JVC Lt Z37sx5 Instructions

							SET UP menu
39
ENGLISH
LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
LANGUAGE
The LANGUAGE setting which was 
performed in the “Initial settings (Setup 
tour)” (page 8) can be changed.
1 Choose LANGUAGE, then press 
the a or 3 button
A sub-menu of the LANGUAGE function 
appears.
2 Press the 6 buttons to choose a 
language. Then press the a 
button
VIDEO-1 SETTING/VIDEO-3 
SETTING
Set the VIDEO-1 SETTING or VIDEO-3 
SETTING correctly according to the video 
signal input from the external device 
connected to the VIDEO-1 or VIDEO-3 
terminal. If this setting is incorrect, images 
will not be displayed.
VIDEO:
If a normal video signal (composite video 
signal) is input.
COMPONENT:
If a Component video signal (Y, Cb/Pb, Cr/
Pr signals) is input.
• For detailed connecting methods, see 
“Additional preparation” on page 42. This 
Television is compatible with the 1080i 
(1125i), 576p (625p) or 480p (525p) 
video signal only when the component 
video signal is input.
• When the input signal is 1080i (1125i), 
576p (625p) or 480p (525p), each signal 
type is displayed at the upper right side on 
the TV screen by setting the input to 
VIDEO-1 or VIDEO-3.
AI VOLUME
You can prevent the sudden increase or 
decrease of sound that occurs when changing 
the channel to another channel.
ON:
This function is turned on.
OFF:
This function is turned off.
• The AI VOLUME function may not 
operate as expected if the sound input 
level from a broadcast station is extremely 
low.
• This function does not work in the 
VIDEO mode.
LANGUAGE
D1002-EN
LT-Z32SX5W_Eng.book  Page 39  Thursday, August 18, 2005  4:38 PM
 
						

							40
SET UP menu
LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
ENGLISH
TELETEXT LANGUAGE
There are four types of teletext language 
groups. Set the teletext language group that 
corresponds to the language of the teletext 
programme that you want to watch.
1 Choose TELETEXT LANGUAGE, 
then press the a or 3 button
2 Press the 6 buttons to choose a 
group
3 Press the a button to complete 
the setting
The menu disappears.
• Languages that are not included in the 
teletext language group that you select, 
the sub-titles of the teletext programme 
will not be displayed properly.
HDMI SETTING
This function is used if you have a DVI or 
HDMI compatible device connected to your 
TV. For details, see “Using the HDMI 
terminal” on page 45.
Group Languages
GROUP-1 Turkish, Hungarian, English, 
German, French, Italian, Spanish, 
Portuguese, Greek, Swedish, 
Finnish
GROUP-2 Polish, Serbian, Croatian, 
Slovenian, Czech, Slovak, 
Rumanian, Hungarian, German, 
French, Italian, Swedish, Finnish
GROUP-3 Russian, Bulgarian, Lettish, 
Lithuanian, Estonian, Ukrainian, 
Serbian, Croatian, Slovenian, 
Czech, Slovak, English, German
GROUP-4 Arabic, Czech, Slovak. Hungarian, 
English, German, French, Italian, 
Spanish, Portuguese, Swedish, 
Finnish
D1003
OK
GROUP-1
>TELETEXT LANGUAGE
GROUP-2
GROUP-3
GROUP-4
-EN
LT-Z32SX5W_Eng.book  Page 40  Thursday, August 18, 2005  4:38 PM
 
						

