JVC Gd 42x1 Instructions

04
Installation
Included items
● Main unit (monitor and stand)
● Speaker unit
● Screws for the speaker unit
● Remote control unit
● AAA size batteries
● Video cable (D-sub 15 pin / RCA)
● Audio cable (3.5 mm stereo mini / RCA)
● Power  cable
● Instructions (this book), startup sheet, other printed material
(%9@JOTU@VTJOEC


(%9@JOTU@VTJOEC






.



.
 

05
Installation
 Inserting batteries into the remote control
When replacing the batteries
To avoid short-circuit, place the minus 
end of the batteries first.
● Batteries shall not be exposed to excessive heat such as direct sunshine, fire or 
the like.
● Read the precautions on the battery.
● The batteries last about 6 to 12 months on regular usage.
● The included batteries are supplied for operation check and may last shorter.
 Attaching and connecting the speaker unit
Attach the supplied speaker unit...

06
To adjust the vertical position of monitor
The monitor is height-adjustable in 3 positions, by 5.5 cm (2 1/4’’) at the 
maximum. Adjust the vertical position of the monitor when you need to 
place a device under the monitor.
1  Detach the monitor from the stand.
1-1  Spread a soft cloth on a flat table or floor to place the removed 
monitor on.
2  Change the position of the hooks.
2-1  Detach the two hooks from the monitor. 1-2  Remove the screw connecting 
the monitor and the stand.1-3  Detach the...

07
Installation
2-2  Attach the hooks again.
● Select the positions of the hooks according to the monitor position you want, 
and fix them with the screws.
Speaker unit x √ x √
Tuner x x √ √
3  Attach the monitor to the stand.
3-1  Hang the monitor to the 
stand.
● After hanging the monitor on the 
stand, swing the monitor from 
side to side a few times so that 
the hooks on the monitor and 
the pivots on the stand engage 
properly in position.
3-2  Fasten the screw.
● After fastening the screw, swing...

08
 Connecting external devices
 To connect a computer  To connect a device with a composite terminal  To connect a device with component terminalsTo INPUT-1/INPUT-2/
INPUT-3 terminals
Green
 To connect a DVI device To connect an HDMI device
(%9@JOTU@VTJOEC


(%9@JOTU@VTJOEC






.



.
 

09
Installation
INPUT-1: HDMITM 
terminal
INPUT-2: HDMITM terminalINPUT-3: HDMITM terminal
INPUT-4 terminal: 
D-sub 15 pin
AUDIO INPUT terminal
Speaker terminals (➔ 
page 05)
RS-232C terminal (➔ page 38)
A: Video cable (supplied)
B: Audio cable (supplied)
a: HDMI cable (separately purchased)
b: Component cable (separately 
purchased)
c: Audio cable (separately purchased)d: Video cable (separately purchased)
e: DVI-HDMI cable (separately 
purchased)
f: VGA cable (separately purchased)
g: Audio cable...

Menu LanguageInteractive Plug-in Menu
English(EU)
SetPrevious 2/4
English(US)
Suomi
Français(EU)
Français(US)
Deutsch
Ελληνιά
Magyar
Next English(EU)
10
 Connecting the power cable/Turning on the power
 Power  switch Power cable● Ground the earth plug of the 
power cable to the earth terminal 
of the AC outlet.
● When several kinds of power cord 
are provided in the package, use 
the one which fits your AC outlet.
Power on Power off
Initial settings
When you turn on the monitor for the first time,...

11
Parts identification
Parts identification
 Main  unit
 Power  switch 
(on the rear)Turns on or off the main power supply.
 Power indicator Lights while the monitor is on.
 Remote sensor Aim the remote control here.
 Touch sensor panel
Touch on the function name to operate the function. You hear a beep 
sound when the button is touched.
Turns the monitor on/off (on standby).
INPUTSwitches the input.
MENU 
Opens the setting menu. Functions as the down cursor 
key in the menu operations.
Functions as the...

12
Remote control
POWERTurns the monitor on/off (on 
standby).
LINKOpens the operation window for 
HDMI CEC devices. (➔ page 13)
 OPTIONOpens the setup window of HDMI 
CEC devices.
MENU
Opens the setting menu. (➔ page 
14)
 
(Cursor keys)Selects an item.
OK
Confirms your selection.
BACK
Goes back to the previous screen.
EXIT
Exits from the menu.
 ASPECT
Changes the aspect. (➔ page 30)
VOL +/–
Adjusts the volume.
MUTINGAttenuates the sound.
INPUT 1
Switches the input. INPUT 2
INPUT 3
INPUT 4
● Buttons not...

 Rec.
 Rec.Stop
 NAVIGATION
 Function
Operation Panel
Speaker Device
Operate
Select ExitInput-1
Monitor Link >Recorder
13
Controlling HDMI devices
Controlling HDMI devices
You can control HDMI CEC devices connected to this monitor using the 
remote of the monitor.
● This function can be customized in the “HDMI” settings (➔ page 36).
● Devices may not operate or may function differently from described, 
depending on the model or the manufacturer.
 1  Press the [LINK] button.
Operation window appears.
2...