JVC Projector Dla Hd350 Instructions Manual

 
 
ENGLISH
1
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others

Picture Adjust > Gamma
07 Gamma
Sets the gradation characteristics of the projected image.
NormalFor normal circumstances, select this
setting.
Gamma  adjustment  cannot  be  performed, 
and only copy is valid.ASet gamma to “A”.
BSet gamma to “B”.
CSet gamma to “C”.
Custom 1
Custom 2
Custom 3
(Gamma Setup)
Three different kinds of gamma can be set according to your preferences.
Correction 
ValueThe...

4Settings


Setting Menu (Continued)
Picture Adjust 
08 Advanced
Adjusts the contours of the image and detailed composition of the image.
Sharpness
Sharpness(Soft) 0 to 100 (Sharp)Adjusts the outline of image.
Detail 
Enhancement(Soft) –50 to 50 (Strong)Emphasizes the details of image.
NR*
RNR(Soft) 0 to 16 (Strong)Adjusts the intensity of removing image noise.
MNR(Soft) 0 to 16 (Strong)Adjusts the intensity of removing mosquito noise.
BNROnReduces block noise.
OffInput signal remains...

 
 
ENGLISH

Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others

Input Signal > HDMI
11 HDMI
Configures HDMI input signal.
Input
AutoAutomatically configures the input signals.
StandardSelect  this  when  the  dynamic  range  of  the  input  images  is 
16-235.
EnhancedSelect  this  when  the  dynamic  range  of  the  input  images  is 
0-255.
Color Space
AutoAutomatically configures the input signals.
YCbCr(4:4:4)Select this when the Y Cb Cr(4:4:4) video signals are...

4Settings


Setting Menu (Continued)
Input Signal > Aspect (Video)
14 Aspect (Video)
Configures the screen size of the projected image.
4:3Sets the screen size of the projected image as 4:3.
16:9Sets the screen size of the projected image as 16:9.
ZoomZooms the images. (This item cannot be selected in the case of HD signals.)
● This setting can also be configured from the remote control. (P16)
● The items cannot be set in the case of PC signals.
Input Signal > Aspect (Computer)
15 Aspect...

 
 
ENGLISH
5
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others

Input Signal > Over Scan
18 Over Scan
Selects whether or not to set over scan for the SD video signal.
OnOver scan the top, left, bottom and right at 2.5% each.
OffDo not over scan.
● This setting is not available when HD signal or PC signal is input.
Input Signal > Mask
19 Mask
Masks (Hides) the outer area of the projected image.
2.5%Mask 2.5% of the screen.
5%Mask 5% of the screen.
OffNo masking.
● Masking...

4Settings
6

Setting Menu (Continued)
Installation > Lens Control
21 Lens Control
Controls the individual motorized function of the lens when setting up t\
he projector
FocusFunction for adjusting the lens focus.
ZoomFunction for adjusting the lens zoom.
ShiftFunction for adjusting lens shift. (Press the up/down/left/right button to shift the screen).
Image Pattern
On
Displays the image pattern in conjunction with the above setting items.
    Display...

 
 
ENGLISH

Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others

Display Setup > Back Color
25 Back Color
Configures the screen color displayed when there is no input signal.
BlueSets screen color to “Blue”.
BlackSets screen color to “Black”.
Display Setup > Menu Position
26 Menu Position
Sets the display position of the menu. The possible positions for displaying the menu are at the four corners or at center of 
the screen.
Display SetupBack ColorMenu PositionMenu...

4Settings
8

Setting Menu (Continued)
Display Setup > Language
31 Language
Sets the language of the menu display.
日本語Japanese
EnglishEnglish
DeutschGerman
EspañolSpanish
ItalianoItalian
FrançaisFrench
PortuguêsPortuguese
NederlandsDutch
SvenskaSwedish
NorskNorwegian
РусскийRussian
中文Chinese 
Function > Lamp Power
32 Lamp Power
Configures the output of the light-source lamp.
NormalFor normal circumstances, select this setting. (150W)
HighSelect this when it is difficult to see the image in a bright...

 
 
ENGLISH
9
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others

Function > High Altitude Mode
35 High Altitude Mode
Selects this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).
OnEnable.
OffDisable.
Information
InputDisplays the currently selected video input.
SourceDisplays the type of the current video input signal. 
(If PC signal is input, this item cannot be displayed)
ResolutionIn the case of PC signal, the...

4Settings
0

Customizing Projected Images
You can adjust the projected image to a desired image quality and registe\
r the adjusted value. (Picture 
Mode) Besides the five default “Cinema 1”, “Cinema 2”, “Natural”, “Stage” and “Dynamic” settings, there are 
3 more types of user-defined settings for Picture Mode.
“Contrast”, “Brightness”, “Color”, “Tint”, “Color Temp.”, “Gamma”, “Sharpness”, 
“NR”, “CTI” and “Lens aperture” are registered in the Picture Mode.
1  Select picture mode
     Adjust...