JVC Gd 42x1 Instructions
Have a look at the manual JVC Gd 42x1 Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Set up the monitor for your PC Selecting the input signal When you connect a PC to the INPUT-4 terminal, set the type of the input signal accordingly. ● For signals in VGA60 and XGA60 Set “Sampling Mode” to “Std”. (➔ page 34) ● For signals in WVGA60 Set “Sampling Mode” to “Wide”. (➔ page 34) ● For signals in WXGA (1280), WXGA (1360) and WXGA60 1 Set “Sampling Mode” to “Wide”. (➔ page 34) 2 Set “WXGA Select” as follows. (➔ page 34) ● For signals in WXGA (1280): “1280*768” ● For signals in WXGA (1360): “1360*768” ● For signals in WXGA60: “1366*768” ● For signals in SXGA60 Set “SXGA / SXGA+” to “SXGA”. (➔ page 34) ● For signals in SXGA+60 Set “SXGA / SXGA+” to “SXGA+”. (➔ page 34) A-10 (%9@JOTU@VTJOEC(%9@JOTU@VTJOEC..
Enjoy SLR digital camera photographs When you select the picture preset of “Photo Pro” in “ Memory Setting ”, you can view the photographs just the way they were taken. If the picture is not aligned vertically, or letters on the screen look blurred Set the aspect to “1:1”, and adjust “Dot Clock” and “Clock Phase”. (➔ page 35) ● For signals in 1920 x 1080, set the aspect to “Full” and adjust the same items. If the picture is cropped, or extra margins are displayed around it 1 Set the aspect to “Full”. 2 Adjust the position of the picture using “PC Position Adjustment” until the upper left corner of the picture is positioned at the upper left corner of the display. 3 Adjust the size of the picture using “H Size” and “V Size” until the bottom right corner of the picture is positioned at the bottom right corner of the display. For JPEG pictures, select “sRGB” or “AdobeRGB” under the setting of “Color Space” (➔ page 20) according to the setting of your camera, so that the photographs are displayed more faithfully to the original. ● It is recommended not to modify the settings of “Photo Pro”. In the initial setting of “Photo Pro”, “Color Space” is set to “sRGB”. A-11 Set up the monitor for your PC (%9@JOTU@VTJOEC(%9@JOTU@VTJOEC..
Menu index by taskPage Hue adjustment General tone of color Tint 16 Tone of color (including white) Color Temperature 21 Tone of color (in detail) White Balance Setting 21 Range of color representation Color Space 20 Amplitude of the color difference signal Tint Setting › BY Gain16 Demodulation angle of the color difference signalTint Setting › BY/RY Angle16 Pattern of color correction Color Management 22 Color correction (in detail) Color Mngmt. Setting › Red Tint, Yellow Tint, etc.22 Color adjustment Total density of color Color 16 Amplitude of the color difference signal Tint Setting › BY Gain16 Demodulation angle of the color difference signalTint Setting › BY/RY Angle16 Pattern of color correction Color Management 22 Color correction (in detail) Color Mngmt. Setting › Red Color, Yellow Color, etc.22 Brightness (backlight) Total brightness of pictures Backlight 18 Reduces backlight in bright scenes Backlight Setting › Smart Picture19 Reduces backlight in dark scenes Backlight Setting › Dynamic Backlight19 Adjusts backlight depending on the luminance of the roomEco Mode 26 Brightness (signal) Total brightness of pictures Brightness 17 Adjusts the gain of the signal level Contrast 17 Emphasizes darker areas automatically Contrast Setting › Black Stretch17 Reduces brightness in bright scenes Contrast Setting › Dynamic DC Offset17 Emphasizes bright areas automatically Contrast Setting › Auto Contrast17 Gamma correction value Gamma 23 Adjusts gamma value automatically Dynamic Gamma 23 Sharpness Sharpness Sharpness 18 Sharpness (in detail) Enhancer Setting 18 Frequency band to enhance Enhancer 18 Sound Bass sound Bass 27 Treble sound Treble 27 Equalizer suited for the speakers PEQ 28 Adjusts the delay time of sound Lip Sync 27 A-12 (%9@JOTU@VTJOEC(%9@JOTU@VTJOEC..
