JVC Kdar760 User Guide

ENGLISH
ESPAÑOL
FRANÇAIS
CD RECEIVER  KD-AR760/KD-G710
RECEPTOR CON CD  KD-AR760/KD-G710
RECEPTEUR CD  KD-AR760/KD-G710
  For canceling the display demonstration, see page 8.
  Para cancelar la demostración en pantalla, consulte la página 8.
  Pour annuler la démonstration des affichages, référez-vous à la page 8.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au...

2
ENGLISH
  How to forcibly eject a disc
If a disc cannot be recognized by the 
receiver or cannot be ejected, ejects the disc 
as follows.
If this does not work, try to reset your 
receiver.
Thank you for purchasing a JVC product. 
Please read all instructions carefully before operation, to ensure your complete understanding and to 
obtain the best possible performance from the unit.
INFORMATION (For U.S.A.)
This equipment has been tested and found to comply with the limits for a Class B digital device,...

3
ENGLISH
How to reset your unit ...........................   2
How to forcibly eject a disc ...................   2
How to read this manual ........................   4
How to use the MODE button ...............   4
Control panel 
— 
KD-AR760/KD-G710..............  5
Parts identification .................................   5
Remote controller — RM-RK50...  6
Main elements and features ...................   6
Getting started .......................   7
Basic operations .....................................

4
ENGLISH
  How to read this manual
The following methods are used to made the 
explanations simple and easy-to-understand:
  Some related tips and notes are explained in 
“More about this receiver” (see page 30). 
  Button operations are mainly explained with 
the illustrations as follows:
Press briefly.
Press repeatedly.
Press either one.
Press and hold until 
your desired response 
begins.
Press and hold both 
buttons at the same 
time.
The following marks are used to indicate...
  :  Built-in CD...

5
ENGLISH
Control panel — KD-AR760/KD-G710
1  (standby/on attenuator) button
2  DISP (display) button
3  SEL (select) button
4 Control dial
5 Display window
6 
 (angle) button
7 0 (eject) button
8 5 (up) button / +10 button 
 ∞ (down) button / –10 button
9 MODE button
p Remote sensor
    DO NOT expose the remote sensor to 
strong light (direct sunlight or artificial 
lighting).
q SOURCE button
w BAND button
e Reset button
r  EQ (equalizer) button
t  MO (monaural) button
y  SSM (Strong-station Sequential...

6
ENGLISH
Remote controller — RM-RK50
Main elements and features
1   (standby/on/attenuator) button
    Turns on and off the power and also 
attenuates the sound.
2 5 U (up) / D (down) ∞ buttons
  5 U: Changes the FM/AM bands.
  D ∞: Changes the preset stations.
    Changes the folder on the MP3/WMA 
discs.
    While playing an MP3 disc on an 
MP3-compatible CD changer:
    – Changes the disc if pressed briefly.
    – Changes the folder if pressed and held.
    While listening to the SIRIUS radio:...

7
ENGLISH
~ 
Ÿ 
You cannot select some sources if they 
are not ready.
*  Only for KD-AR760.
!    For FM/AM tuner only
  For SIRIUS
® radio only
⁄ 
  Volume level appears.
  Volume level indicator
@  Adjust the sound as you want. 
(See pages 17 – 19.)
To drop the volume in a moment (ATT)
  To restore the sound, 
press it again.
To turn off the power
Getting started
Basic operations
EN06-11_KD-AR760_G710[J]f.indd   710/6/04, 4:15:18 PM 

8
ENGLISH
Canceling the display 
demonstrations
If no operations are done for about 20 seconds, 
display demonstration starts. 
[Initial: DEMO ON] —see page 20.
1 
2 
3 
4
  Finish the procedure.
To activate the display demonstration
In step 3 above...
Setting the clock
1 
2
  Set the hour and minute.
 1 Select “CLOCK HOUR,” then 
adjust the hour.
 2 Select “CLOCK MINUTE,” then 
adjust the minute.
3  Finish the procedure.
To check the current clock time when the 
power is turned off...

9
ENGLISH
To tune in to a station manually
In step Ÿ on the left...
1 
2 Select the desired station frequencies.
When an FM stereo broadcast is hard to 
receive
1 
2 
  Lights up when monaural mode is activated.
Reception improves, but stereo effect will 
be lost.
To restore the stereo effect, repeat the same 
procedure so that the MO indicator goes off.
Radio operations
Listening to the radio
~ 
Ÿ 
  Selected band appears.
Lights up when receiving an FM stereo 
broadcast with sufficient signal...

10
ENGLISH
2 
3 
4 Preset number flashes 
for a while.
Listening to a preset station
1 
2 
3  Select the preset station (1 – 6) you 
want.
 or
Storing stations in memory
You can preset six stations for each band.
  FM station automatic presetting —
SSM (Strong-station Sequential 
Memory)
1
 
2  Select the FM band (FM1 – FM3) 
you want to store into.
3 
4 
“SSM” appears, then disappears when 
automatic presetting is over.
Local FM stations with the strongest signals are 
searched and stored automatically...