Home > JVC > Video Recorder > JVC Hr-j770 Manual

JVC Hr-j770 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual JVC Hr-j770 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Filename [HR-J770EU3.fm]
    Masterpage:Right
    EN 51
    RECORDING
    TIMER RECORDING 
    SYMPTOMPOSSIBLE CAUSECORRECTIVE ACTION
    1. Recording cannot be started.●
    There is no cassette loaded, or the 
    cassette loaded has had its record safety 
    tab removed.Insert a cassette, or using adhesive tape, 
    reseal the slot where the tab was removed.
    2. TV broadcasts cannot be recorded.●
    “L-1”, “L-2”, “F-1” or “SAT” has been 
    selected as the input mode.Set to the desired channel.
    3. Tape-to-tape editing is not possible.●
    The source (another video recorder, 
    camcorder) has not been properly 
    connected.Confirm that the source is properly 
    connected.
    ●
    All necessary power switches have not 
    been turned on.Confirm that all units’ power switches are 
    turned on.
    ●
    The input mode is not correct. Set the input mode to “L-1”, “L-2” or 
    “F-1”.
    4. Camcorder recording is not possible.●
    The camcorder has not been properly 
    connected.Confirm that the camcorder is properly 
    connected.
    ●
    The input mode is not correct. Set the input mode to “L-1”, “L-2” or 
    “F-1”.
    SYMPTOMPOSSIBLE CAUSECORRECTIVE ACTION
    1. Timer recording won’t work.●
    The clock and/or the timer have been set 
    incorrectly.Re-perform the clock and/or timer 
    settings.
    ●
    The timer is not engaged. Press 
    # and confirm that “#” is 
    displayed on the front display panel.
    2. Timer programming is not possible.●
    Timer recording is in progress. Timer programming can’t be performed 
    while a timer recording is in progress. 
    Wait until it finishes.
    3. “
    #” and “[” on the front display 
    panel won’t stop blinking.●
    The timer is engaged but there’s no 
    cassette loaded.Load a cassette with the record safety tab 
    intact, or cover the hole using adhesive 
    tape.
    4. The cassette is automatically ejected, 
    and “
    #” and “[” on the front 
    display panel won’t stop blinking.●
    The loaded cassette has had its record 
    safety tab removed.Remove the cassette and cover the hole 
    with adhesive tape, or insert a cassette 
    with the record safety tab intact.
    5. “
    #” blinks for 10 seconds and the 
    Timer mode is disengaged.●# has been pressed when there are no 
    programs in memory, or the timer 
    record information has been 
    programmed incorrectly.Check the programmed data and re-
    program as necessary, then press # again.
    6. The cassette is automatically ejected, 
    the power shuts off and “
    #” and 
    “[” won’t stop blinking.●
    The end of the tape was reached during 
    timer recording.The programme may not have been 
    recorded in its entirety. Next time make 
    sure you have enough time on the tape to 
    record the entire programme.
    7. The S
    HOWVIEW system does not timer-
    record properly.●
    The recorder’s channel positions have 
    been set incorrectly.Refer to “Guide Program Number Set” 
    (pg. 47) and re-perform the procedure.
    HRJ670EU3.fm  Page 51  Thursday, January 13, 2000  2:25 PM 
    						
