JVC Projector Dla Hd10ku Instructions Manual
Here you can view all the pages of manual JVC Projector Dla Hd10ku Instructions Manual. The JVC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
31 AImage Adjust Menu To adjust images. ................................................................................................ Gamma Switches the gradation characteristics of the image. Select your preference setting values according to the image to be viewed. ................................................................................................ Color Temp. Adjusts the color temperature of the projected image. Red,Green,Blue ●When you set the AColor Temp.B setting to AUser1B or...
Page 32
![Page 32
32Adjustments and Settings Using Menus (continued)
COptions Menu
................................................................................................
Menu Display
Adjusts the display duration of the menu screen.
●The menu screen display will not disappear automatically
when this is set to AOnB. Press the [EXIT] button to clear
the menu screen.
................................................................................................
Sleep Time
Sets the lapse time before automatically...](http://img.usermanuals.tech/thumb/40/91192/w300_jvc-dla-hd10ku-manual_d-31.png "Page 32
32Adjustments and Settings Using Menus (continued)
COptions Menu
................................................................................................
Menu Display
Adjusts the display duration of the menu screen.
●The menu screen display will not disappear automatically
when this is set to AOnB. Press the [EXIT] button to clear
the menu screen.
................................................................................................
Sleep Time
Sets the lapse time before automatically...")
32Adjustments and Settings Using Menus (continued) COptions Menu ................................................................................................ Menu Display Adjusts the display duration of the menu screen. ●The menu screen display will not disappear automatically when this is set to AOnB. Press the [EXIT] button to clear the menu screen. ................................................................................................ Sleep Time Sets the lapse time before automatically...
Page 33
![Page 33
33
Screen Masking
aProject image onto the screen
bPress the [MENU] button
●The main menu is displayed on the screen.
cPress the [J/K] buttons to select ASetupB, followed
by pressing the [ENTER] button
●The ASetupB menu appears on the right side of the screen.
dPress the [J/K] buttons to select AMaskB, followed
by pressing the [H/I] buttons to select the setting
value
●Masks (Hides) the outer area of the projected image.
ePress the [MENU] button to end
●The menu will disappear from the screen.
Image...](http://img.usermanuals.tech/thumb/40/91192/w300_jvc-dla-hd10ku-manual_d-32.png "Page 33
33
Screen Masking
aProject image onto the screen
bPress the [MENU] button
●The main menu is displayed on the screen.
cPress the [J/K] buttons to select ASetupB, followed
by pressing the [ENTER] button
●The ASetupB menu appears on the right side of the screen.
dPress the [J/K] buttons to select AMaskB, followed
by pressing the [H/I] buttons to select the setting
value
●Masks (Hides) the outer area of the projected image.
ePress the [MENU] button to end
●The menu will disappear from the screen.
Image...")
33 Screen Masking aProject image onto the screen bPress the [MENU] button ●The main menu is displayed on the screen. cPress the [J/K] buttons to select ASetupB, followed by pressing the [ENTER] button ●The ASetupB menu appears on the right side of the screen. dPress the [J/K] buttons to select AMaskB, followed by pressing the [H/I] buttons to select the setting value ●Masks (Hides) the outer area of the projected image. ePress the [MENU] button to end ●The menu will disappear from the screen. Image...
Page 34
![Page 34
34
Picture Shift Setting
aProject the image on the screen
bPress the [MENU] button
●The main menu is displayed on the screen.
cPress the [J/K] buttons to select ASetupB, followed
by pressing the [ENTER] button
●The ASetupB menu appears on the right side of the screen.
dPress the [J/K] buttons to select APicture ShiftB,
followed by pressing the [H/I] buttons to move the
image upwards or downwards
●Set value in the positive (+) direction to move the image upwards and
negative (-) direction to move...](http://img.usermanuals.tech/thumb/40/91192/w300_jvc-dla-hd10ku-manual_d-33.png "Page 34
34
Picture Shift Setting
aProject the image on the screen
bPress the [MENU] button
●The main menu is displayed on the screen.
cPress the [J/K] buttons to select ASetupB, followed
by pressing the [ENTER] button
●The ASetupB menu appears on the right side of the screen.
dPress the [J/K] buttons to select APicture ShiftB,
followed by pressing the [H/I] buttons to move the
image upwards or downwards
●Set value in the positive (+) direction to move the image upwards and
negative (-) direction to move...")
34 Picture Shift Setting aProject the image on the screen bPress the [MENU] button ●The main menu is displayed on the screen. cPress the [J/K] buttons to select ASetupB, followed by pressing the [ENTER] button ●The ASetupB menu appears on the right side of the screen. dPress the [J/K] buttons to select APicture ShiftB, followed by pressing the [H/I] buttons to move the image upwards or downwards ●Set value in the positive (+) direction to move the image upwards and negative (-) direction to move...
Page 35
35 Replacing the Lamp The life of light-source lamps used for this unit is about 2000 hours. ●The lamp life of 2000 hours is merely the average life span of light-source lamps and we do not provide any guarantee for this figure. The lamp life may not reach 2000 hours depending on the operating conditions. Deterioration progresses rapidly when the remaining lamp usage time is short. Get ready or replace with a new lamp (lamp unit) when the accumulated usage time exceeds 1900 hours. Depending on the...
