JVC Projector Dla Hd350 Instructions Manual

							
Beautiful Images on Big Screen
● Enjoy smooth and high resolution video images with 
      no visible grid, brought about by full high definition 
     resolution of 1920 x 1080 pixels. (P24) 
Perfect for Any Location
● Comes with an 80% vertical and % horizontal lens 
    shift function. (P22)   
						

							
1Getting started
1

Contents 
Getting started
Safety Precautions.............................................2
Main Features...................................................10
Contents...........................................................12
How to Read this Manual/Accessories/       
Optional Accessories.......................................13
About this Manual................................................13
Check the Accessories.......................................13
Optional Accessories..........................................13
Controls and features.............................................14
How to Use the Remote control ......................17
Loading Batteries..................................................17
Effective Range of Remote Control Unit...........17
Preparation
Selecting Connecting Devices....................18
Connecting......................................................1 9
Connecting via Video Cable and S-Video 
Cable................................................................19
Connecting via Component Video Cable........19
Connecting via HDMI Cable..............................20
Connecting via HDMI-DVI Conversion Cable...20
Connecting via SCART-RCA Cable....................21
Connecting via RGB Video Cable......................21
Installing the Projector and Screen.................22
    Set Angle..................................................................22 
    Shift Adjustment.....................................................22
    Screen Size and Projection Distance. . . . . . . . . . . . . . .23
Basic Operation
Projecting Image..............................................24
Convenient Features during Projection...........26
     Setting the Screen Size........................................26
     Masking the Surrounding Area of an Image......26
 
                                                                                                                         
Settings
Setting Menu...................................................28
Procedures for Menu Operation......................28
Setting Menu......................................................29
Customizing Projected Images....................40
Changing the Initial Setting of Picture Mode .40
Registering User-defined Picture Mode...........41
Registering User-defined Picture Mode from the 
Menu...................................................................41
Troubleshooting
Troubleshooting...............................................42
What to Do When these Messages 
Are Displayed.................................................44
About Warning Indicators.............................45
    Actions to Be Taken for Warning Mode...........45
Replacing the Lamp........................................46
     Procedure for Lamp Replacement.................46
     Resetting Lamp Time.........................................48
Cleaning and Replacing the Filter.................49
Others
RS-232C Interface...........................................50
     RS-232C Specifications.......................................50
     Command Format..............................................50
     RS-232C Communication Examples................53
Copyright and Caution.................................54
    About Trademarks and Copyright....................54
　 Caution.................................................................54
      Mounting this Unit..............................................55
Specifications..............................................56
     Dimensions..........................................................57       
						

							
 
 
ENGLISH
 
 
1
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others

How to Read this Manual/
Accessories/Optional Accessories
                                  This manual mainly describes the operating method using the remote control.
                              ● Buttons on the remote control are described as [Button Name].
                              ● Items on the menu are described as “Selection Item”.
                                    ■ Conventions in this manual
                                    
                                     
Buttons to be used are colored in a darker  
shade.
● Instruction manual, warranty card and other printed material are also included.
Please check with your authorized dealer for details.
● Replacement Lamp: BHL5010-S (Lamp Unit)
● Replacement Filter (black in appearance):  PB006560999 (Inner Filter)
    Replacement Filter (white in appearance):  PB006575099 (Inner Filter)
 
Describes the limitations of the functions or usage.
 
Indicates good-to-know information.
 
Describes operational precautions.
    P13          Indicates relevant pages for reference.
BACK
TESTHIDE
BRIGHTCONTSHARP
COLORTINTN.R
GAMMAC.TEMP
INFOLENS.APASPECT
MENU
CINEMA1CINEMA2
NATURALDYNAMICSTAGE
Remote Control
The power cord supplied varies depending on the destination.
Power Cord 
For UK (2m)AAA size Batteries
(for operation confirmation)
For the US market (X1):
For the EU market (X2):
Power Cord
 For European continent countries (2m)
Power Cord 
For USA (2m)
  Optional Accessories 
  About this Manual 
  Check the Accessories  
						

							
1Getting started
1

■ Front Side/Left Side
■ Rear Side/Top Side/Right Side
Controls and features
To connect the power cord (P24)
Remote Sensor (P17)
Lamp Cover (P46)
Exhaust VentRemote Sensor
(P17)
Air Inlet
       Lens Cover (opened)
        (P24)
Lens Cover
 (closed)
           CAUTION
● Do  not  place  your  fingers  in  the  gap  at  the  lens during lens shift adjustment. This may cause injuries 
if your fingers are caught in between the gap. 
    (P22)
● Do not let your fingers or other objects get caught in between the lens cover while closing the cover. This 
can cause injuries or malfunction.   
						

