Home > JVC > Television > JVC Lt Z32sx5 Instructions

JVC Lt Z32sx5 Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual JVC Lt Z32sx5 Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Troubleshooting
    49
    ENGLISH
    LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
    • When viewing images from commercially 
    available video software products, or 
    videos from videotapes which have been 
    recorded improperly, the top of the image 
    may be distorted. This is due to the 
    condition of the video signal. There is 
    nothing wrong with the TV.
    • Since this TV is designed to make full use 
    of the resolution of the original video 
    source, the motion may appear unnatural 
    when the video source is input with 
    progressive-scanning component signals.
    If this occurs, change the output setting of 
    the connected device to interlace-
    scanning component signal output. See 
    the instructions that came with the device 
    for more information.
    „Poor sound
    • Have you adjusted BASS or TREBLE 
    properly? If not, follow the description 
    “BASS” or “TREBLE” on page 29.
    • When TV channel reception is poor, it can 
    be hard to hear stereo or bilingual sound. 
    In this case, follow the description 
    “STEREO / I • II” on page 29 to hear the 
    sound more easily by changing it to a 
    mono sound.
    „If the TV does not respond to the 
    remote control
    • Have the batteries of the remote control 
    worn out? Follow the description “Putting 
    the batteries into the remote control” on 
    page 8 and replace them with new batteries.
    • Have you attempted to use the remote 
    control from the sides or rear of the TV or 
    from more than seven metres away from the 
    TV? Use the remote control in front of your 
    TV or from less than seven metres away.
    • When you are viewing a teletext 
    programme, you cannot operate the 
    menus. Press the 4 button to 
    return to the ordinary TV programme, and 
    then try operating the menus.
    • If the TV suddenly stops responding, 
    disconnect the power cord of the TV from 
    the AC outlet. Connect them to the AC 
    outlet again to turn on the TV. If the TV 
    returns to a normal state, it is not a failure.
    „Other issues
    • If the CHILD LOCK function set to ON, 
    you cannot operate the TV with the front 
    control buttons of the TV. Set the CHILD 
    LOCK function to OFF.
    • When the SLEEP TIMER function or 
    AUTO SHUTOFF function operates, the 
    TV is automatically turned off. If the TV 
    suddenly turns off, try to press the # 
    (standby) button to turn on the TV once 
    again. If the TV goes back to normal, 
    there is no problem.
    • When the TV is receiving a wide-screen 
    signal (WSS) or a signal from an external 
    device affecting the screen size, the 
    ZOOM mode automatically changes. 
    When you want to resume the previous 
    ZOOM mode, press the c button 
    again.
    • It takes a short period of time from the 
    time an operation such as changing 
    channels is performed until an image is 
    displayed. This is not a fault. This is the 
    time needed for the image to stabilise 
    before it can be displayed.
    • The TV may make a crackling sound due 
    to a sudden change in temperature. The 
    picture or sound may be normal. If you 
    hear crackling sounds frequently while 
    you are viewing the TV, there may be 
    other causes. As a precaution, ask your 
    service technician to inspect it.
    • The top of the TV and the screen may 
    become hot during use but this has no 
    affect on the performance of the TV. 
    Make sure that the ventilation holes are 
    not blocked.
    • When the picture is unstable, the screen 
    may become white for a moment. This 
    happens when the signal which drives the 
    liquid crystal is missing. This is not a 
    fault.
    • When a still image has been displayed for 
    a long period, a faint residual image may 
    remain on the screen for a short time after 
    the power has been turned off or when 
    another image is displayed. This is not a 
    fault and the image will eventually 
    disappear.
    LT-Z32SX5W_Eng.book  Page 49  Thursday, August 18, 2005  4:38 PM
     
