JVC Dd 8 Instructions

26
Basic operations of disc/file playback
* For the number button usage, refer to “Using the number buttons” on page 17.
■ CAUTION
• Slide the remote control mode 
selector to [AUDIO]. 
This part explains playing back the types of discs 
shown above.
1Press [OPEN/CLOSE 0] on the 
remote control or 
0 on the main 
unit. 
• The disc tray ejects. 
2Place a disc.
• To play back an 8-cm disc, place it on the 
inner hollow of the disc tray. 
3Press [DVD/CD  3]. 
NOTE
• Instead of step 3, you c an use the...

27
Basic operations of disc/file playback
This part explains playing back 1) files recorded on 
the loaded disc, and 2) files recorded on a USB 
mass storage class device connected to the main 
unit. The operation is explained with a display of 
MP3 files as an example. 
NOTE
• When files of different types are recorded on a disc or connected USB mass storage class 
device, select the file type before playback.
(Refer to “FILE TYPE” on page 41.) 
1Prepare the system for file 
playback by following the...

28
Basic operations of disc/file playback
NOTE
• You can also use the buttons on the main unit. 
Repeatedly pressing [SOURCE] can select the 
disc/file as the source, and pressing  3 starts 
playback.
3Press  5    , / , 2  or  3 to select a 
group and track. 
NOTE
• You can also use [GROUP/TITLE SKIP  / ] to  select a group, and the number buttons,  4 or 
¢  to select a track. 
• JPEG files are continuously played back from  the selected file. 
• Display time for a file in slide-show playback is...

29
Basic operations of disc/file playback
■When a disc is played back
■When a disc is stopped
■When a file is played back
■When a file is stopped
• When a WMA/WAV/ASF/DivX file is stopped, 
“WMA”, “WAV”, “ASF” or “DivX” is displayed 
instead of “MP3”, depending on the file type. 
• When an MPEG1/MPEG2 file is stopped, no dis-
play indicates the file type. 
■Changing the display in the display window 
(Only for MP3/WMA files)
For an MP3/WMA file, you can change the display 
in the display window to see...

30
Basic operations of disc/file playback
The indicators light up in the display window to 
show the input signals and the speakers in use.
■When a disc/file is played back 
Press 7. 
When playback is stopped in the middle, playback 
can be started from the stopped position. 
■When a disc/file is played back 
Follow any of the operations below.
*1 “RESUME” is displayed in the display window.
If 
7 is pressed twice, the position where 
playback has been stopped is cleared. 
*2 After this operation, the...

31
Basic operations of disc/file playback
■When a disc/file is played back 
Press  8. 
• Press [DVD/CD  3] or [USB  3] to return to the 
normal playback.
■ When a disc/file is paused 
Press  8 repeatedly. 
There are 2 methods.
■ When a disc/file is played back 
• Press  1 or ¡ . 
- Each time you press  ¡, the speed 
increases. To restore the normal speed, press 
[DVD/CD  3] or [USB  3]. 
• Hold down  4 or ¢ . 
NOTE
• For some discs/files, s ound is intermittent or no 
sound is produced during fast...

32
Basic operations of disc/file playback
■When a disc/file is played back 
Press the number buttons to select 
the chapter number or track number. 
You can skip within a file at approximately 5 minute 
intervals. This is useful especially when you want 
to skip within a long file. 
■When a disc/file is played back 
Press  2 or  3. 
• Each time you press  2 or  3, the playback posi-
tion skips to the beginning of the previous or 
next interval. Each interval is approximately 5 
minutes. 
NOTE
• Intervals...

33
Convenient functions of disc/file playback
* For the number button usage, refer to “Using the 
number buttons” on page 17.
■ CAUTION
• Slide the remote control mode 
selector to [AUDIO].
■When a disc/file is played back
Press the desired button shown below.
• Each time you press the button, the audio lan-
guage, subtitle language or view angle changes.
TV screen (example for the subtitle language)
NOTE
• The audio language, subtitle language and view 
angle can also be changed by pressing 5 or /.
•...

34
Convenient functions of disc/file playback
You can program a maximum of 99 tracks. The 
same track can be programmed more than once. 
■When a disc/file is stopped 
1Press [PLAY MODE] repeatedly to 
display “PROGRAM” in the display 
window. 
Example: Display for a CD 
Example: TV screen for a CD (Program screen) 
2Press the number buttons to pro-
gram tracks. 
Display for an MP3/WMA/WAV file 
• Select a group number, and then a track num-
ber.
 
Display for a VCD/SVCD/CD 
• Select a track number. 
• As...

35
Convenient functions of disc/file playback
■When a disc/file is stopped 
1Press [PLAY MODE] repeatedly to 
display “RANDOM” in the display 
window. 
• Selecting an item other than “RANDOM” 
cancels random playback.
2Press [DVD/CD  3]. 
NOTE
• Each chapter or track is played back only once. 
• Ejecting the disc or turning off the main unit can-
cels random playback. 
■When a disc is played back or paused
1Press [ZOOM]. 
• Each time you press the button, the picture 
magnification changes in the display...