JVC Projector Dla Hd1 Instructions Manual

							51
Getting Started Preparation Basic Operation Settings TroubleshootingOthers
ENGLISH
Measures to prevent the unit from toppling or dropping should be taken for safety reasons and accident prevention 
during emergencies including earthquakes.
When mounting this unit on a pedestal or ceiling, remove the 4 feet on the bottom surface and use all the 4 screw 
holes (M5 screws) to mount.
Precautions for Mounting
zSpecial expertise and techniques are required for 
mounting this unit. Be sure to ask your dealer or a 
specialist to perform mounting.
zDepth of the screw holes (screw length) is 30 mm. Use 
screws shorter than 30 mm but longer than 19 mm.
zWhen mounting to a pedestal, ensure sufficient space 
(foot height of 21.5 mm or higher) around the unit so that 
the air inlets are not blocked.
zRegardless whether the unit is still under guarantee, JVC 
is not liable for any product damage caused by mounting 
the unit with non-JVC ceiling fittings or when the 
environment is not suitable for ceiling-mount.
zWhen using the unit hanging from a ceiling, pay attention 
to the surrounding temperature. When a heater is in use, 
temperature around the ceiling is higher than expected.
Mounting this Unit
Ceiling
Air inlets4 locations
„Bottom Surface
DLA-HD1D_EN.book  Page 51  Thursday, January 11, 2007  4:34 PM 
						

							6
52
Others
Specifications
1D-ILA is the abbreviation for Direct drive Image Light Amplifer.
2D-ILA devices are manufactured using extremely high-precision technology. Pixel effectiveness is 99.99 %. Only 0.01 % or less of the pixels 
are either missing or would remain permanently lit up.
3HDCP is the abbreviation for High-bandwidth Digital Content Protection system.
The image of HDMI input terminal may not be displayed due to HDCP specification change.
•Design and specifications are subject to change without prior notice.
•Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension. 
Images may differ from the actual product.
Product NameD-ILA Home Theater Projector
Model NameDLA-HD1
Display Panel/SizeD-ILA device 1 2 /
0.7 (1920 pixels c1080 pixels)c3 (Total no. of pixels: Approx. 6.22 million)
Projection Lens2.0x manual zoom lens (1.4: 1f2.8: 1) (Zoom/Focus: Manual)
Light-source Lamp200 W Ultra-high pressure mercury lamp [Part No.: BHL5009-S]
Screen SizeApprox. 60f200 (Aspect ratio: 16:9)
Projection DistanceApprox. 1.8 mf12.2 m
Color SystemNTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM (Auto/Manual switch)
Analog Video Input Format480i, 480p, 576i, 576p, 720p/50 Hz, 720p/60 Hz, 1080i/50 Hz, 1080i/60 Hz
Digital Video Input Format480i, 480p, 576i, 576p, 720p/50 Hz, 720p/60 Hz, 1080i/50 Hz, 1080i/60 Hz, 
1080p/24 Hz, 1080p/50 Hz, 1080p/60 Hz, VGA 60Hz
Resolution1920 dotsc1080 dots
Input Terminals
Video Input
(VIDEO)1-line, RCA pin jackc1
1.0 V(p-p), 75&, synchronous
S-video Input
(S-VIDEO)1-line, mini DIN 4 pinc1
Y: 1.0 V(p-p), 75&
C: 0.286 V(p-p), 75& (NTSC); 0.3 V(p-p), 75& (PAL)
Component Video Input
(COMPONENT)1-line, RCA pin jackc3
Y: 1.0 V(p-p), 75&
C
B/PB, CR/PR: 0.7 V(p-p), 75&
HDMI Input
(HDMI 1, HDMI 2)2-line, HDMI 19 pinc2 (HDCP compliant) 3
Power RequirementsAC 110 V - 240 V 50/60 Hz
Power Consumption280 W (Standby mode: 2.7 W)
Operation EnvironmentTemperature: 5%f35%
Humidity: 20 %f80 % (No condensation)
(Storage Temperature:b10%f60%)
Installation HeightBelow 5000 ft (Approx. 1524 m)
Dimensions (WidthcHeightcDepth)455 mmc172.5 mmc418.5 mm
(17 7/8 c 6 7/8 c 16 1/2)
(Excluding lens and protrusion portion)
Mass11.6 kg (25.5 lbs)
Accessories(See Page 13)
DLA-HD1D_EN.book  Page 52  Thursday, January 11, 2007  4:34 PM 
						

							53
Getting Started Preparation Basic Operation Settings TroubleshootingOthers
ENGLISH
(Unit: mm)
Dimensions
Center of Lens
„Front„Left Side „Top Surface„Bottom Surface
DLA-HD1D_EN.book  Page 53  Thursday, January 11, 2007  4:34 PM 
						

							6
54
Others
Memo
DLA-HD1D_EN.book  Page 54  Thursday, January 11, 2007  4:34 PM