JVC Kd-s27 Owners Manual
Here you can view all the pages of manual JVC Kd-s27 Owners Manual. The JVC manuals for Car Stereo System are available online for free. You can easily download all the documents as PDF.
Page 1
![Page 1
1 – EN
KD-S27
CD RECEIVER : INSTRUCTIONS/INSTALLATION
0710DTSMDTJEIN
EN
© 2010 Victor Company of Japan, LimitedGET0698-001A
[J]
1 Turn on the power.
2
3
Canceling the display demonstration
4 Select .
5
6 Finish the procedure.
Setting the clock
1 Turn on the power.
2
3 Select .
4 Select .
5 Adjust the hour.
6 Adjust the minute.
7 Finish the procedure.
Preparations
For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving...](http://img.usermanuals.tech/thumb/40/103890/w300_d_1515163394-jvc-kd-s27-owners-manual_d-0.png "Page 1
1 – EN
KD-S27
CD RECEIVER : INSTRUCTIONS/INSTALLATION
0710DTSMDTJEIN
EN
© 2010 Victor Company of Japan, LimitedGET0698-001A
[J]
1 Turn on the power.
2
3
Canceling the display demonstration
4 Select .
5
6 Finish the procedure.
Setting the clock
1 Turn on the power.
2
3 Select .
4 Select .
5 Adjust the hour.
6 Adjust the minute.
7 Finish the procedure.
Preparations
For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving...")
1 – EN KD-S27 CD RECEIVER : INSTRUCTIONS/INSTALLATION 0710DTSMDTJEIN EN © 2010 Victor Company of Japan, LimitedGET0698-001A [J] 1 Turn on the power. 2 3 Canceling the display demonstration 4 Select . 5 6 Finish the procedure. Setting the clock 1 Turn on the power. 2 3 Select . 4 Select . 5 Adjust the hour. 6 Adjust the minute. 7 Finish the procedure. Preparations For safety... • Do not raise the volume level too much, as this will block outside sounds, making driving...
Page 2
![Page 2
2 – EN
Listening to the radio
~
] “FM” or “AM”
Ÿ
“ST” lights up when receiving an FM stereo broadcast with
sufficient signal strength.
Manual search
“M” flashes, then press the
button repeatedly.
When an FM stereo broadcast is hard
to receive
1
2
] ] ]
Reception improves, but stereo effect will be
lost.
To restore the stereo effect, repeat the same
procedure to select .
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a...](http://img.usermanuals.tech/thumb/40/103890/w300_d_1515163394-jvc-kd-s27-owners-manual_d-1.png "Page 2
2 – EN
Listening to the radio
~
] “FM” or “AM”
Ÿ
“ST” lights up when receiving an FM stereo broadcast with
sufficient signal strength.
Manual search
“M” flashes, then press the
button repeatedly.
When an FM stereo broadcast is hard
to receive
1
2
] ] ]
Reception improves, but stereo effect will be
lost.
To restore the stereo effect, repeat the same
procedure to select .
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a...")
2 – EN Listening to the radio ~ ] “FM” or “AM” Ÿ “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength. Manual search “M” flashes, then press the button repeatedly. When an FM stereo broadcast is hard to receive 1 2 ] ] ] Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure to select . Automatic presetting (FM)— SSM (Strong-station Sequential Memory) You can preset up to 18 stations for FM. While listening to a...
Page 3
![Page 3
3 – EN
123Repeat step 2 if necessary.
• To return to the previous menu, press BACK.
• To exit from the menu, press DISP or MENU.
Category Menu itemSelectable setting, [Initial: Underlined]
DEMO
DEMO• DEMO ON
• DEMO OFF: Display demonstration will be activated automatically if
no operation is done for about 20 seconds.
: Cancels.
CLOCK
CLOCK SET[ 1:00 ] : Adjust the hour, then the minute.
PRO EQ
BASS— : For settings, see “Storing your own sound mode.”
MIDDLE
TREBLE
DISPLAY
DIMMER• DIMMER ON
• DIMMER...](http://img.usermanuals.tech/thumb/40/103890/w300_d_1515163394-jvc-kd-s27-owners-manual_d-2.png "Page 3
3 – EN
123Repeat step 2 if necessary.
• To return to the previous menu, press BACK.
• To exit from the menu, press DISP or MENU.
Category Menu itemSelectable setting, [Initial: Underlined]
DEMO
DEMO• DEMO ON
• DEMO OFF: Display demonstration will be activated automatically if
no operation is done for about 20 seconds.
: Cancels.
CLOCK
CLOCK SET[ 1:00 ] : Adjust the hour, then the minute.
PRO EQ
BASS— : For settings, see “Storing your own sound mode.”
MIDDLE
TREBLE
DISPLAY
DIMMER• DIMMER ON
• DIMMER...")
3 – EN 123Repeat step 2 if necessary. • To return to the previous menu, press BACK. • To exit from the menu, press DISP or MENU. Category Menu itemSelectable setting, [Initial: Underlined] DEMO DEMO• DEMO ON • DEMO OFF: Display demonstration will be activated automatically if no operation is done for about 20 seconds. : Cancels. CLOCK CLOCK SET[ 1:00 ] : Adjust the hour, then the minute. PRO EQ BASS— : For settings, see “Storing your own sound mode.” MIDDLE TREBLE DISPLAY DIMMER• DIMMER ON • DIMMER...
Page 4
4 – EN Troubleshooting Symptom Remedy/Cause General Sound cannot be heard from the speakers.• Adjust the volume to the optimum level. • Make sure the unit is not muted/paused. (See page 1.) • Check the cords and connections. “PROTECT” appears on the display and no operations can be done.Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit. (See page 1.) If “PROTECT” does not disappear, consult your JVC car audio dealer or a company...
Page 5
5 – EN
Specifications
AUDIO AMPLIFIER SECTION
Power Output:
20 W RMS × 4 Channels at 4 Ω and
≤ 1% THD+N
Signal-to-Noise Ratio:
80 dBA (reference: 1 W into 4 Ω)
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Bass: ±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)
Q1.0, Q1.25, Q1.5, Q2.0
Middle: ±12 dB (0.5 kHz, 1.0 kHz, 1.5 kHz,
2.5 kHz)
Q0.75, Q1.0, Q1.25
Treble: ±12 dB (10.0 kHz, 12.5 kHz, 15.0 kHz,
17.5 kHz)
Q (Fixed)
Frequency Response: 40 Hz to 20 000 Hz
Line-Out...
Page 6
6 – EN Installation The following illustration shows a typical installation. If you are not sure how to install this unit correctly, contact your JVC car audio dealer or a company supplying kits. See “Electrical connections” below. Removing the unit Release the rear section first... 8 mm (3/8") Bracket * 2 PocketFlat head screws—M5 × 8 mm (3/8") *2 When installing the unit without using the sleeve In a Toyota car for example, first remove the car radio and install the unit in its place....