    							Filename [HR-J770EU3.fm]
    Masterpage:Left
    52 ENTROUBLESHOOTING (cont.)
    OTHER PROBLEMS
    SYMPTOMPOSSIBLE CAUSECORRECTIVE ACTION
    1. Whistling or howling is heard from the 
    TV during camcorder recording.●The camcorder’s microphone is too 
    close to the TV.Position the camcorder so its microphone 
    is away from the TV.
    ●The TV’s volume is too high. Turn the TV’s volume down.
    2. When scanning channels, some of 
    them are skipped over.●Those channels have been designated to 
    be skipped.If you need the skipped channels, restore 
    them (
    pg. 42).
    3. The channel cannot be changed.●Recording is in progress. Press 
    9 to pause the recording, change 
    channels, then press 4 to resume 
    recording.
    4. Channel settings that were made 
    manually seem to have changed or 
    disappeared.●After the manual settings were made, 
    Auto Channel Set was performed.Perform manual setting again.
    5. No channels are stored in the 
    recorder’s memory.●The TV aerial cable was not connected 
    to the recorder when Auto Set Up was 
    performed.Connect the TV aerial cable to the 
    recorder properly and turn off the recorder 
    power once, then turn the recorder power 
    back on again. The recorder will try Auto 
    Set Up again (
    pg. 8).
    AT T E N T I O N
    This recorder contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch 
    the recorder off and unplug the mains power cord. Then plug it in again and turn the recorder on. Take out the cassette. After 
    checking the cassette, operate the unit as usual.
    HRJ670EU3.fm  Page 52  Friday, February 11, 2000  4:57 PM 
    						
    							Filename [HR-J770EU3.fm]
    Masterpage:Right
    EN 53QUESTIONS AND ANSWERS
    PLAYBACK
    Q. What happens if the end of the tape is reached  
    during playback or search?
    A.The tape is automatically rewound to the 
    beginning.
    Q. During search, slow, still and frame-by-frame 
    playback, I can’t hear any audio. What’s the 
    problem?
    A.This is normal.
    Q. Can the video recorder indefinitely remain in 
    the still mode?
    A.No. It stops automatically after 5 minutes to 
    protect the heads.
    Q. When returning from variable-speed search to 
    normal playback, the picture is disturbed. 
    Should I be concerned about this?
    A.No, it is normal.
    Q. Noise bar appear during variable-speed search. 
    What’s the problem?
    A.This is normal.
    Q. Sometimes, during Index Search, the video 
    recorder can’t find the programme I want to 
    see. Why not?
    A.There may be index codes too close together.
    RECORDING
    Q. When I pause and then resume a recording, the 
    end of the recording before the pause is 
    overlapped by the beginning of the 
    continuation of recording. Why does this 
    happen?
    A.This is normal. It reduces distortion at the pause 
    and resume points.
    Q. Can the video recorder indefinitely remain in 
    the Record-Pause mode?
    A.No. The video recorder goes to its Stop mode 
    automatically after 5 minutes to protect the 
    heads.
    Q. What happens if the tape runs out during 
    recording?
    A.The video recorder automatically rewinds it to 
    the beginning.
    TIMER RECORDING
    Q. “o” and “#” remain lit on the front display 
    panel. Is there a problem?
    A.No. This is a normal condition for a timer 
    recording in progress.
    Q. Can I programme the timer while I’m watching 
    a tape or a TV broadcast?
    A.You won’t see the picture as it is replaced by the 
    on-screen menu, but the audio from the 
    programme or tape you’re viewing can be 
    heard.
    HRJ670EU3.fm  Page 53  Thursday, January 13, 2000  2:25 PM 
    						
