 
						

							ITALIANO
Informazioni per gli utenti sullo smaltimento delle apparecchiature e batterie obsolete
[Solo per l’Unione Europea]
Questi simboli indicano che le apparecchiature a cui sono relativi non devono 
essere smaltite tra i rifiuti domestici generici. Se si desidera smaltire questo 
prodotto o questa batteria, prendere in considerazione i sistem i o le strutture di 
raccolta appropriati per il riciclaggio corretto.
Nota:Il simbolo Pb sotto il simbolo delle batter ie indica che questa batteria contiene 
piombo.
Informação para os utilizadores acerca da eliminação de equipamento usado e pilhas
[Apenas União Europeia]
Estes símbolos indicam que o equipamento com estes símbolos não deve ser 
eliminado juntamente com o restante lixo doméstico. Se p retende eliminar 
o produto ou a pilha, utilize os sistemas de recolha ou instalações para uma 
reciclagem apropriada.
Aviso:
Σημείωση:O sinal Pb abaixo do símbolo para pilhas indica que esta pilha contém 
chumbo.
Πληροφορίες για την απόρριψη παλαιού εξοπλισμού και μπαταριών
[ Ευρωπαϊκή Ένωση μόνο ]
Αυτά τα σύμβολα υποδηλώνουν ότι ο εξοπλισμός που τα φέρει δεν θα πρέπει 
να απορριφθεί ως κοινό οικιακό απόρριμμα . Εάν επιθυμείτε την απόρριψη 
αυτού του προϊόντος ή αυτής της μπαταρίας , χρησιμοποιήστε το σύστημα 
περισυλλογής ή εγκαταστάσεις για ανάλογη ανακύκλωση .
Το σύμβολο Pb κάτω από το σύμβολο μπαταρίας υποδηλώνει ότι 
η μπαταρία περιέχει μόλυβδο .
Brugerinformation om bortskaffelse af gammelt udstyr og batterier
[Kun EU]
Disse symboler angiver, at udstyr med disse symboler ikke må bortskaffes som 
almindeligt husholdningsaffald. Hvis du ønsker at smide dette produkt eller batteri 
ud, bedes du overveje at bruge indsamlingssystem et eller steder, hvor der kan 
ske korrekt gen brug.
Bemærk:Tegnet Pb under symbolet for batterierne angiver, at dette batteri 
indeholder bly.
Batteria
Pilha
Μπαταρία
Batteri Prodotti
Produtos
Προϊόντα
Produkter
PORTUGUÊS
ΕΛΛΗΝΙΚΑ
DANSK
Tietoja vanhojen laitteiden ja akkujen hävittämisestä
[Vain Euroopan unioni]
Nämä symbolit ilmaisevat, että symboleilla merk ittyä laitetta ei tulisi hävittää 
tavallisen kotitalousjätteen mukana. Jos haluat hävit tää tuotteen tai sen akun, 
tee se hyödyntämällä akkujen keräyspisteitä tai muita kier rätyspaikkoja.
Huomautus:Akkusymbolin alapuolella oleva Pb-merk intä tarkoit taa, että akku 
sisältää lyijyä.
Akku
Tuotteet
SUOMI
7
Getting Started 
						

							SVENSKA
Information för användare gällande bortskaffning av gammal utrustning och batterier
[Endast den Europeiska unionen]
Dessa symboler indikerar att utrustning med dessa symboler inte ska hanteras 
som vanligt hushållsavfall. Om du vill bortsk affa produkten eller batteriet ska du 
använda uppsamlingssystem eller inrättningar för lämplig återvinning.
Observera:Märkningen Pb under symbolen för batterier indikerar att detta batteri 
innehåller bly.
Opplysninger til brukere om kassering av gammelt utstyr og batterier
[Bare EU]
Disse symbolene viser at utstyr med dette symbolet, ikke skal kastes sammen 
med vanlig husholdningsavfall. Hvis du vil kass ere dette produkte t eller batteriet, 
skal du vurdere å bruke innsam lingssystemene eller andre muligheter for riktig 
gjenbruk.
Merk:
Уведомление:Tegnet Pb under symbolet for batterie r, viser at batteriet inneholder bly.
Сведения для пользователей по утилизации старого оборудования и батарей
[только для Европейского союза]
Данные символы указывают на то, что оборудование, на которое они 
нанесены, не должны утилизироваться, как обычные бытовые отходы. При 
необходимости утилизировать такое изделие или батарею обратитесь в 
специальный пункт сбора для их надлежащей переработки.
Надпись Pb под символом батар ей указывает на то, что 
данная батарея содержит свинец.
Informace pro uživatele k likvid aci starého zařízení a baterií
[Pouze Evropská unie]
Tyto symboly označují, že produkty s těmito symboly se nesmí likvidovat jako 
běžný odpad. Pokud chcete produkt nebo baterii zlikvidovat, využijte sběrný 
systém nebo jiné zařízení, které zaji stí řádnou recyklaci.
Bemærk:Značka Pb pod symbolem pro ba te rie znamená, že tato baterie 
obsahuje olovo.
Batteri
Batteri
Батарея
Baterie Produkter
Produkter
Изделия
Produkty
NORSK
Informacje dla użytkowników dotyczące poz bywania się zużytego sprzętu i baterii
[Tylko kraje Unii Europejskiej]
Te symbole oznaczają, że sprzę tu nie należy wyr zucać razem z odpadami 
gospodarczymi. Jeśli trzeba po zbyć się tego produktu lub ba terii, proszę 
skorzystać z systemu odbioru lub urządzeń do zbió rki odpadów elektronicznych, 
w celu odpowiedniego ponowne go ich przetworzenia.
Uwaga:Oznaczenie Pb, znajdujące się pod symbole m baterii wskazuje, że ta 
bateria zawiera ołów.
Bateria
Produkty
POLSKI
8
Getting Started 
						