							41
ENGLISH
LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
Displaying a computer screen
This TV can be used as a computer screen.
Connecting to the computer
Use a D-SUB cable to connect the TV’s PC 
IN terminal to the computer’s analogue RGB 
output terminal.
If you want to listen to the sound from the 
computer, use an audio cable to connect the 
VIDEO-3 AUDIO L/R sound input terminal 
to the computer’s sound output terminal.
When the sound from the computer is mono, 
connect to the VIDEO-3 AUDIO L terminal.
• Refer to the computer manual for a 
detailed explanation of the connections at 
the computer side.
• Ensure that the connectors are facing the 
correct way when connecting.
• After connecting the D-SUB cable, 
tighten the two screws to fix the connector 
in place.
Watching images from a 
computer
After starting the computer, press the 
4 or 6 p buttons 
to choose “PC”
You can listen to the sound when the 
sound from the computer is connected to 
the VIDEO-3 AUDIO L/R sound input 
terminal.
• When the sound from the computer is 
connected to VIDEO-3, by choosing 
external input VIDEO-3 the sound 
from the computer can be listened to, 
but the images from the computer 
cannot be seen.
Table of signals for each type 
of computer
* Only the above formats are supported.
* Even with the above formats and at 
60 Hz, some problems may be 
experienced depending on the quality of 
the synchronous signal. (Depending on 
the quality, some pictures may not be 
displayed properly.)
* Apple Macintosh
* computers are not 
supported.
When a picture is not displayed
Check the computer’s refresh rate and set it 
to 60 Hz. Refer to the computer’s instruction 
manual.
Computers which cannot have their refresh 
rate set to 60 Hz cannot be used with this 
unit.
* Apple Macintosh is a registered 
trademark of Apple Computer, Inc.
IN(ANALOG)LRIN (HDMI AUDIO)
IN(ANALOG)IN(HDMI 
AUDIO)
Resolution Vertical 
frequency 
(Hz)Horizontal 
frequency 
(kHz)
640 × 480 
(VGA)60.0 31.5
1024 × 768 
(XGA)60.0 42.0
LT-Z32SX5W_Eng.book  Page 41  Thursday, August 18, 2005  4:38 PM
 
						

							42
LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
ENGLISH
Additional preparation
Connecting external equipment
Connect the equipment to the TV, making 
the correct rear panel and front panel 
connections.
Before connecting anything:
• Read the manuals that came with the 
equipment.
Depending on the equipment, the 
connection method may be different from 
the diagram. Also, the equipment settings 
may need to change depending on the 
connection method.
• Turn off all the equipment including the TV.• The “Specifications” on page 50 give the 
details of the VIDEO terminals. If you are 
connecting equipment not listed in the 
following connection diagram, see the 
table to choose the best VIDEO terminal.
• Connecting cables are not supplied.
• If the VCR’s audio output is in mono, 
connect the VCR’s AUDIO OUT (audio 
output) terminal and the TV’s VIDEO-3 
AUDIO L terminal with an audio cable.
• Use the supplied cable to connect the 
component device to the VIDEO-1 
COMPONENT Y Pb/Cb Pr/Cr terminal.
„Connecting the PC
For details, see “Connecting to the computer” 
on page 41.
„Using the HDMI terminal
For details, see “Using the HDMI terminal” 
on page 45.
1VCR (composite signal)
2VCR (S-VIDEO signal; Y/C)
3VCR for recording (composite signal)
4DVD player (composite signal)
5DVD player (S-VIDEO signal; Y/C)
6TV game (composite signal)
7TV game (S-VIDEO signal; Y/C)
8Headphones
9Camcorder (composite signal/S-VIDEO 
signal; Y/C)
0DVD player (component video signals; Y, 
Pb/Cb, Pr/Cr)
-Video cable
=Audio cable
~S-VIDEO cable
!Component cable
LT-Z32SX5W_Eng.book  Page 42  Thursday, August 18, 2005  4:38 PM
 
						

							Additional preparation
43
ENGLISH
LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
IN(ANALOG)LRIN (HDMI AUDIO)
IN
(A
NALOG)IN(HDMM
I AUDIO)
without terminal covers
OUT
OUT
OUTIN Supplied cable 
(Component video cable)
LT-Z32SX5W_Eng.book  Page 43  Thursday, August 18, 2005  4:38 PM
 
						

