JVC Lt 32ex19 Instructions

							WIDE LCD PANEL TV
INSTRUCTIONS
LT - 32EX19
LT - 32BX19
GGT0303-001A-H Safety precautions ............................... 2
Remote control buttons and functions
 ... 3
Set up and connections ....................... 4
Initial settings ....................................... 6
Registering / Editing channels ............. 6
PREPARATION
Picture setting ...................................... 7
Sound setting ...................................... 9
Useful functions ................................. 10
Viewing Teletext ................................. 12
Watching Video or DVDs ................... 12
Troubleshooting ................................. 13
Technical information ......................... 14
CH/CC List ......................................... 15
Specifi cation ...................................... 16FUNCTIONSREFERENCE
Contents
ENGLISH 
This illustration shows LT-32EX19.
The illustrations of LT-32EX19 is used in this instruction manual 
for explanation purpose. Your TV may not look exactly the same 
as illustrated.
GGT0303-001A-H-EN.indd   1GGT0303-001A-H-EN.indd   1
3/12/09   11:14:03 AM3/12/09   11:14:03 AM
 
						

							2
JVC
•  Follow this manual 
regarding setup!
 - 
Connect only to a 110-240 V,
 
50/60Hz AC  outlet.
•   Make enough room for 
inserting and removing 
the power plug! 
•   Place the TV as close to 
the outlet as possible!
  -  The main power supply 
for this TV is controlled by 
inserting or removing the 
power plug.
•   Never cut or damage the 
power cord!
  -  If the AC plug is not the 
right shape, or the power 
cord is not long enough, 
use an appropriate plug 
adapter or extension 
cable. (Consult your 
retailer.)
•   Unplug the power cord 
when going out!
 -  The power buttons on the 
remote control and the 
TV unit cannot completely 
turn off the TV. (Make 
appropriate arrangements 
for bedridden people.)
  Thank you for buying this JVC LCD panel television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
•   Do not allow the TV to fall!
  -  Do not rest your elbows on, or allow 
children to hang from the TV.
  -  There is a risk that the TV will fall and 
cause injuries.
  -  Make use of the hole on the back of the 
stand to prevent the TV from falling easily. 
(P. 4)
• For more details on installation, usage and safety 
						

							3
OK
 16:9 Zoom
•  Insert the batteries
  Use two “AAA/R03” dry cell 
batteries. Insert the batteries from 
the 
· end, making sure the 
· and 
ª polarities are correct.
“AAA/R03” 
Batteries
Turn the volume off/on
Change channel/page
Channel selection
Select the desired channel number.
For Hyper Scan
PR changes without changing the 
picture. Once you stop pressing 
CHANNEL+ or CHANNEL - button, 
picture will change to the desired PR.
Press and hold
CHANNEL
Select TV or Video input
Channel informationTurn the TV on from standby
Colour button
Turn on “Clear SD”
Turn on “Sound Meister”
Turn on “Eco Mode”
To Teletext (P. 12)
Display on-screen menu
Operate the menu
To previous screen
Adjust the volume, Turn off muting
View the Teletext (P. 12)Change the aspect ratio (P. 8)
1. Select
2. Set
Favourite channel setting. (P. 11)
1. Register the favourite channel
2. Recall the favourite channel
  •  If the favourite channel has not been registed 
then “No Memory” will be displayed.will be displayed.
Programmed!Press and hold
Press
 Set 1-4 ? Favourite 1-4 ?
Press number 
button (1-4 only)
Press number 
button (1-4 only)
:OOM!UTO 0ANORAMIC
2EGULAR
0ANORAMIC
:OOM
:OOM
:OOM3UBTITLE
&ULL
Move the picture with 
5 or ∞ while this bar 
is displayed.V-Scroll
WARNING:
Batteries shall not be exposed 
to excessive heat such as 
direct sunshine, fi re or the like.RETURN PLUS function
Return to the frequently viewed channel.Choose the channel 
you want to 
programme
Return Plus
Programmed!Return Plus
Canceled!
To cancel
RETURN function
If you have not set or have cancelled the RETURN PLUS 
channel, this will return to the previously viewed channel.
Press and hold
RETURN +
Press and hold
RETURN +
If this symbol 
is shown, it is 
only valid in the  
European Union.
  Remote control buttons and functions
GGT0303-001A-H-EN.indd   3GGT0303-001A-H-EN.indd   3
3/12/09   11:14:09 AM3/12/09   11:14:09 AM
 
						

