JVC Projector Dla F110 Specifications

							An all-new 3D D-ILA projector for professional use that provides unparalleled picture quality.
*Optional 3D Glasses (PK-AG1) and 3D Synchro Emitter (PK-EM1) are re\
quired for viewing images in 3D. 
D-ILA-F110
D-ILA Projector 
						

							z Native contrast of 30,000:1 
A native contrast ratio of 30,000:1 is realised by incorporating JVC’\
s original 
D-ILA device with a new optical engine and newly developed lens system. \
Thanks to truer black levels, darker images such as the night sky can be\
 
more precisely reproduced to make the DLA-F110 suitable for displaying 
content with considerable depth such as that shown at museums, 
laboratories, planetariums, etc.
The 0.7-inch full HD D-ILA device is capable 
of simultaneously displaying a full grayscale 
from peak white to the darkest black on a 
single screen. 
30,000:1
WhiteBlackDLA-F110
The iris is opened for bright scenes to 
make peak values brighter while at the 
same time, making black level lighter than 
it should be.
Conventional projector
The iris is closed for dark 
scenes to make black level 
appear darker while at the 
same time, making peak values 
more obscure.
30,000:1 3,000:1
~5,000:1Iris onLamp beamIris offLamp beam
The advantage of native contrast
Conventional projector
D L A - F 11 0
Dynamic high-quality images
MuseumBroadcasting/StudioAcademic /Multi-purpose HallSimulator
PlanetariumMedicalAquarium/MuseumDesign /R & D/ Vir tual Reality
Professional 3D D-ILA projector from JVC delivers remarkable 
image reproduction and answers any installation requirement. 
The DL A-F110 is an all-new professional 3D projector that ensures remarkable image reproduction when used 
for  a  variety  of  applications  such  in  museums,  post-production  studios,  academic  institutions,  planetariums, 
and simulators. It is also ideal for videoconferencing needs and creating virtual reality images, which can only 
be made possible by the D-IL A method. 
z 1,700-lumen brightness 
The optical engine utilises a newly developed 220W ultra-high pressure 
mercury lamp to achieve a brightness level of 1,700 lumens. And the high\
-
performance 2X motorised zoom lens features an all-glass lens system wit\
h 
17 elements in 15 groups, including an ED (extra-low dispersion) lens.\
 The 
combination of this lamp and lens system improves focusing performance 
while drastically reducing chromatic aberration and colour bleeding to r\
ealise 
the projection of very precise images with exceptional depth.  
The lens system is also equipped with a 16-step 
lens aperture function that enables brightness 
adjustment to not only suit user preferences 
but also usage environment, helping to ensure 
deeper and truer black levels. 
Conventional methodD-IL A method D-IL A devices
z Equipped with JVC’s originally developed D-ILA device 
The projector is equipped with a 0.7-inch D-ILA device that is originally\
 
developed by JVC. This full HD resolution (1,920 x 1,080 dot) device i\
s 
capable of fully projecting at UXGA (1,920 x 1,080 pixel) screen resol\
ution like 
that found on notebook PCs. The D-ILA method* is renowned for its smooth\
 
video projection without the “screen-door” effect even for large s\
creen sizes, 
meaning that when combined with the high-definition capability of D-IL\
A 
devices, text and numerals in subtitles or on the screen are reproduced \
clearly without any bleed. D-ILA device is also known for its minimum pi\
xel 
burn-in that helps to ensure long operating life and stable performance.\
 
*The D-ILA method is a device originally developed by JVC and is also kn\
own as the LCOS (liquid crystal on silicon) method.
z Customised gamma control 
Manual adjustment of gamma curve is possible via 
an on-screen display, allowing the viewer to adjust 
projector luminance levels by either increasing 
contrast in scenes that are too dark or diming 
washed-out scenes to ensure precise brightness 
levels suited to individual preferences. Up to three 
settings can be adjusted and stored for future use. 
z New Colour Management System with 7-axis matrix 
In addition to the ordinary 6-axis matrix of red, green, blue, cyan, mag\
enta, 
and yellow, the new Colour Management System features a seventh matrix 
of orange to ensure the precise adjustment of hue, saturation, and inten\
sity. 
The addition of the orange axis also helps in enhancing the selection of\
 the 
colour spectrum for skin tones. And for improved operability, only the c\
olour 
being adjusted will 
be shown on the 
screen while the 
others are displayed 
in black and white.
Displays only the colour being adjusted;   
others are displayed in black and white.  
						