							MAGYAR
Felhasználói információ az elhasznált be rendezések és akkumulátorok elhelyezéséről
[Csak az Európai Unióban]
Ez a szimbólum azt jelzi, hogy a berendezés nem helyezhető az általános 
háztartási hulladék közé. Ha meg szeretne szabadulni a terméktől vagy az 
akkumulátortól, akkor legyen tekintettel az gyűjtő rendszerre vagy intézményekre 
a megfelelő hasznosítás érdekében.
Megjegyzés:Az alábbi Pb szimbólum - ha az akkum ulátoron megtalálható - azt 
jelzi, hogy az akkumulátor ólmot tartalmaz.
Informacije za korisnike o odlaganju stare opreme i baterija
[Samo u zemljama gde se primenjuje]
Ovi simboli ukazuju da proizvod i baterije sa ovim simbolom ne smeju biti odloženi 
kao nesortiran kućni otpad. Ako želite da ih se rešite, molimo vas da ne 
upotrebljavate običnu kantu za đubre. Postoje zasebni sistemi za prikupljanje 
ovakvih proizvoda.
Naznaka:Hemijski simbol Pb ispod simbola za baterije ukazuje na to da li baterija 
sadrži olovo.
Akkumulátor
Baterija Termékek
Produkt
Cрпска
9
Getting Started 
						

							Contents
Getting Started
Safety Precautions .................................................. 2
Accessories/Optional Accessories ........................ 11
Check the Accessories ...................................... 11
Optional Accessories ......................................... 11
Main Features ....................................................... 12
Controls and Features ........................................... 14
Main Unit ­ Front ................................................ 14
Main Unit ­ Bottom ............................................. 14
Main Unit ­ Rear ................................................. 15
Main Unit ­ Input Terminals ................................ 16
Remote Control ................................................. 17
Loading Batteries into the Remote 
Control ........ 18
Effective Range of Remote Control Unit ............ 18
Set up
Installing the Projector ........................................... 19
Precautions during Installation ........................... 19
Precautions during Mounting ............................. 20
Adjusting the Position ........................................ 21
Connecting the Projector ....................................... 22
Connecting to the HDMI Input Terminal (Digital
Input) ................................................................. 22
Connecting to the Component Video Input Terminal
(Analog Input) .................................................... 23
Connecting to the PC Input Terminal  ...... 23
Connecting to the LAN Terminal ........................ 24
Connecting to the RS­232C Terminal ................ 24
Connecting to the REMOTE Terminal ............... 24
Connecting to the TRIGGER Terminal ............... 25
Connecting the Power Cord (Supplied Accessory) ...... 25
Operate
Viewing Videos ...................................................... 26
Adjusting the Projector Screen .............................. 28
Adjusting the Lens According to the Projection
Position .............................................................. 28
Saving and Retrieving Adjustment Settings ....... 29
Adjusting Image Quality Automatically According to
the Viewing Environment 
 ............ 31
Setting Screen Correction .................................. 32
Adjusting the Screen Size (Aspect) ................... 33
Viewing 3D 
Movies ................................................ 34
Installing the 3D SYNCHRO EMITTER .............. 34
Viewing 3D Movies ............................................ 35
Converting 2D Movies to 3D Movies for Viewing ....... 35
Adjusting 3D Movies .......................................... 36
Adjust/Set
Selecting an Image Quality According to the Video
Type ...................................................................... 37
Setting the Picture Mode ................................... 37Setting the Color Profile 
 ............. 38
Adjusting Movies for Increased Expressiveness
(Multiple Pixel Control) 
 ................... 40
Fine­tuning the Image Quality ............................... 41
Adjusting the Output Value of the Projected Image
(Gamma)
 ........................................................... 41
Adjusting to the Preferred Gamma Setting (Custom
Gamma) ............................................................ 43
Compensating Highlights and Shadows (Dark/
Bright Level) ...................................................... 44
Adjusting to the Preferred Color (Color
Management) .................................................... 45
Reducing the After­image of Fast­moving Images
(Clear Motion Drive (C.M.D.)) ............................ 46
Adjustments and Settings in the Menu .................. 47
LIst of Menu 
Items ............................................. 47
Picture Adjust .................................................... 49
Input Signal ........................................................ 53
Installation ......................................................... 55
Display Setup .................................................... 61
Function ............................................................. 62
Information ......................................................... 64
Maintenance
Replacing the Lamp .............................................. 65
Lamp Replacement Procedure .......................... 65
Resetting the Lamp Time ................................... 67
Maintaining the Cabinet and Remote Control ........ 67
Cleaning and Replacing the Filter ......................... 68
Troubleshooting
Troubleshooting .................................................... 69
When the following messages appear... ................ 71
Others
External Control .................................................... 72
RS­232C Specifications ..................................... 72
TCP/IP Connection ............................................ 72
Command Format .............................................. 73
Remote Control Code ........................................ 74
Communications Example ................................. 75
Specifications ........................................................ 76
Index ..................................................................... 84
Symbols used in this manual
 indicates a function that is supported by DLA­RS66.
 indicates a function that is supported by DLA­RS56.

 indicates a function that is supported by DLA­RS48.
 indicates a function that is supported by DLA­RS46.
Items not marked with any of the above symbols are
supported by all 
models.
10
Getting Started