							4
TV/VIDEO
MENU/OKCHANNEL
VOLUME
MM MM MMMM
MM
VIDEO-2VIDEO-2
RLV12
  Set up and connectionsCare when setting
Hole for belt
Belt 
(not provided)
Screw (not provided) Power lamp
 ON : Lit (Blue)
 OFF : Unlit
    Power lamp lights
    while the TV is on.
     • “Power Lamp” (P. 11)
Remote control sensorSwitch between TV / VIDEO 
devices
Display on-screen menu / set
Change channel / Page / 
Hyper Scan Function (P. 3)
Volume / Adjust
Power On / Off
To Headphone (P. 5)
■ Power requirements
• Connect the power cord only to a 110-240V, 50/60Hz AC outlet.
■  When attaching the TV to the wall, use the optional JVC wall
 mounting unit
• Consult a qualifi ed technician.
• JVC assumes no responsibility for damage due to improper mounting. 
• 200 mm x 200 mm mount which conforms to VESA standards.
■ Installation requirements
• To avoid overheating, ensure the unit has ample room.
•  After all the connections have been made, insert the plug into an 
AC outlet.
Connect an aerial and VCR / DVD Player
AERIAL
OR
VCR (DVD Player)
-  If you have any problem with assembly, please contact a retailer or 
a dealership.
Note: 4 screws included.
Stand Assembly
-  Insert the stand into the panel at the position where the screw 
holes are, and fasten the screws.
• To prevent the TV from falling thread 
the belt through the hole on the back of 
the stand and secure it to the TV rack.
LT-32EX19
LT-32EX19
LT-32EX19
LT-32EX19
GGT0303-001A-H-EN.indd   4GGT0303-001A-H-EN.indd   4
3/12/09   11:14:11 AM3/12/09   11:14:11 AM
 
						

							5
OUTPUT
VIDEO-2 VIDEO-1
PC
PCAUDIO
HDMI-1
( DVI ANALOGAUDIO )
RL
V RL
RLV
Pr
PbY
PC IN(D-SUB)
RLV
JVC
(L) (R)
VIDEO-1
RL
V
Pr
PbY
VIDEO-1
RL
V
Pr
PbY
JV
C
HDMI-1 HDMI-2
HDMI-3
DIGITAL VIDEO/AUDIO
You can connect many different devices to the rear panel of the TV.
Please read the user manuals of each device before setup.
(Connecting cables are not supplied with this TV.)
Component inputGame consoles Video cameraPC
VIDEO-1
 Watching videos
Output   Input
•
 Composite signal / 
Component signal (P. 16)
 
•  Sound L / R
•  Use Component signal
  “Video - 1 Setting” (P. 12)VIDEO-2
 Watching videos
Output   Input
• Composite signal
•  Sound L / R
HDMI-1
 
HDMI-2
  Connecting HDMI devices
HDMI-3
Output Input
•  HDMI signal (P. 16)
•  “HDMI Setting”  (P. 12)
•  HDMI-2 and HDMI-3 inputs do not 
support analogue sound.
•  Connect a “DVI” device to 
 “HDMI-1” (P.14)
•  Please use a High Speed HDMI
TM 
Cable. High Speed HDMI
TM Cables 
are tested to carry an HD signal up 
to 1080p and higher.
OUT
 
Video and sound signal of a TV 
channel you are viewing outputs 
from this terminal
Output  
• Composite signal
•  Sound L / R
Composite inputGame Video
VCR
PC input line in
HDMI
TM Connector.
DVD Player
Amplifi er VCR / DVD recoder Headphones
DVD player
(HDMI compatible)HD Video camera
Set up and connections (continued)
DVD player
(HDMI compatible) To “HDMI-1” To “HDMI-3”
To “HDMI-2”
•  Check for PC compatibility.
  “PC signals that can be displayed” (P. 14)
To Video-2
LT-32EX19
GGT0303-001A-H-EN.indd   5GGT0303-001A-H-EN.indd   5
3/12/09   11:14:12 AM3/12/09   11:14:12 AM
 
						

							6
OK
Manual
Insert/Delete
IDMove
OKOK
OOKK
OKOK
OOKKOOKK
Language>
English
0YCC
						

							7
OK
OK
OOKK
1. Display “Picture” menu 2. Select item and setting or adjust
Picture
0ICTURE-ODE
3HARPNESS
#OLOUR
4INT
7HITE ALANCE
&EATURES ACKLIGHT
RIGHTNESS#ONTRAST
0ICTURE



RIGHT#OOL
• To enter an items menu
MENUPicture ModeYou can select a preset picture setting according to your favour.
 Bright  :  Hightens contrast and sharpness.
Game Mode  : Adjust sharpness of the picture when play the game.
Soft  :  Softens contrast and sharpness.
Standard  :  Standardize picture adjustment.BacklightYou can change the backlight brightness.
 Darker 
 Brighter
ContrastYou can change the contrast of the picture.
 Lower 
 Higher
BrightnessYou can change the brightness of the picture.
 Darker 
 Brighter
SharpnessYou can change the sharpness of the picture.
 Softer 
 Sharper
ColourYou can change the colour of the picture.
 Lighter 
 Deeper
TintYou can change tint only in NTSC.
 Reddish 
 Greenish 
White BalanceYou can change the white balance of the picture to better match the type of video being view.
 Cool  :  Bluish white colour.
Warm  :  Reddish white colour.
Mid  :  Normal white colour.
1. Select
2. Enter1. Select
3. Finish1. Select
2. Enter 2. Adjust
 
