JVC Hm 100 U Manual

67
MENU SCREENS
ADVANCED PROCESS Menu Screen
Item Function/Setting (bold characters indicate initial settings)
CINELIKEOFF: Turns the function OFF. 
ON : Sets the gamma characteristics and color matrix close to the characteristics of a movie
screen. (The monitor image is movie-quality. This setting is not intended for film output)
MEMO
When this item is set to “ON”, “[CINE]” is displayed for COLOR MATRIX and GAMMA items and cannot be
selected. 
COLOR MATRIX Sets the color matrix. 
OFF : Turns the...

68
MENU SCREENS
COLOR MATRIX ADJUST Menu Screen
SKIN COLOR ADJUST Menu Screen
When you enter the SKIN COLOR ADJUST screen, the areas where the skin detail function is applied are displayed in color, and
other areas are displayed in black and white.Item Function/Setting (bold characters indicate initial settings)
R GAIN For manually adjusting the shading of the R axis of the color matrix (red and cyan).
Increase the number : Enhances red and cyan.
Decrease the number : Reduces red and cyan.
[Settings: MIN...

69
MENU SCREENS
SWITCH MODE Menu Screen
The SWITCH MODE menu screen is only displayed in camera mode. 
Item Function/Setting (bold characters indicate initial settings)
SHUTTER Sets the fixed value (STEP) for values that can change using the SHUTTER dial on the right panel or the VARIABLE
used when shooting computer monitors. 
STEP: Switches the shutter speed using fixed values. 
VARIABLE : Set when shooting a computer monitor, etc. 
You can set the following using the REC item on the VIDEO FORMAT menu...

70
MENU SCREENS
AUDIO/MIC Menu Screen
In VTR mode, the screen changes to the AUDIO menu screen.
* This is not displayed in VTR mode.
Item Function/Setting (bold characters indicate initial settings)
TEST TONE Sets whether to output a test audio signal (1kHz, –20dBFS or –12dBFS) during color bar output. 
OFF: A test audio signal is not output. 
ON : A test audio signal is output. 
MIC WIND CUT* Selects whether to cut the lows (low frequency bands) from the audio input signal. 
Use this when you want to...

71
MENU SCREENS
LCD/VF [1/3] Menu Screen
The LCD/VF menu screen consists of three screens. (1/3 screen, 2/3 screen, 3/3 screen)
The LCD/VF [1/3] menu screen can only be set in camera mode. 
In VTR mode, this screen consists of two screens. (1/2 screen, 2/2 screen)
*1 SAFTY ZONE and CENTER MARK will not be displayed when the camcorder is in VTR mode (PLAY, STL, FWD, REV). Item Function/Setting (bold characters indicate initial settings)
ZEBRA Switches the luminance level of the subject sections where the...

72
MENU SCREENS
LCD/VF [2/3] Menu Screen
[1/2] screen is displayed in the VTR mode.
Item Function/Setting (bold characters indicate initial settings)
VIDEO FORMAT Selects whether to display the video format in the status display on the LCD monitor or the viewfinder. 
(Camera mode: STATUS 1 screen, VTR mode: STATUS screen)
ON: Displays the video format.
OFF : Does not display the video format. 
In camera mode : Displays the video format set in the REC item on the VIDEO FORMAT menu screen.
In VTR mode :...

73
MENU SCREENS
LCD/VF [3/3] Menu Screen
[2/2] screen is displayed in the VTR mode.
Item Function/Setting (bold characters indicate initial settings)
LCD CONTRAST Adjusts the contrast of the LCD. 
[Settings: MIN (–5), –4 - NORMAL (0) - 4, MAX (5)]
VF CONTRAST Adjusts the contrast of the viewfinder. 
[Settings: MIN (–5), –4 - NORMAL (0) - 4, MAX (5)]
PAGE BACK Camera mode:
When the cursor is in this position, press the SHUTTER dial to return to the LCD/VF [2/3] menu screen. 
VTR mode:
When the cursor is...

74
MENU SCREENS
TC/UB/CLOCK Menu Screen
Time codes (TC) and user’s bits (UB) can be set on this screen. Date and time is set on the TIME/DATE screen that can be
reached from this screen.
*1 This can be displayed and selected when 60/30 is set for the FRAME RATE item on the VIDEO FORMAT menu screen. 
When 24 is set, this is fixed at “NON DROP” and “[NON DROP]” is displayed.
*2 This can be displayed and selected when 50/25 is set for the FRAME RATE item on the VIDEO FORMAT menu screen. Item...

75
MENU SCREENS
HEADER REC Menu Screen
The HEADER REC menu screen is used for settings related to the HEADER REC function. (XSeepage50.)
Item Function/Setting (bold characters indicate initial settings)
START KEY Sets whether the HEADER REC operation should be executed when the REC/VTR trigger button is pressed while
the STOP button is pressed.
DISABLE: HEADER REC operation is not executed.
STOP+REC : HEADER REC operation is executed.
TC DATA Sets the time code value for the point when the Record-Standby...

76
MENU SCREENS
TIME/DATE Menu Screen
Item Function/Setting (bold characters indicate initial settings)
DISPLAY Sets whether the date and time are shown in the status display on the LCD monitor or in the viewfinder.
OFF: Not displayed.
ON : Displayed.
When a tape with time and date not recorded is played back, there will be no display of time and date even when
this item is set to ON.
DISPLAY MODE In the Camera mode, the date and time are displayed in accordance with the following settings.
The date and...