							44
Additional preparation
LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
ENGLISH
„Connecting headphones
Connect the headphones wi th a stereo mini-
jack (3.5 mm diameter) to the headphone 
jack.
• No sound comes from the TV speakers  when the headphones are connected.
„ Using the TV terminal
Outputs the images and sounds you are 
viewing.
• No signal will output through the S VIDEO 
terminal when you are not viewing images 
coming from the S VIDEO input. In this 
case, use the VIDEO terminal instead of 
the S VIDEO terminal.
• Changing over a programme number (PR) also changes over the TV output from the 
OUT terminal.
• When using the VIDEO-1 COMPONENT  Y Pb/Cb Pr/Cr terminal input, VIDEO-3 
COMPONENT input  VIDEO-4 (HDMI) 
input or PC IN input, the sound signal is 
output from the OUT terminal but the 
picture signal is not output.
• Teletext programmes cannot be output.
„ Connecting speakers/amplifier
While referring to the audio equipment 
connection diagram,  connect the audio 
equipment you want to the TV.
You can use external front  speakers to listen 
to the TV sound instead of the TV speakers.
Before connecting anything:
• Read the manuals  provided with the 
amplifier and speakers.
• Turn the TV and amplifier off.
• Note that connecting cables are not  supplied.• The output from the OUT terminal is not interrupted by headphone connection to 
the TV. You cannot cut the sound from 
the front speaker even if you connect a 
headphone to the TV.
• Adjust the volume of the external  speakers with the amplifier.
IN(ANALOG) LRIN (HDMI AUDIO)
IN
(A
NALOG)
IN(HDMI AUDIO)L Rwithout terminal covers
1 Amplifier
2 External speakers (Ma gnetic-shielded type)
Body_Eng.fm  Page 44  Monday, August 22, 2005  10:45 AM
 
						

							Additional preparation
45
ENGLISH
LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
Using the HDMI terminal
„Connecting a HDMI compatible device
Connecting a HDMI compatible device such as a DVD player or DVR allows you to display high 
definition pictures on your TV in their digital form.
Connect the HDMI cable from the digital out on the back of your HDMI device to the 
HDMI terminal on the back of the TV.
When you connect as shown above, set AUDIO in HDMI SETTING menu in the SET UP menu 
to
 AUTO or DIGITAL. Refer to “Setting HDMI SETTING” below.
• To connect the DVI device to the HDMI terminal, connect the DVI terminal of the DVI device to 
the HDMI terminal of the TV with the DVI-HDMI converter cable, and the audio output terminal 
of the DVI device to the IN(HDMI AUDIO) L/R terminal of the TV with the audio cable.
When these connections are made, set AUDIO in HDMI SETTING menu to AUTO or ANALOG.
Refer to “Setting HDMI SETTING” below.
• The HDMI terminal is not compatible with the picture signal of a personal computer.
The HDMI of the TV is compatible with the following video signals.
„Setting HDMI SETTING
1 Press the H button and display the menu bar, press the 5 buttons and 
choose SET UP, and press the 6 buttons and choose HDMI SETTING, and 
press then a button
The HDMI SETTING menu appears.
VGA/60Hz 4:3 576p/50Hz (625p/50Hz) 4:3
480i/60Hz (525i/60Hz) 4:3 576p/50Hz (625p/50Hz) 16:9
480i/60Hz (525i/60Hz) 16:9 720p/50Hz (750p/50Hz) 16:9
480p/60Hz (525p/60Hz) 16:9 720p/60Hz (750p/60Hz) 16:9
576i/50Hz (625i/50Hz) 4:3 1080i/50Hz (1125i/50Hz) 16:9
576i/50Hz (625i/50Hz) 16:9 1080i/60Hz (1125i/60Hz) 16:9
DIGITAL OUT
D
HDMI the HDMI logo andHigh-Definition MultimediaInterface are trademarks or
H
Back of the TVHDMI compatible device
HDMI cable
D0060-EN
SIZE
AUDIO
OK
AUTO
AUTO
> HDMI SETTING
LT-Z32SX5W_Eng.book  Page 45  Thursday, August 18, 2005  4:38 PM
 
						

							46
Additional preparation
LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
ENGLISH
2 Press the 6 buttons and choose SIZE or AUDIO
• SIZE can only be chosen when the picture signal is VGA or 480p.
When setting SIZE:
This option adjusts the position when a VGA or 480p picture signal is being displayed on the 
screen. If the displayed picture is slightly shifted, the position can be adjusted by choosing 1, 2 
or AUTO.
1, 2 or AUTO can be chosen by pressing the 5 buttons.
When setting AUDIO:
Choose DIGITAL when only connecting with the HDMI cable.
Chose ANALOG when a DVI device is connected to the HDMI terminal and the audio output 
terminal of the DVI device is connected to the IN(HDMI AUDIO) terminal.
Choose AUTO when you want the TV to automatically select DIGITAL or ANALOG.
DIGITAL, ANALOG or AUTO can be chosen by pressing the 5 buttons.
LT-Z32SX5W_Eng.book  Page 46  Thursday, August 18, 2005  4:38 PM
 