    							Filename [HR-J770EU3.fm]
    Masterpage:Left
    54 ENSPECIFICATIONS
    GENERAL
    Power requirement : AC 220 V – 240 Vd, 50 Hz/60 Hz
    Power consumption
    Power on : 19 W
    Power off : 4.9 W
    Temperature
    Operating : 5°C to 40°C
    Storage : –20°C to 60°C
    Operating position : Horizontal only
    Dimensions (WxHxD)
    : 400 mm x 94 mm x 281 mm 
    Weight : 3.5 kg
    Format : VHS PAL standard
    Maximum recording time
    (SP) : 240 min. with E-240 video cassette
    (LP) : 480 min. with E-240 video cassette
    VIDEO/AUDIO
    Signal system : PAL-type colour signal and CCIR 
    monochrome signal, 625 lines 50 
    fields
    Recording  system : DA4 (Double Azimuth) head helical 
    scan system
    Signal-to-noise ratio: 45 dB
    Horizontal resolution
    : 250 lines
    Frequency range : 70 Hz to 10,000 Hz (Normal audio)
    20 Hz to 20,000 Hz (Hi-Fi audio)
    Input/Output : 21-pin SCART connectors :
    IN/OUT x 1, IN/DECODER x 1
    RCA connectors:
    VIDEO IN x 1, AUDIO IN x 1, 
    AUDIO OUT x 1
    TUNER/TIMER
    TV channel storage capacity
    : 99 positions (+AUX position)
    Tuning system : Frequency synthesized tuner
    Channel coverage : VHF 47 MHz – 89 MHz/
    104 MHz – 300 MHz/
    302 MHz – 470 MHz
    UHF 470 MHz – 862 MHz
    Aerial output : UHF channels 22 – 69 (Adjustable)
    Memory backup time
    : Approx. 10 min.
    ACCESSORIES
    Provided accessories
    : RF cable, 
    Satellite Controller RM-SD1, 
    Infrared remote control unit,
    “R6” battery x 2
    Specifications shown are for SP mode unless otherwise 
    specified.
    E.& O.E. Design and specifications subject to change without 
    notice.
    HRJ670EU3.fm  Page 54  Thursday, January 13, 2000  2:25 PM 
    						
    							Filename [HR-J770EU1IX.fm]
    Masterpage:Right
    EN 55LIST OF TERMS
    A
    Auto Set Up..........................................................8
    AUTO SP
    ]LP TIMER.........................................38
    AUTO TIMER.....................................................37
    Automatic Satellite Programme Recording..........30
    B
    B.E.S.T. Picture System ................................. 23, 37
    C
    Change Station Channel Position........................ 43
    Check, cancel and change programmes ............. 28
    Clock Set ............................................................ 48
    COLOUR SYSTEM ............................................. 39
    Connecting To A Satellite Receiver..................... 33
    D
    Delete A Channel ............................................... 43
    DIRECT REC ................................................. 15, 37
    E
    EDITING ............................................................ 31
    Elapsed Recording Time Indication .................... 22
    Express Timer Programming ............................... 26
    F
    Fine-Tuning Channels Already Stored................. 44
    G
    Guide Program Number Set ......................... 25, 47
    H
    High-Speed Search ............................................. 17
    I
    Index Search ...................................................... 19
    Instant ReView ................................................... 18
    Instant Timer Recording (ITR) ............................. 21
    J
    Just Clock ........................................................... 48
    L
    L-2 SELECT ......................................................... 39
    Language............................................................ 12
    M
    Manual Channel Set ........................................... 42
    Manual Tracking ................................................ 18
    Mode Set ............................................................ 36
    N
    Next Function Memory ...................................... 19
    O
    O.S.D. ................................................................ 37
    ON-SCREEN DISPLAY .......................................... 5
    P
    PICTURE CONTROL .......................................... 37
    PLAYBACK ......................................................... 16
    POWER SAVE..................................................... 38
    Preset Download ................................................ 10
    R
    Record One Programme While Watching 
    Another .............................................................. 21
    RECORDING...................................................... 20
    Recording Resume Function ............................... 20
    Repeat Playback ................................................. 19
    S
    Satellite Controller .............................................. 13
    Satellite Receiver Control Setting ........................ 13
    Set Stations (A).................................................... 44
    Set Stations (B) .................................................... 44
    S
    HOWVIEW® Setup .............................................. 47
    S
    HOWVIEW® Timer Programming ........................ 24
    Skip Search......................................................... 19
    Slow Motion ....................................................... 17
    Soundtrack Selection .......................................... 19
    Still Picture/Frame-By-Frame Playback ............... 17
    T
    Tape position indicator ......................................... 5
    Tape Remaining Time......................................... 22
    TIMER RECORDING .......................................... 24
    Timer warning display .......................................... 5
    Tuner Set ............................................................ 40
    T-V LINK ............................................................ 15
    TV Station And ID List ........................................ 45
    V
    Variable Speed Search ........................................ 18
    Video Channel Set .............................................. 46
    VPS/PDC Recording ........................................... 27
    W
    When programmes overlap each other ............... 29
    When Receiving A Scrambled Broadcast ............ 43
    HRJ670EU1IX.fm  Page 55  Thursday, January 13, 2000  2:26 PM 
    						
