JVC Projector Dla Rs40u Instructions Manual

51
ENGLISH
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
Mask It hides the upper, lower, left and right borders of the screen with a black mask. Can be 
individually adjusted vertically and horizontally. Please adjust to your preference.
Setting: Off, 2.5%, 5%, Custom 
[Off] 
Off Not masked.
2.5% Compared to the original video images, around 2.5% around the video imag\
es are 
masked.
5% Compared to the original video images, around 5% around the video images\
 are masked.
Custom...

52
Operation
3
A dju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
3D Format Sets the format of the 3D input signal.
Some signals may not be appended with 3D information themselves, and pro\
jection may 
fail if they are recognized as normal 2D signals. 
When this occurs, configure the settings manually.
(*) It is recommended to read "On 3D" (reference page: 53) before wa\
tching 3D video 
images.
Settings: Auto, Frame Packing, Side by Side, Top & Bottom, 2D 
[Auto] 
Auto Is set...

53
ENGLISH
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
Anamorphic The video images are projected after being enlarged in the vertical dire\
ction of the panel
resolution. This setting is used when one uses the anamorphic lens to enlarge them i\
n the
horizontal direction.
(*) Anamorphic mode cannot be set when there is a 3D signal input.
If a 3D signal is fed in when Anamorphic mode is set to A or B, Anamorphic mode is
automatically turned Off.
Settings: A, B, Off 
[Off]
A Video...

54
Operation
3
Horiz. Red
Horiz. Green
Horiz. Blue (Move red to the left) 1 to 5 (move red to the right) 
[3]
(Move green to the left), 1 to 5 (move red to the right)  [3]
(Move blue to the left) 1 to 5 (move red to the right)  [3]
Vert. Red
Vert. Green
Vert. Blue (move red down) 1 to 5 (move red up) 
[3]
(Move green down) 1 to 5 (move green up)  [3]
(move blue down) 1 to 5 (move blue up)  [3]
[4] Display Setup
Back ColorSets the color of the background, which is displayed without an input si\
gnal....

55
ENGLISH
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
Of f Power is not turned off.
1 Hour Power is turned off automatically after 1 hour.
2 Hours Power is turned off automatically after 2 hours.
3 Hours Power is turned off automatically after 3 hours.
4 Hours Power is turned off automatically after 4 hours.
High  Altitude Mode Set to use at low pressure locations (900m above sea level).
Settings: On, Off 
[Off]
On Set.
Of f Do not set.
Communication 
T erminal  Sets the used...

56
Operation
3
Gamma CurveThe description of the gamma curve that assumes a gamma curve unit. Please read the relevant detailed description 
and professional books.
The gamma curve of the projector to the input video signal determines for each color the relative value of its light output. 
The value of the input video image signal is displayed as a percentage - with 
both being displayed in % as units - of the maxim
um light input signal for bright-
ness and the brightness output value as a percentage of...

57
ENGLISH
This is a description for the 3D-method using this unit, 3D-glasses (sold separately: PK-AG1-B) and an 3D 
synchro emitter (sold separately: PK-EM1). Set the 3D TV and 3D compatibility software to an appropriate 
viewing standard. For viewing, a separate unit compatible with 
3D playback is needed. For detailed description of other 3D 
methods, please read specialized books on this topic. (For the 
sa
ke of explanation, a simplified and exaggerated picture is 
used.)
The 3D scheme of this unit...

58
Operation
3
Separate images which can be seen by the right eye and left eye, respectively , are taken and produced 
separately . Therefore, the image for the left eye is only visible to the left eye, and the images for the right 
eye only or the right eye.  The Human brain perceives stereoscopic images based on image information on 
both sides.
The closer one looks at stereoscopic images, the greater the binocular d
isparity , which means greater 
perception of outward projection.  At the same time,...

59
ENGLISH
The frame sequential method is a way of displaying video images left and right sequentially. The projector 
projects the video images used for the left- and right eyes onto the screen.  The video images for the left 
and right side are only visible with the respective eye, as the left and right side of the 3D glasses are 
opened and shut by a liquid crystal shutter . As a result, the left and right im
ages are seen by the eye and 
show a 3D image.
In order to match the timing of the display of...

60
Maintenance
4
Replacing the Lamp
The lamp is a consumable item. If the image is dark or the lamp is turned of
f, replace the lamp 
unit.
●  When the lamp replacement time approaches, a message is displayed on the screen and the condition 
is indicated by the indicator . (Reference page: 16 to 17, 67)
CAUTION
● Do not insert your hands into 
the opening of the lamp!
This could cause obvious 
deterioration of the  
equipment
’
s function, wounds 
and electric shocks.
●  D o n ot r e pla ce  th e la m p...