							
 
 
ENGLISH
 
 
15
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others
           CAUTION
● Do  not  close  lens  cover  when  projecting.  Otherwise 
it will cause malfunction, heat and fire.
■ Bottom Surface
Feet: The height (0 to 5 mm) can be adjusted by turning the foot.
Air inlets
Air inlets/Filter (P50)
Light on (Red): Warning mode
  (P45)
Light on/Blinking (Orange):
      Lamp warning
 (P45) 
Light on (Red): 
       Standby mode
Light on (Green): 
       During projection
Blinking (Green): 
      Image is temporarily hidden
      (P25)
Blinking (Red): 
     Cool Down mode
         (P25)
To turn on/off the power
To switch input (P24)
To hide the image temporarily
                        (P25)
Right buttonLeft button
Down button
To display the menu 
 (P28)
To return to the previous menu
Up button
WARNING
LAMP
STANDBY/ON
INPUT
HIDE
MENUBACK
OK
Manual button for lens cover:
             Press and hold the button to open the lens cover.   
						

							
1Getting started
16

Controls and features (continued)
■ Remote Control
To turn on the powerTo turn off the power
To set the screen size (P26)
To control lens (P24)
To set gamma (P40)
To adjust color density (P40)
To adjust brightness (P40)To adjust sharpness (P40)
To adjust contrast (P40)
To display test pattern
To display/close the menu  
(P28)To return to the previous menuBACK
TESTHIDE
BRIGHTCONTSHARP
COLORTINTN.R
GAMMAC.TEMP
INFOLENS.APASPECT
LENSINPUT
STANDBYON
MENU
CINEMA1CINEMA2
NATURALSTAGEDYNAMIC
USER1USER2USER3
RM-MH2GB
LIGHT
To select input mode (P24)
To adjust color temperature (P40)
To hide the image temporarily (P25)
To switch picture mode (P40)
To display information (P39)
Lens Aperture (P40)
To adjust noise reduction (P40)
To adjust hue (P40)
To select or confirm 
To  illuminate  buttons  on  the  remote  control 
for  seconds 
						

							
 
 
ENGLISH
 
 
1
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others

How to Use the Remote control 
                                  
● If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. 
     When this happens, replace the batteries. Insert the batteries according to the  +   -  marks.
● Be sure to insert the - end first.
● If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again
      and operate the remote control.
 ■ When directing the remote control 
     toward this unit
  ● When aiming the remote control towards the  
              remote sensor on this unit, ensure that the  
           distance to the sensor in front or at the rear of  
             this unit is within 7 m.
  ● If the remote control fails to work properly, 
          move closer to this unit.
■ When reflecting off a screen
  ● Ensure that the total of distance A between  
          this unit and screen and distance B between  
           remote control and screen is within 7 m.
  ●  As the efficiency of signals reflected from the  
          remote control unit differ with the type of  
             screen used, operable distance may decrease.
30°
30°
20°
20°
30°30°
20°
20°A
B
This unit
Screen
Remote control
Remote control
This unit
1
  Effective Range of Remote Control Unit 
  Loading Batteries  
						

							
2Preparation
18

Selecting Connecting Devices
● Do not turn on the power until connection is complete. 
● The connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be  
      connected.
● For audio output, connect the device to an amplifier.
● The images may not be displayed depending on the devices and cables to b\
e connected.
     Use an HDMI compliant cable (sold separately) with the HDMI logo. 
● It may not be possible to connect to this unit depending on the dimensio\
n of the connector cover of the cables to be
      connected. 
CB/PBCR/PRHDMI 1HDMI 2YSYNCS-VIDEOVIDEORS-232CRBG
To connect via HDMI terminal (P20)To connect RS-C terminal
(external control) (P50)
To connect via component video terminals (P19)
To connect via video terminal (P19)To connect via S-video terminal (P19)
DVD Recorder DVD Player 
Notebook PC VCR and camcorder 
						

							
 
 
ENGLISH
19
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others

Connecting 
                                  
   
● Set “COMP.” in the setting menu to “Y Pb/Cb Pr/Cr”. (P33 - 12 )
HDMI 1HDMI 2VIDEOS-VIDEOYRCB/PBCR/PRSYNCBGRS-232C
This unit
To component video input terminals
Component video cable (sold separately)
DVD player
CR/PR (red)
CB/PB (blue)
Y (green)
Component video output  terminals
HDMI 1HDMI 2VIDEOS-VIDEOYRBGSYNCCB/PBCR/PR
This unit
To video input terminal
To S-video input terminal
  S-video cable (sold separately)
   video cable (sold separately)
Video output
S-video output
VCR and camcorder
  Connecting via Component Video Cable 
  Connecting via Video Cable and S-Video Cable  
						

							
2Preparation
0

 
                                  
● If noise is produced, take PCs (including notepads) away from this unit.
HDMI 1HDMI 2VIDEOS-VIDEOYRSYNCCB/PBCR/PRBG
This unit
HDMI cable (sold separately)
To HDMI  1 or HDMI   input terminalHDMI output terminal
DVD recorder
HDMI 1HDMI 2VIDEOS-VIDEORS-232CYRSYNCCB/PBCR/PRBG
This unit
To HDMI  1 or HDMI   input terminal
HDMI-DVI conversion cable(sold separately)
Notebook PC
DVI output terminal
Connecting(Continued)   
  Connecting via HDMI Cable 
  Connecting via HDMI-DVI Conversion Cable