Picture setting
GGT0303-001A-H-EN.indd   7GGT0303-001A-H-EN.indd   7
3/12/09   11:14:18 AM3/12/09   11:14:18 AM
 
						

							8
16 : 9
4 : 3
14 : 9
Panoramic
Regular/Slim
14:9 Zoom
!UTO
 :OOM 2EGULAR
 :OOM0ANORAMIC
:OOM
 
0ANORAMIC
:OOM3UBTITLE
&ULL
#LEAR3$
3MART0ICTURE
$YNAMICACKLIGHT $IGITAL6.2
$IGI0URE0ULL$OWN/FF
0ICTURE-ANAGEMENT
#OLOUR3YSTEM
:OOM -0%.OISE2EDUCTION#OLOUR-ANAGEMENT
&EATUREA
/FF /FF /FF
/FF
/FF
/FF /FF
/FF
•  When 720p or 1080i or 1080p signal is 
received, “Full”, “Slim” and “Panoramic 
Zoom” can be selected.
•  In PC mode, “Regular” and “Full” can 
be selected.
FeaturesFiner Picture adjustment
:  For clearly picture (Off / Mode-1 / Mode-2)
  When Clear SD set to Mode-1 or Mode-2, then Digital VNR, DigiPure, Picture Management 
and MPEG Noise Reduction cannot operate.
:  Reduce the amount of noise in original picture. (Off / On)
:  For natural - looking outlines (Off / On)
: For smooth cinema fi lm (Auto / Off / On)
:  For natural - looking pictures (Off / On)
:  Fix bright / dark pictures. (Off / On)
:  Make it easier to view white areas (Off / On)
:  Reduce the brightness of the backlight when the screen is dark (Off / On)
:  Reduce MPEG video noise (Off / On)
: 
When there is no colour, change the colour system. (PAL / SECAM / NTSC 3.58 / NTSC 4.43 / AUTO):  Change the aspect ratio.
Clear SDDigital VNRDigiPurePull Down
Colour ManagementPicture Management
Smart PictureDynamic Backlight
MPEG Noise 
ReductionColour System
Zoom
Picture setting (continued)
GGT0303-001A-H-EN.indd   8GGT0303-001A-H-EN.indd   8
3/12/09   11:14:19 AM3/12/09   11:14:19 AM
 
						

							9
OK
1. Select
2. Enter
Sound
 Stereo/I
■IISound
 Sound Meister
 Voice Enhancer
 Al Volume Treble
 Surround Bass Balance
Off
Off OffD
						

							10
OK
1. Select
2. Enter
Features
Off
Off
Features
>
>
 On Timer
>
Off Off
Off Child Lock
Auto Shutoff
Favourite Setting 
Eco Mode Sleep Timer
Blue Back Channel Guard
Power Lamp
OK
1. Select PR 
channel
2. Set
OK
1. Select “On 
Timer”
OK
3. Set
OK
1. Select a time in minutes
2. Set
OK
1. Select a 
number
OK
1. Select a 
channel
Features
>
>
 PR                                        02 
 On Timer                          00  :  00
On Timer
> >
>
9 1
72
3
4
56
8
0
Sleep Timer>
Off0120
>
>
Set ID No.>
0    0    0    0
PR ID CH/CC01
05
07
08
10090602
CH 07
CH 76
CH 12 CH 02
CH 03
CH 09
CH 05
CH 02
CH 15
CH 28 0403
Channel Guard>>ABCDBB C
EF AB C
2. Select item
2. To the next 
column
3. Enter
(Blue)
Lock / Release
0
OK
• To enter an items menu
1. Select
2. Enter
OK
1. Select
3. Finish 2. Adjust
MENU
1. Display “Features” menu.
2. Select item and setting or adjust.
1. Select PR channel that you want to watch.
2. Set the On time to your desired period at time.
1. Select “Channel Guard” Note : Press 
(Blue)
  for reset time setting.
•  View a locked channel by use the numerical buttons to enter the channel number. When 
 appears, press “DISPLAY” 
button and enter your “ID No.”
2. Select a channel and lock it ( 
 : locked ) Note :  When the remaining elapse is one minute, 
“Good Night!” appears on the screen.
  Useful functions
On Timer
TV to turn on 
automatically from 
standby mode at 
a set channel and 
time.Sleep Timer
TV to turn off 
automatically to 
standby mode after 
a set time.Channel Guard
Stop children from 
watching specifi c 
channels.
GGT0303-001A-H-EN.indd   10GGT0303-001A-H-EN.indd   10
3/12/09   11:14:21 AM3/12/09   11:14:21 AM