						

							47
ENGLISH
LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
CH/CC numbers
When you want to use the INSERT function on page 37, find the CH/CC number corresponding to 
the Channel number of the TV channel from this table.
US:  The US channel numbers are the channel numbers used in the United States, 
Philippines, etc.
CCIR:  The CCIR channel numbers are the channel numbers used in the Middle East, 
Southeast Asia, etc.
OIRT:  The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, 
Vietnam, etc.
AUSTRALIA:  The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.
CHChannel
US CCIR OIRT AUSTRALIA
CH02 US-2 E2 R1 AU-0
CH03 US-3 E3 AU-1
CH04 US-4 E4 R2 AU-2
CH05 US-5 E5 R6 AU-6
CH06 US-6 E6 R7 AU-7
CH07 US-7 E7 R8 AU-8
CH08 US-8 E8 R9 AU-9
CH09 US-9 E9
CH10 US-10 E10 R10 AU-10
CH11 US-11 E11 R11 AU-11
CH12 US-12 E12 R12
CH13 US-13
CH14 US-14,  W+29
CH15 US-15,  W+30
CH16 US-16,  W+31
CH17 US-17,  W+32
CH18 US-18,  W+33
CH19 US-19,  W+34
CH20 US-20,  W+35
CH21 US-21,  W+36 E21
CH22 US-22,  W+37 E22
CH23 US-23,  W+38 E23
CH24 US-24,  W+39 E24
CH25 US-25,  W+40 E25
CH26 US-26,  W+41 E26
CH27 US-27,  W+42 E27
CH28 US-28,  W+43 E28
CH29 US-29,  W+44 E29
CH30 US-30,  W+45 E30
CH31 US-31,  W+46 E31
CH32 US-32,  W+47 E32
CH33 US-33,  W+48 E33
CH34 US-34,  W+49 E34
CH35 US-35,  W+50 E35
CH36 US-36,  W+51 E36
CH37 US-37,  W+52 E37
CH38 US-38,  W+53 E38
CH39 US-39,  W+54 E39
CH40 US-40,  W+55 E40
CH41 US-41,  W+56 E41
CH42 US-42,  W+57 E42
CH43 US-43,  W+58 E43
CH44 US-44,  W+59 E44
CH45 US-45,  W+60 E45
CH46 US-46,  W+61 E46
CH47 US-47,  W+62 E47
CH48 US-48,  W+63 E48
CH49 US-49,  W+64 E49
CH50 US-50,  W+65 E50
CH51 US-51,  W+66 E51
CH52 US-52,  W+67 E52
CH53 US-53,  W+68 E53
CH54 US-54,  W+69 E54
CH55 US-55,  W+70 E55
CH56 US-56,  W+71 E56
CH57 US-57,  W+72 E57
CH58 US-58,  W+73 E58
CH59 US-59,  W+74 E59
CH60 US-60,  W+75 E60
CH61 US-61,  W+76 E61
CH62 US-62,  W+77 E62
CH63 US-63,  W+78 E63
CH64 US-64,  W+79 E64
CH65 US-65,  W+80 E65
CH66 US-66,  W+81 E66
CH67 US-67,  W+82 E67
CH68 US-68,  W+83 E68
CH69 US-69,  W+84 E69CCChannel
US CCIR OIRT AUSTRALIA
CC01 S-1 AU-5
CC02 S-2
CC03 S-3
CC04 S-4
CC05 S-5
CC06 S-6 AU-5A
CC07 S-7
CC08 S-8
CC09 S-9
CC10 S-10
CC11 S-11
CC12 S-12
CC13 S-13
CC14 A S-14
CC15 B S-15
CC16 C S-16
CC17 D S-17
CC18 E S-18
CC19 F S-19
CC20 G S-20
CC21 H S-21
CC22 I S-22
CC23 J S-23
CC24 K S-24
CC25 L S-25
CC26 M S-26
CC27 N S-27
CC28 O S-28
CC29 P S-29
CC30 Q S-30
CC31 R S-31
CC32 S S-32
CC33 T S-33
CC34 U S-34
CC35 V S-35
CC36 W S-36
CC37 W+1 S-37
CC38 W+2 S-38
CC39 W+3 S-39
CC40 W+4 S-40
CC41 W+5 S-41
CC42 W+6
CC43 W+7
CC44 W+8
CC45 W+9
CC46 W+10
CC47 W+11
CC48 W+12
CC49 W+13
CC50 W+14
CC51 W+15
CC52 W+16
CC53 W+17
CC54 W+18
CC55 W+19
CC56 W+20
CC57 W+21
CC58 W+22
CC59 W+23
CC60 W+24
CC61 W+25
CC62 W+26
CC63 W+27
CC64 W+28
CC75 X
CC76 Y R3
CC77 Z R4 AU-3
CC78 Z+1 R5
CC79 Z+2 AU-4
CC95 A-5
CC96 A-4
CC97 A-3
CC98 A-2
CC99 A-1
LT-Z32SX5W_Eng.book  Page 47  Thursday, August 18, 2005  4:38 PM
 
