JVC Av 2986se Instructions

19
To register the TV channels automatically 
(AUTO PROGRAM)You can register the TV channels into the TV’s channel list 
automatically.1  Display the INSTALL menu.2  Choose AUTO PROGRAM, then press the MENU/OK button.
  AUTO PROGRAM function starts, and the channels received are 
registered in the channel list (PR LIST) automatically.3  The EDIT menu appears.To edit the channel list Proceed to Step 3 of “To edit the channel list 
(PR LIST)” on page 20.
If a channel is not 
registeredProceed to Step 3 of...

20
To add in the new channel
(INSERT in the EDIT menu)You can add in new channels in the TV channel list as you like.
You need to fi nd the “CH/CC” number for the TV channel. Find the 
“CH/CC” number corresponding to the channel number of the TV 
channel from “CH/CC number list” on page 21.1  Display the INSTALL menu.2  Choose EDIT/MANUAL, then press the MENU/OK button. 
  EDIT menu appears.3  Choose the PR number for which you will register a new TV 
channel. When you add a new TV channel of NTSC-M...

21
TV channel presetting (continued)CH/CC numberWhen you want to use the INSERT function 
on page 20, find the CH/CC number 
corresponding to the channel number of the 
TV channel from this table.Channel No. Country
US United States, Philippines, etc..
CCIR
Middle East, Southeast Asia, etc..
OIRT Eastern Europe, Russia, Vietnam, 
etc..
AUSTRALIA Australia, etc..
Channel
CC US CCIR OIRT AUSTRALIA
CC 18 E S-18
CC 19 F S-19
CC 20 G S-20
CC 21 H S-21
CC 22 I S-22
CC 23 J S-23
CC 24 K S-24
CC 25 L S-25
CC 26...

22
V
L
R R L
/
MONO Y
C
BCR/
V
V SOVERL
R/
MONOOUTPUT VIDEO-1COMPONENT
(VIDEO-2)
INPUT INPUT
The illustrations shown in this section are for AV-2156BE and AV-
2988SE, which are used for explanation purpose. Your TV may not 
look exactly the same as illustrated.
Before connecting
•  Read the manuals provided with the devices for the proper 
connection.
•  Turn off all the devices including the TV.
•  Note that connecting cables are not supplied.Connecting to front video input terminalsAdditional...

23
TroubleshootingIf a problem occurs when you are using the TV, check the below 
troubleshooting guide before calling for repair.
• Colour patches appear 
at the corner of the 
screen
• This may due to the magnetized device such as a 
speaker near to your TV. Keep the device apart from 
your TV. Alternately, you can also use the magnetic-
shielded speaker.
•  Picture is tilted
• This may due to the earth magnetism. Refer to 
“PICTURE TILT” on page 11 to correct the tilt.
•  Image takes a short 
period...

© 2006 Victor Company of Japan, Limited0506-FLE-JMTSpecifi cationsTV RF systems
  B, G, I, D, K, M
Colour systems
  PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Receiving channels
  VHF low channel (VL), VHF high channel (VH), UHF channel (U)
  Receives cable channels in mid band, super band and hyper band.
Power requirements
  For AV-25, AV-29 series:   AC 220 to 240 V, 50 Hz / 60 Hz
  For AV-21 series:   AC 110 to 240 V, 50 Hz / 60 Hz
External input / output
  VIDEO-1:  S-video input, VIDEO input, AUDIO L/R...

INSTRUCTIONS
GGT0116-001A-H
AV-29BS26 AV-21BS26
AV-29BX16 AV-21BX16
AV-29MS26 AV-21BX16B 
AV-29MX16 AV-21MS26 
AV-29MX56 AV-21MX16 
AV-29MX76 AV-21MX56 
AV-29SS26 AV-21MX76
AV-29SX56
AV-29SX76 
 
AV-25MS26 
AV-25MX16 
AV-25MX56 
AV-25MX76 COLOUR  TELEVISION 
EQUALIZER • CINEMA SURROUND • COMPONENT INPUTContentsKnowing your TV’s features .......................................................3
Remote control buttons and basic functions ..............................4
TV buttons and functions...

2
15 cm
 10 cm  10 cm 15 cm
WARNING:  TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE 
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: T O  ENSURE PERSONAL SAFETY, OBSERVE THE 
FOLLOWING RULES REGARDING THE USE OF THIS TV.
1  Operate only from the power source indicated on the rear of the TV.
2  Avoid damaging the power cord and mains plug. When unplugging the 
TV, grasp the mains plug. Do not pull on the power cord.
3  Never block or cover the ventilation openings.
  Never install the TV where good...

3
Knowing your TV’s features
4
1
2
3
EXIT
5
Confi rm your TV’s functions
Some functions written in this instruction manual may not be available for your TV.
Please see the chart below and check the functions that are equipped for your TV’s model number. 
The model number is indicated at the rear of your TV. When you press a button concerned to a function that is not available 
for your TV, it does not work and the logo “Ø” appears on the screen.NO.Model No.
Function
AV-29BS26
AV-29BX16
AV-29MX16...

4Remote control buttons and basic functions
1
6
3
7
9
5
8
2
!
4
EXIT

 No. Press To
1POWER Turn on or off the TV from standby mode.
2MENU/OK Display menu and confi rm selected function.
35 / ∞ / 2 / 3Select and adjust menu function.
4CHANNEL -/+ Select the desired channel number.
5VOLUME -/+ Adjust the volume level.
6TV/VIDEO
EXITSelect TV or video terminal input.
On the other hand, you can use this button to EXIT from the menu.
7MUTING Turn off the volume.
Press this button again to resume the volume....