							Flexible installation and easy maintenance
 ± 9 0 °
• The optional 3D Synchro Emitter and 3D glasses are required to view 3D images from the DLA-F110. 3D video software (3D media or output of 3D broadcasts) and a 3D-compatible video player 
are also required. • Perception of 3D images will vary with individual viewers.  • Stop viewing 3D images immediately if any discomfort such headaches, dizziness, eye fatigue, etc. occur.
• Viewing of 3D images by children under the age of five is not recommended.  • Read the Safety Precautions in the User Manual carefully before viewing any 3D source.
Notes about viewing 3D video content
It is now possible to enjoy the excitement of 3D stereoscopic images in the comfort of your 
living room without using a special screen. The DLA-F110 employs a Frame Sequential 3D 
method to display left and right images simultaneously, which when viewed with a pair of 3D 
Active Shutter glasses that darken alternately for each eye, enables 3D images to be viewed. 
Additionally, the fast response characteristics and picture quality offered by D-ILA technology 
allow viewers to enjoy vivid and colourful 3D images with far less crosstalk or image ghosting. 
This D-ILA projector is compatible with a variety of 3D formats including Frame Packi\
ng for  
Blu-ray 3D, Side-by-Side (used mainly for broadcasting), and Top-and-Bottom.
*Optional 3D Glasses (PK-AG1) and 3D Synchro Emitter (PK-EM1) are required for viewing images in 3D.
Note: Keystone, anamorphic mode, and certain other functions cannot be u\
sed while projecting in 3D mode.
D-ILA projection in 3D*
3D Glasses  PK-AG1-B3D Synchro Emitter PK-EM1
z  Optional Equipment
3D image display
Images for left and right eyes alternate  
simultaneously at high speed. 
For the right eye
For the left eye
1080
19 2 0
19 2 0
z Powered lens shift and 2X zoom lens 
As standard equipment, the DLA-F110 features a 2X motorised zoom lens 
with motorised focus that can project images on a large 100-inch screen \
at distances of between 3.1 and 6.2 meters. Additionally, setting up the\
 
projector in locations best suited for projection is facilitated by the \
±80% 
vertical and ±34% horizontal powered lens-shift function with remote \
control. 
NOTE: Shift range values are used to set vertical and horizontal shifts \
individually. 
 
The maximum shift value will differ when vertical and horizontal lens sh\
ift are adjusted together.  
u Horizontal position
Note: Ver tical position is set at 0% (centre)
34% 
maximum of  
projected image
34% 
maximum of 
projected image 80 % 
maximum of 
projected image
80 % 
maximum of 
projected image
u Ver tical position
Note: Horizontal position is set at 0% 
z Tilted installation up to 90° vertically 
The projector can be installed vertically on any surface by 
tilting it up to 90 degrees, making the DLA-F110 suitable 
for use in confined spaces or otherwise difficult installation 
requirements. 
Note that a special bracket is needed if installing the projector pointi\
ng downward 
at an angle of up to 45 degrees from the vertical.  
z Lamp replacement after 3,000 hours (Normal mode) 
A highly efficient and economical 220W ultra-high pressure 
mercury lamp is used to realize an extended operating time 
of up to 3,000 hours in Normal mode. 
z Keystone function 
Distorted images that are caused 
by vertical tilt on the projector 
can be adjusted via the Keystone 
function. When the projector is 
positioned outside of its lens shift 
coverage area, the Keystone 
function digitally adjusts distorted 
images to make them look more 
natural.
Simulated pictures
z A wide range of input and output terminals 
In addition to two HDMI terminals, the DLA-F110 is equipped with two 
analog RGB inputs and is also compatible with PC analogue signals. Other\
 
terminals making the projector seamless with 
various systems and applications include  
RC-232C, a LAN terminal for projector control, 
remote terminals for remote operation via 
connection of an extended IR sensor, and a 
trigger terminal for an anamorphic lens. 
D L A - F 11 0
D-IL A Projector 
						