						

							48
LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
ENGLISH
Troubleshooting
If a problem arises while you are using the TV, please read this troubleshooting guide carefully 
before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, 
if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may 
think there is a problem with the TV itself.
Important:
• This troubleshooting guide only covers problems whose causes are not easy to decide. If you 
have a question when you are operating a function, read the page(s) for that function carefully, 
not this troubleshooting guide.
• If you follow the advice in this troubleshooting guide without any success, unplug the mains 
plug and ask for your TV to be repaired. Do not attempt to repair the TV by yourself or to 
remove the rear cover of the TV.
„If you cannot turn on the TV
• Is the mains plug connected to the mains 
outlet?
• Make sure you set the PIP/TV/DVD 
switch to the TV position. You cannot 
turn the TV on when the PIP/TV/DVD 
switch is set to the DVD position.
„If you cannot turn off the TV
• Make sure you set the PIP/TV/DVD 
switch to the TV position. You cannot 
turn the TV off when the PIP/TV/DVD 
switch is set to the DVD position.
„No picture or no sound
• Have you chosen a TV channel with very 
poor reception? If so, the BLUE BACK 
function will be activated: the entire 
screen becomes blue, and the sound is 
muted. If you still want to view the TV 
channel, follow the description “BLUE 
BACK” on page 33 to change the BLUE 
BACK function setting to OFF.
• If the SYSTEM setting for a TV channel 
is incorrect, it may prevent the sound 
from being issued. Follow the description 
“EDIT/MANUAL” on page 35 to use the 
MANUAL function to try to change the 
SYSTEM setting.
„Poor picture
• If noise (snow) totally blocks out the 
picture, there may be a problem with the 
aerial or aerial cable. Check the following 
to try to solve the problem:– Have the TV and aerial been connected 
properly?
– Has the aerial cable been damaged?
– Is the aerial pointing in the right 
direction?
– Is the aerial itself faulty?
• If the TV or aerial suffers interference 
from other equipment, stripes or noise 
may appear in the picture. Move any 
equipment such as an amplifier, personal 
computer, or a hair drier, that can cause 
interference away from your TV. Or try 
moving the TV. If the aerial suffers 
interference from a radio tower or high-
voltage wire, please contact your local 
dealer.
• If the TV suffers interference from signals 
reflecting from mountains or buildings, 
double-pictures (ghosting) will occur. Try 
to change the aerial’s direction or replace 
it with one with better directionality.
• Are your COLOUR SYSTEM settings 
correct? Follow the description 
“COLOUR SYSTEM” on page 27 to try 
to solve the trouble.
• Have the COLOUR and BRIGHT settings 
been adjusted properly? Follow the 
description “BRIGHT” and “COLOUR” 
on page 25 to try to adjust them properly.
• Videotaping teletext is not recommended 
because it may not record correctly.
LT-Z32SX5W_Eng.book  Page 48  Thursday, August 18, 2005  4:38 PM