    						
    							50
    LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
    ENGLISH
    Specifications
    We may change the design and specifications without notice.
    Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any 
    commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of 
    the owners of copyright of the original picture sources, as this would be an infringement of 
    copyright.
    Model LT-Z37SX5Broadcasting systems B, G, I, D, K, K1, M
    Colour systems PAL, SECAM, NTSC 3.58/4.43 MHz
    Channels and frequencies VHF low channel (VL) = 46.25 to 168.25 MHz 
    VHF high channel (VH) = 175.25 to 463.25 MHz 
    UHF channel (U) = 471.25 to 863.25 MHz
    • Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 
    to S20) and hyper band (S21 to S41).
    Sound-multiplex systems NICAM (B/G, I, D/K) system, A2 (B/G, D/K) system
    Languages displayed by 
    teletext Please see the table in the description “TELETEXT LANGUAGE” on page 40.
    Teletext systems FLOF (Fastext), WST (World Standard System)
    Power requirements 110 - 240 V AC, 50/60 Hz
    Power consumption 171 W (Standby: 2.6 W)
    Screen size Viewable area 94.9 cm (measured diagonally)
    Audio output Rated Power output: 10 W + 10 W
    Speakers 6.6 cm round × 2
    VIDEO-1 terminal 
    (COMPONENT)RCA connector × 3, S VIDEO connector × 1, Component connector × 1
    • Video input, S VIDEO (Y/C) input, Component video (Y, Cb/Pb, Cr/Pr) input 
    and Audio L/R inputs are available.
    • 480i (525i), 480p (525p), 576i (625i), 576p (625p), 1080i (1125i), 720p/60 
    (750p/60) signals are available.
    VIDEO-2 terminal RCA connector × 3, S VIDEO connector × 1
    • Video input, S VIDEO (Y/C) input and Audio L/R inputs are available.
    VIDEO-3 terminal 
    (COMPONENT)RCA connector × 6
    • Video input, Component video (Y, Cb/Pb, Cr/Pr) input and Audio L/R inputs are 
    available.
    • 480i (525i), 480p (525p), 576i (625i), 576p (625p), 1080i (1125i), 720p/60 
    (750p/60) signals are available.
    VIDEO-4 (HDMI) terminal HDMI connector × 1, Digital video input and digital audio input available. (Refer 
    to page 45 for details.)
    IN(HDMI AUDIO) terminal RCA connector × 2
    • Audio L/R inputs are available. (Refer to page 45 for details.)
    OUT terminal RCA connectors × 3, S VIDEO connector × 1
    • Video output, S VIDEO (Y/C) output and Audio L/R outputs are available.
    • Output level 0.5 Vrms.
    PC IN terminal Analogue RGB D-SUB (15 pin) × 1
    • PC signal is available. Refer to page 41 for details of the signals which can be 
    input.
    Headphone jack Stereo mini-jack (3.5 mm in diameter)
    Dimensions (W × H × D) 926 mm × 687 mm × 325 mm
    926 mm × 632 mm × 109 mm (without stand)
    Weight 26.6 kg
    19.9 kg (without stand)
    Accessories Remote control unit × 1 (RM-C1830)
    AA/R6 dry cell battery × 2
    Component video cable × 1
    LT-Z32SX5W_Eng.book  Page 50  Thursday, August 18, 2005  4:38 PM
     
    						
    							Specifications
    51
    ENGLISH
    LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
    We may change the design and specifications without notice.
    Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any 
    commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of 
    the owners of copyright of the original picture sources, as this would be an infringement of 
    copyright.
    Model LT-Z32SX5/LT-Z32SX5WBroadcasting systems B, G, I, D, K, K1, M
    Colour systems PAL, SECAM, NTSC 3.58/4.43 MHz
    Channels and frequencies VHF low channel (VL) = 46.25 to 168.25 MHz 
    VHF high channel (VH) = 175.25 to 463.25 MHz 
    UHF channel (U) = 471.25 to 863.25 MHz
    • Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 
    to S20) and hyper band (S21 to S41).
    Sound-multiplex systems NICAM (B/G, I, D/K) system, A2 (B/G, D/K) system
    Languages displayed by 
    teletext Please see the table in the description “TELETEXT LANGUAGE” on page 40.
    Teletext systems FLOF (Fastext), WST (World Standard System)
    Power requirements 110 - 240 V AC, 50/60 Hz
    Power consumption 147 W (Standby: 2.6 W)
    Screen size Viewable area 80 cm (measured diagonally)
    Audio output Rated Power output: 10 W + 10 W
    Speakers 6.6 cm round × 2
    VIDEO-1 terminal 
    (COMPONENT)RCA connector × 3, S VIDEO connector × 1, Component connector × 1
    • Video input, S VIDEO (Y/C) input, Component video (Y, Cb/Pb, Cr/Pr) input 
    and Audio L/R inputs are available.
    • 480i (525i), 480p (525p), 576i (625i), 576p (625p), 1080i (1125i), 720p/60 
    (750p/60) signals are available.
    VIDEO-2 terminal RCA connector × 3, S VIDEO connector × 1
    • Video input, S VIDEO (Y/C) input and Audio L/R inputs are available.
    VIDEO-3 terminal 
    (COMPONENT)RCA connector × 6
    • Video input, Component video (Y, Cb/Pb, Cr/Pr) input and Audio L/R inputs are 
    available.
    • 480i (525i), 480p (525p), 576i (625i), 576p (625p), 1080i (1125i), 720p/60 
    (750p/60) signals are available.
    VIDEO-4 (HDMI) terminal HDMI connector × 1, Digital video input and digital audio input available. (Refer 
    to page 45 for details.)
    IN(HDMI AUDIO) terminal RCA connector × 2
    • Audio L/R inputs are available. (Refer to page 45 for details.)
    OUT terminal RCA connectors × 3, S VIDEO connector × 1
    • Video output, S VIDEO (Y/C) output and Audio L/R outputs are available.
    • Output level 0.5 Vrms.
    PC IN terminal Analogue RGB D-SUB (15 pin) × 1
    • PC signal is available. Refer to page 41 for details of the signals which can be 
    input.
    Headphone jack Stereo mini-jack (3.5 mm in diameter)
    Dimensions (W × H × D) 808 mm × 627.2 mm × 308.4 mm
    808 mm × 558.5 mm × 108 mm (without stand)
    Weight 20.4 kg
    17.0 kg (without stand)
    Accessories Remote control unit × 1 (RM-C1830)
    AA/R6 dry cell battery × 2
    Component video cable × 1
    LT-Z32SX5W_Eng.book  Page 51  Thursday, August 18, 2005  4:38 PM
     