15 Changing the settings : Picture Picture Memory Setting You can store up to 6 sets of the “Picture” settings and use them. ● When the input is changed, the memory used for the input last time is automatically applied. ■ Memory1 / Memory2 / Memory3 / Memory4 / Memory5 / Memory6 Load Preset You can load one of the presets below into a memory. You can do further adjustment based on the loaded settings. ● Select a preset and press “Load” to load a preset. ■ Signage : Suitable for digital signage use in market, shops or hotels. ■ CCTV HD : Suitable for monitoring CCTVs in HD format. ■ CCTV SD : Suitable for monitoring CCTVs in SD format. ■ Photo Pro : Suitable for watching still pictures. ■ Option : Suitable for displaying medical images including x-ray pictures. ● This setting is only for approximate presentation and does not conform to any official standard of medical imaging. ■ Standard : The most standard setting. (%9@JOTU@VTJOEC(%9@JOTU@VTJOEC..
16 Tint Adjusts the tone of color. ■ –30 – +30 (Skin color reddish ↔ Skin color greenish) Tint Setting Adjusts the tone of color in detail. ● The setting is fixed to 0 and unadjustable when “Color Space” is set to “sRGB”, “AdobeRGB”, or “x.v.Color”. ● The setting is fixed to 0 and unadjustable when “Color Space” is set to “Auto” and the xvYCC signal is input to the HDMI terminal. ● The setting is fixed to 0 and unadjustable when “PC Monitor Mode” is set to “On”. ◆ BY Gain Adjusts the amplitude of the B-Y color difference signal. You can modify the total coloring of the picture. ■ –30 – +30 (Small amplitude ↔ Large amplitude) ◆ BY/RY Angle Adjusts the demodulation angle between the B-Y color difference signal and the R-Y color difference signal. You can modify the total coloring of the picture. ■ –15 – +15 (Decreasing the angle ↔ Increasing the angle) Color Adjusts the density of color. ■ –30 – +30 (Dilute ↔ Dense) (%9@JOTU@VTJOEC(%9@JOTU@VTJOEC..
17 Changing the settings : Picture Contrast Adjusts the brightness of brighter areas of pictures. ■ –30 – +30 (Dark ↔ Bright) Contrast Setting Adjusts settings of functions relating with contrast. ● The functions are not available when “Color Space” is set to “sRGB” or “AdobeRGB”. ● The functions are not available when “PC Monitor Mode” is set to “On”. ◆ Black Stretch Emphasizes darker areas depending on the characteristics of a picture to make contrast clearer. ■ High / Medium / Low / Off ◆ Dynamic DC Offset Controls the blackness of the picture automatically depending on the total brightness. ■ On / Off ◆ Auto Contrast Emphasizes brighter areas depending on the characteristics of a picture to make contrast clearer. ■ On / Off Brightness Adjusts blackness. ■ –30 – +30 (Dark ↔ Bright) (%9@JOTU@VTJOEC(%9@JOTU@VTJOEC..
18 Sharpness Emphasizes outlines on a picture. ● The setting is unadjustable when “Enhancer” is set to “Off”. ■ –30 – +30 (Fuzzy ↔ Sharp) Enhancer Selects the frequency band enhanced by “Sharpness”. ■ Off : Deactivates the function. ■ Mode-1 / Mode-2 / Mode-3 / Mode-4 / Mode-5 (Emphasizes lower frequency band; for low-resolution picture ↔ Emphasizes higher frequency band; for high-resolution picture) Enhancer Setting Adjusts the effects of “Enhancer” in detail. ● All the settings are unadjustable when “Enhancer” is set to “Off”. ◆ Detail Adjusts texture of surface. ■ –15 – +15 (Weaker ↔ Stronger) ◆ H.Sharp Adjusts sharpness of horizontal outlines. ■ –15 – +15 (Weaker ↔ Stronger) ◆ V.Sharp Adjusts sharpness of vertical outlines. ■ –15 – +15 (Weaker ↔ Stronger) Backlight Adjusts the brightness of backlight. ■ –30 – +30 (Darker ↔ Brighter) (%9@JOTU@VTJOEC(%9@JOTU@VTJOEC..
