JVC Gze15bek User Guide

Verifying the Accessories
If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center.IllustrationDescription
.
AC Adapter
AC-V10M
0 Connects to this unit to charge the battery pack.
It can also be used when recording or playing back videos indoors.
.
Power Cord
.
Battery Pack
BN-VG108E
0 Attaches to this unit to supply power.
.
AV Cable
0 Connects this unit to a TV to play back recorded images on the TV.
.
USB Cable
(Type A - Mini Type B)
0 Connects this unit...

Charging the Battery Pack
Charge the battery pack immediately after purchase and when the remaining
battery power is low.
The battery pack is not charged at the time of purchase.1 Attach the battery pack.
.
0Align the top of the battery with the mark on this unit, and slide in until
the battery clicks into place.
2 Connect the AC adapter to the DC connector.
.
3Plug in the power.
.
0The charging lamp blinks when charging is in progress.
It goes out when charging is finished.
Caution : Be sure to use JVC...

Detaching the Battery Pack
.
0Slide the battery release lever to detach the battery from this unit.
Approximate Battery Charging Time (Using AC Adapter)
Battery PackCharging TimeBN-VG108E
(Supplied)2 h 20 mBN-VG114E2 h 30 mBN-VG121E3 h 30 mBN-VG138E6 h 10 m
0 When the battery life is reached, the recording time becomes shorter even
if the battery pack is fully charged.
(Replace the battery pack with a new one.)
* The charging time is when the unit is used at 25°C. If the battery pack is charged outside...

Inserting an SD Card
Insert a commercially available SD card before recording.
“Types of Usable SD Card” ( A p. 14)
“Approximate Video Recording Time” ( A p. 34)1
Close the LCD monitor.
.
2Open the cover.
.
3Insert an SD card.
.
0Insert with the label facing outward.
Warning
0Make sure not to insert the SD card in the wrong direction.
It may cause damage to the unit and SD card.
0 Turn off the power of this unit before inserting or removing an SD card.
0 Do not touch the metal contact area when inserting...

0This unit is not guaranteed to operate with all SD cards, even when using
the ones specified above. Some SD cards may not work due to
specification changes, etc.
0 To record videos with “VIDEO QUALITY” set to “UXP”, use of a Class 6 or
higher compliant SDHC/SDXC card is recommended.
0 Class 4 and Class 6 are guaranteed to have a minimum transfer rate of 4
MB/s and 6 MB/s respectively during reading or writing of data.
0 You can also use a Class 10 compliant SDHC/SDXC card.
0 To protect the data, do not...

Clock Setting
The “SET DATE/TIME!” screen appears when you turn on this unit for the
first time after purchase, when it has not been used for a long time, or when the clock is not set yet.
Set the clock before recording.Memo : To select/move cursor towards up/left or down/right, press the button UP/<
or DOWN/>.
.1Open the LCD monitor.
.
0The unit turns on.
0 When the LCD monitor is closed, the unit turns off.
2 Select “YES” and press OK when “SET DATE/TIME!” is displayed.
.
3Set the date and time.
....

Resetting the Clock
Set the clock with “CLOCK ADJUST” from the menu.
Memo : To select/move cursor towards up/left or down/right, press the button UP/<
or DOWN/>.
.1Press MENU.
.
2Select “CLOCK ADJUST” and press OK.
.
0Press UP/< or DOWN/> to move the cursor.
0 To cancel and return to the previous screen, press MENU.
3 Select “CLOCK SETTING” and press OK.
.
0Press UP/< or DOWN/> to move the cursor.
0 To cancel and return to the previous screen, press MENU.
4 Set the date and time.
.
0Press UP/< or DOWN/>...

Changing the Display Language
The language on the display can be changed.Memo : To select/move cursor towards up/left or down/right, press the button UP/<
or DOWN/>.
.1Press MENU.
.
2Select “DISPLAY SETTINGS” and press OK.
.
0Press UP/< or DOWN/> to move the cursor.
0 To cancel and return to the previous screen, press MENU.
3 Select “LANGUAGE” and press OK.
.
0Press UP/< or DOWN/> to move the cursor.
0 To cancel and return to the previous screen, press MENU.
4 Select the desired language and press OK.
....

Using this Unit Overseas
The shape of the power outlet varies according to countries and regions.
To charge the battery pack, you need a converter plug that matches the
shape of the outlet.
“Charging the Battery Pack Overseas” ( A p. 19)
Change the date and time display to the local time by selecting your travel
destination in “AREA SETTING” of “CLOCK ADJUST”.
“Setting the Clock to Local Time when Traveling” ( A p. 19)
When “ON” is selected in “DST SETTING” of “CLOCK ADJUST”, the time is
set 1 hour...

Setting Daylight Saving Time
When “ON” is selected in “DST SETTING” of “CLOCK ADJUST”, the time is
set 1 hour ahead.
Memo : To select/move cursor towards up/left or down/right, press the button UP/<
or DOWN/>.
.1Press MENU.
.
2Select “CLOCK ADJUST” and press OK.
.
0Press UP/< or DOWN/> to move the cursor.
0 To cancel and return to the previous screen, press MENU.
3 Select “DST SETTING” and press OK.
.
0Press UP/< or DOWN/> to move the cursor.
0 To cancel and return to the previous screen, press MENU.
4...