							472
5
455 45
45
80
11
128
472
179
24
ø
60
454511 128337
290
91
117
55 58
41
37
79
48
Top
Bottom Front
RearSide (left)
■
  External Dimensions
 (unit: mm)
■  Optional Accessories
User-replaceable Lamp
PK-L2210U
3D Glasses  
PK-AG1-B3D Synchro Emitter
PK-EM1
■   Projection Distance Chart*■  Specifications
Copyright 
© 2011, Victor Company of Japan, Limited (JVC). All Rights Reserved.
DISTRIBUTED BY
Design and specifications are subject to change without notice.
The projector is equipped with a high-pressure mercury lamp, which may break, emitting a loud noise, when it is subjected to shock or after it has been used for some length of time.
Please note that, depending on how the projector is used, there can be considerable difference between individual lamps regarding how many hours they will operate before requiring replacement. The owner of the projector is responsible for all costs related to the replacement of the lamp. 
l The projector lamp requires periodic replacement and is not covered by warranty.l Please note that as the D-ILA device is manufactured using highly advanced technologies, 0.01% or fewer of the pixels may be non-performing (always on or off). 
All pictures on this leaflet are simulated. 
All brand or product names may be trademarks and/or registered trademarks of their respective owners. Any rights not expressly granted herein are reserved.
Printed in Japan DLAC-0211
“JVC” is the trademark or registered trademark of Victor Company of Japan, Limited.
Display size (16:9 ) Projection distanceScreen diagonal (inch)W (mm)H (mm)Wide (m) Tele (m)
60 1, 3 28 7471.78 3.66
70 1, 5 4 9 8722.09 4.28
80 1,7 71 9962.40 4.89
90 1, 9 9 2 1,12 1 2.705 . 51
10 0 2, 214 1, 24 5 3.016 .13
11 0 2,435 1, 370 3.316.75
12 0 2,656 1,4 9 4 3.627. 3 6
13 0 2,878 1, 619 3.927. 9 8
14 0 3,099 1, 74 3 4.238.60
15 0 3,320 1,868 4.539.22
16 0 3,542 1, 9 9 2 4.849.84
170 3,76 3 2 ,117 5 .1410.4 5
18 0 3,984 2, 241 5.4511. 0 7
19 0 4,206 2,366 5.7511. 6 8
200 4,427 2,490 6.0612. 3 0DLA-F110
Device  0.7-inch D-ILA x3
Resolution  Full HD D-ILA device (1,920 x 1,080)
Lens  2 x motorised zoom / focus
f=21.4mm - 42.8mm F=3.2 - 4
Lens shift function  ±80% vertical and ±34% horizontal (motorised)
Projection size  60 - 200 inches (screen diagonal)
Light source lamp  220W ultra-high pressure mercury lamp
(lamp life: approx. 3000 hours with lamp used in standard mode)
Brightness  1,700lm
Contrast ratio  Native: 30,000:1
Input 
terminals  Component
1 (RCA)
HDMI  2 (ver.1.4a, 3D, Deep Colour CEC compatible)  
featuring lock function
Analogue RGB (PC)  1 (D-sub 15-pin)
Output 
terminals  Trigger 
1 (mini jack, DC12V/100mA)
3D sync  1 (mini DIN 3-pin)
Control 
terminals  RS232C
1 (D-sub 9-pin)
Remote  1 (mini jack)
LAN (RJ-45)  1
Analogue video input signal formats 480i/p, 576i/p, 720p 50/60, 1080i 50/60
Digital video input signal formats 480i/p, 576i/p, 720p 50/60, 1080i 50/60, 1080p 24/50/60
PC input 
signal  HDMI
VGA, SVGA, XGA, WXGA, WXGA+, SXGA, WSXGA+, WUXGA
Analogue RGB 
(D-sub 15-pin) VGA, SVGA, XGA, WXGA, WXGA+, SXGA, SXGA+, WSXGA+, 
1920 x 1080, MAC 13”, 16”, 19”
3D format  Frame packing
1080p 24, 1080i 50/60, 720p 50/60
Side-by-side  1080p 50/60, 1080i 50/60
Top and bottom  1080p 24, 720p 50/60
Noise level  20dB (with lamp in standard mode)
Consumption current 3.5A
Heat generation  1,260KJ/h (301kcal/h)
Allowable operating temperature range 5° to 35° C
Allowable operating humidity range  20% to 80%
Allowable storage temperature range  -10° to 60° C
Power requirement  AC 110V - 240V, 50/60 Hz
Power consumption  350W (stand-by: 0.9W)
Dimensions: W x H x D, mm  455 x 179 x 472
Weight, kg (including lens) 15.1
*Projection distances are design specifications, so there is ± 5% variation.