    						
    							52
    Specifications
    LT-Z37/32/26SX5/32SX5W / LCT1869-002C / English
    ENGLISH
    We may change the design and specifications without notice.
    Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any 
    commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of 
    the owners of copyright of the original picture sources, as this would be an infringement of 
    copyright.
    Model LT-Z26SX5Broadcasting systems B, G, I, D, K, K1, M
    Colour systems PAL, SECAM, NTSC 3.58/4.43 MHz
    Channels and frequencies VHF low channel (VL) = 46.25 to 168.25 MHz 
    VHF high channel (VH) = 175.25 to 463.25 MHz 
    UHF channel (U) = 471.25 to 863.25 MHz
    • Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 
    to S20) and hyper band (S21 to S41).
    Sound-multiplex systems NICAM (B/G, I, D/K) system, A2 (B/G, D/K) system
    Languages displayed by 
    teletext Please see the table in the description “TELETEXT LANGUAGE” on page 40.
    Teletext systems FLOF (Fastext), WST (World Standard System)
    Power requirements 110 - 240 V AC, 50/60 Hz
    Power consumption 116 W (Standby: 2.6 W)
    Screen size Viewable area 64.8 cm (measured diagonally)
    Audio output Rated Power output: 10 W + 10 W
    Speakers 6.6 cm round × 2
    VIDEO-1 terminal 
    (COMPONENT)RCA connector × 3, S VIDEO connector × 1, Component connector × 1
    • Video input, S VIDEO (Y/C) input, Component video (Y, Cb/Pb, Cr/Pr) input 
    and Audio L/R inputs are available.
    • 480i (525i), 480p (525p), 576i (625i), 576p (625p), 1080i (1125i), 720p/60 
    (750p/60) signals are available.
    VIDEO-2 terminal RCA connector × 3, S VIDEO connector × 1
    • Video input, S VIDEO (Y/C) input and Audio L/R inputs are available.
    VIDEO-3 terminal 
    (COMPONENT)RCA connector × 6
    • Video input, Component video (Y, Cb/Pb, Cr/Pr) input and Audio L/R inputs are 
    available.
    • 480i (525i), 480p (525p), 576i (625i), 576p (625p), 1080i (1125i), 720p/60 
    (750p/60) signals are available.
    VIDEO-4 (HDMI) terminal HDMI connector × 1, Digital video input and digital audio input available. (Refer 
    to page 45 for details.)
    IN(HDMI AUDIO) terminal RCA connector × 2
    • Audio L/R inputs are available. (Refer to page 45 for details.)
    OUT terminal RCA connectors × 3, S VIDEO connector × 1
    • Video output, S VIDEO (Y/C) output and Audio L/R outputs are available.
    • Output level 0.5 Vrms.
    PC IN terminal Analogue RGB D-SUB (15 pin) × 1
    • PC signal is available. Refer to page 41 for details of the signals which can be 
    input.
    Headphone jack Stereo mini-jack (3.5 mm in diameter)
    Dimensions (W × H × D) 703 mm × 553 mm × 308.3 mm
    703 mm × 483 mm × 107 mm (without stand)
    Weight 19.6 kg
    16.2 kg (without stand)
    Accessories Remote control unit × 1 (RM-C1830)
    AA/R6 dry cell battery × 2
    Component video cable × 1
    LT-Z32SX5W_Eng.book  Page 52  Thursday, August 18, 2005  4:38 PM
     
    						
    							LT-Z37/32/26SX5/32SX5W / LCT1869-002C / All Cover
    Cover03
    LT-Z32SX5W_Eng.book  Page 1  Thursday, August 18, 2005  4:38 PM
     
    						
    							© 2005 Victor Company of Japan, Limited
    LT-Z37/32/26SX5/32SX5W / LCT1869-002C / All Cover
    Cover04
    0805TKH-CR-VP
    LT-Z32SX5W_Eng.book  Page 2  Thursday, August 18, 2005  4:38 PM
     
    						
    All JVC manuals Comments (0)

    Related Manuals for JVC Lt Z32sx5 Instructions