    							Filename [Cov4.fm]
    Printed in Germany
    Printed in GermanyPrinted in Germany Printed in Germany
    0100IYV
    0100IYV0100IYV 0100IYV
    *ID
    IDID ID*JVE
    JVEJVE JVE
    EN
    Auto Set Up — referring to the front display panel
    The Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically. 
    BEFORE YOU START PLEASE MAKE SURE THAT:
    8The TV aerial cable is connected to the ANT.IN connector on the rear panel of the video recorder.8The video recorder’s mains power cord is connected to a mains outlet.
    8The video recorder is turned off.
    8Load batteries into the remote control.
    ●If you have selected a country code other than 32 (BELGIUM) or 41 (SUISSE), go to step 3.
    ●If you have selected 36 (MAGYARORSZÁG), 42 (C
    ESKÁ REPUBLIKA), 48 (POLSKA) or EE (OTHER EASTERN 
    EUROPE), press 
    OK. Clock Set screen will appear. Set the clock manually
     (pg. 48), then go to step 3.
    3Press 
    OK (remote). “Auto” appears on the front display panel.
    4Press 
    OK (remote) to start Auto Set Up. Do NOT press any button on the video recorder or remote control during 
    “Auto” is blinking.
    ●If you have connected the recorder to your TV via the AV connection (
    pg. 7), the recorder will automatically 
    perform Preset Download (
    pg. 10).
    ●If “– –:– –” appears on the display panel, see page 11 of the instructions.
    * Once you have performed Auto Set Up, even if the recorder’s memory backup has expired, the recorder will not 
    perform Auto Set Up again. Perform tuner setting (
    pg. 40) and/or clock setting (pg. 48) as required.
    1Press 1 (recorder/remote).
    2Press rt (remote) to select the international telephone 
    country code.
    (Example) DEUTSCHLAND is selected.
    ●If you have selected 32 (BELGIUM) or 41 (SUISSE), press 
    OK (remote) and select the language code by pressing 
    rt (remote), then go to step 3.
    (Example) FRANCAIS is selected for BELGIUM.
    FOR MORE INFORMATION 
    SEE INSTRUCTIONS (
    pg. 8)
    International Telephone Country Code
    BELGIUM
    CESKÁ REPUBLIKA
    DA N M A R K
    DEUTSCHLAND
    ESPAÑA
    GREECE
    ITALIA
    MAGYARORSZÁG
    NEDERLAND:
    :
    :
    :
    :
    :
    :
    :
    :32
    42
    45
    49
    34
    30
    39
    36
    31NORGE
    ÖSTERREICH
    POLSKA
    PORTUGAL
    SUISSE
    SUOMI
    SVERIGE
    OTHER WESTERN EUROPE
    OTHER EASTERN EUROPE
    :
    :
    :
    :
    :
    :
    :
    :
    :47
    43
    48
    351
    41
    358
    46
    – –
    EE
    International Telephone 
    Country CodeLanguage Code
    Language Code
    ENGLISH
    DEUTSCH
    FRANCAIS
    ITALIANO
    CASTELLANO
    NEDERLANDS
    SVENSKA:
    :
    :
    :
    :
    :
    :01
    02
    03
    04
    05
    06
    07NORSK
    SUOMI
    DA N S K
    POLSKI
    CE
    cTINA
    MAGYAR:
    :
    :
    :
    :
    :08
    09
    10
    11
    12
    13
    Cov4.fm  Page 1  Thursday, January 13, 2000  2:26 PM 
    						
    All JVC manuals Comments (0)