19 Changing the settings : Picture Backlight Setting Adjusts settings of functions relating with backlight. ◆ Smart Picture Reduces the backlight automatically in dazzling scenes. ■ On / Off ◆ Dynamic Backlight Reduces the backlight automatically in dark scenes to represent black deeper. ■ High / Medium / Low / Off Color System Selects the color system for the picture signal which is input to INPUT-4 from composite terminal. ● The setting is adjustable only when “Input-4 Setting” is set to “Composite”. (➔ page 33) ● The setting is unadjustable when “PC Monitor Mode” is set to “On”. ■ Auto : An appropriate color system is automatically applied depending on the type of the input signal. Normally select this. ■ PAL/50 : When the color system is PAL. ■ PAL/60 : When the color system is PAL 60. ■ SECAM : When the color system is SECAM. ■ NTSC3.58 : When the color system is NTSC 3.58. ■ NTSC4.43 : When the color system is NTSC 4.43. ■ PAL M : When the color system is PAL-M. ■ PAL N : When the color system is PAL-N. (%9@JOTU@VTJOEC(%9@JOTU@VTJOEC..
20 Color Matrix Selects the color matrix used for color conversion. ● The setting is fixed to “Auto” and unadjustable when “Color Space” is set to “sRGB”, “AdobeRGB”, or “x.v.Color”. ● The setting is fixed to “Auto” and unadjustable when ”PC Monitor Mode” is set to “On”. ● The setting is fixed to “Auto” and unadjustable when “Color Space” is set to “Auto” and the xvYCC signal is input to the HDMI terminal. ■ Auto : An appropriate color matrix is applied automatically. ■ 709 : The color matrix conforming ITU-R BT.709 is used for conversion. ■ 601 : The color matrix conforming ITU-R BT.601 is used for conversion. Color Space Changes the range of color representation. ● “sRGB” or “AdobeRGB” is selectable when “PC Monitor Mode” is set to “On”. ● Even when “Auto” is selected, the setting may not switch to “x.v.Color” automatically depending on the connected device or the connection status. ■ Auto : Normally applies “Wide”. When the xvYCC signal is input to the HDMI terminal, “x.v.Color” is applied automatically. ■ Normal : HDTV standard. ■ Wide : The wide color gamut of the equipped LCD panel. (Wider than the HDTV standard.) ■ x.v.Color : Color representation suitable for x.v.Color. ■ sRGB : Color representation suitable for sRGB. ■ AdobeRGB : Color representation suitable for AdobeRGB. (%9@JOTU@VTJOEC(%9@JOTU@VTJOEC..
21 Changing the settings : Picture Color Temperature Adjusts color temperature (color tone). A picture becomes more bluish as color temperature becomes higher. ● The setting is fixed to “Mode-5” and unadjustable when “Color Space” is set to “sRGB” or “AdobeRGB”. ● The setting is fixed to “Mode-5” and unadjustable when “PC Monitor Mode” is set to “On”. ■ Mode-1 : Significantly reddish setting intended for special usages in television studios. ■ Mode-2 : Bluish high color temperature. ■ Mode-3 : Less bluish than “Mode-2”. ■ Mode-4 : For special purposes including medical imaging. ■ Mode-5 : Standard setting. White Balance Setting Adjusts color temperature in detail; subtle control of RGB gradations. ● These settings are independent of the setting of “Color Temperature”. ◆ R Drive / G Drive / B Drive Adjusts the depth of R/G/B on bright areas. ■ –30 – +30 (Dilute ↔ Dense) ◆ R Cutoff / G Cutoff / B Cutoff Adjusts the depth of R/G/B on dark areas. ■ –30 – +30 (Dilute ↔ Dense) (%9@JOTU@VTJOEC(%9@JOTU@VTJOEC..