Page 36
Replacing the Lamp (continued) 36 aRemove the control panel cover ●Please refer to page 12 for details on removing the control panel cover. bLoosen the screws and remove the lamp cover ●Loosen the 1 screws with a F screwdriver. cLoosen the screws on the lamp unit and lift up the handle ●Loosen the 2 screws with a F screwdriver. dPull out the lamp unit Procedure for Lamp Replacement Control Panel Cover Lamp Cover Handle Lamp Unit DLA-HD10_EN-FR.book Page 36 Thursday, November 10, 2005 12:54 PM
Page 37
37 eInsert the lamp unit until it is fully in fTighten the screws of the lamp unit and close the handle ●Fasten the 2 screws with a F screwdriver. gAttach the lamp cover and fasten the screw ●Fasten the 1 screw with a F screwdriver. hAttach the control panel cover Handling the Lamp Unit Do not touch the glass surface of the lamp directly with your hand or stain it. Touching it with a bare hand may dirty the surface, hence shortening the lamp life, causing marked performance deterioration such as...
Page 38
![Page 38
Replacing the Lamp (continued)
38
aInsert plug into the power outlet
●The main power turns on and the [STAND BY] indicator on the unit lights
up.
bPress the [EXIT], [ENTER] and [HIDE] buttons
sequentially, then press the [K] button for 2
seconds or more
●The [STAND BY] and [OPERATE] indicators will alternately blink for a
duration of about 3 seconds each. After blinking stops, lamp time resets
and the unit returns to the standby mode ([STAND BY] indicator lights
up).
Resetting Lamp Time
After...](http://img.usermanuals.tech/thumb/40/91192/w300_jvc-dla-hd10ku-manual_d-37.png "Page 38
Replacing the Lamp (continued)
38
aInsert plug into the power outlet
●The main power turns on and the [STAND BY] indicator on the unit lights
up.
bPress the [EXIT], [ENTER] and [HIDE] buttons
sequentially, then press the [K] button for 2
seconds or more
●The [STAND BY] and [OPERATE] indicators will alternately blink for a
duration of about 3 seconds each. After blinking stops, lamp time resets
and the unit returns to the standby mode ([STAND BY] indicator lights
up).
Resetting Lamp Time
After...")
Replacing the Lamp (continued) 38 aInsert plug into the power outlet ●The main power turns on and the [STAND BY] indicator on the unit lights up. bPress the [EXIT], [ENTER] and [HIDE] buttons sequentially, then press the [K] button for 2 seconds or more ●The [STAND BY] and [OPERATE] indicators will alternately blink for a duration of about 3 seconds each. After blinking stops, lamp time resets and the unit returns to the standby mode ([STAND BY] indicator lights up). Resetting Lamp Time After...
Page 39
39 Cleaning and Replacing the Filter Clean the filter regularly. Otherwise, air intake efficiency may deteriorate and malfunction may occur. If the filter is extremely dirty and cannot be cleaned, or if it is damaged, replace the filter with a new one (inner filter: LC32058- 002A). Otherwise, dirt may enter the unit and appear on the screen, preventing you from enjoying the video fully. If dirt has entered the unit or if you need information about the filter, please consult your authorized dealer....
Page 40
![Page 40
40
What to do when these messages are displayed
Message Cause (Details)
No device is connected to the [DVI] terminal.
The DVI-D cable is connected to the [DVI] terminal but
there is no signal input.
NInput the video signals.
A video signal that cannot be used with this unit has
been input.
NInput 1080/50p or 1080/60p video signals.
Upon pressing the [ZOOM T/W] or [FOCUS +/-] button
when AZoom/FocusB of the AOptionsB menu is set to
ALockB.
NSet AZoom/FocusB of the AOptionsB menu to
AUnlockB.
At the...](http://img.usermanuals.tech/thumb/40/91192/w300_jvc-dla-hd10ku-manual_d-39.png "Page 40
40
What to do when these messages are displayed
Message Cause (Details)
No device is connected to the [DVI] terminal.
The DVI-D cable is connected to the [DVI] terminal but
there is no signal input.
NInput the video signals.
A video signal that cannot be used with this unit has
been input.
NInput 1080/50p or 1080/60p video signals.
Upon pressing the [ZOOM T/W] or [FOCUS +/-] button
when AZoom/FocusB of the AOptionsB menu is set to
ALockB.
NSet AZoom/FocusB of the AOptionsB menu to
AUnlockB.
At the...")
40 What to do when these messages are displayed Message Cause (Details) No device is connected to the [DVI] terminal. The DVI-D cable is connected to the [DVI] terminal but there is no signal input. NInput the video signals. A video signal that cannot be used with this unit has been input. NInput 1080/50p or 1080/60p video signals. Upon pressing the [ZOOM T/W] or [FOCUS +/-] button when AZoom/FocusB of the AOptionsB menu is set to ALockB. NSet AZoom/FocusB of the AOptionsB menu to AUnlockB. At the...