JVC Av 2105we Instructions

							GGT0085-001A-H
COLOUR TELEVISION
MODEL WITH THE TELETEXT FUNCTION
AV-21F24
MODEL WITHOUT THE TELETEXT
FUNCTION
AV-1407AE
AV-1407FE
AV-21L14
AV-2105WE
AV-2105YE
AV-2107CE
AV-2107TE
AV-2107WE
AV-2107YE
Contents
Knowing your TV’s features..........................
2
Remote control buttons and basic functions.
3
TV buttons and functions..............................
5
Setting up your TV........................................
6
Basic setting for picture.................................
8
Advanced setting for picture.........................
9
Original features for picture...........................
9
Basic setting for sound................................
10
Advanced setting for sound........................
10
Favorite channel and video setting.............
11
Customized setting.....................................
12
TV channel presetting.................................
13
Additional preparation.................................
15
Troubleshooting..........................................
15
Specifications................................
Back cover
INSTRUCTIONS
 GGT0085-001A-H_E_Cover 3/10/05, 10:5921
 
						

							2
Safety Instructions
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING
RULES REGARDING THE USE OF THIS TV.
1Operate only from the power source indicated on the rear of the TV.
2Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the
mains plug. Do not pull on the power cord.
3Never block or cover the cabinet ventilation
openings. Never install the TV where good
ventilation is unattainable. When installing
this TV, leave spaces for ventilation around the
TV more than the minimum distances as
shown in the diagram.
4Do not allow objects or liquid into the cabinet
openings.
5In the event of a fault, unplug the unit and call a JVC service technician.
Do not attempt to repair it yourself or remove the rear cover.
6The surface of the TV screen is easily damaged. Be very careful with it when handling
the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it
forcefully. Never use any cleaner or detergent on it.
7If you are not going to use this TV for a long period of time, be sure to disconnect the
AC plug from the AC socket.
8The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
15 cm
10 cm
15 cm 10 cm
Knowing your TV’s features
Main features
Function Description
*TeletextYou can view teletext programmes which are broadcasted by some TV channels.Teletext programme is an information in text form.Favorite CH (Channel)You can register up to four favorite channels for quick re-call with one-press.
AI VolumeTV adjusts automatically the volume to the same level for all TV channels to
avoid sudden change of the volume when selecting different TV channel.
VNRYou can reduce the picture noise when viewing noisy TV programmes or video
sources.
White balanceYou can choose one of three tones of white to match to  the video source such
as movie, sports, etc. Changing White balance affects the appearance of all other
colours on the screen.
Child lockTo prevent accidental operation by your children, you can disable the control
buttons on the TV.
* The Teletext function is available for AV21F24 only.
The other models do not have the Teletext function. Please check your TV’s model
number. The model number is indicated at the rear of your TV.
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual
throughly before you begin.
 GGT0085-001A-H_E_P02-15 3/10/05, 11:002
 
						

							3
3
2
86
7
9
5
1
4
0
1
9
2
3
7
5
0
4
6
8
Remote control buttons and basic functions
RM-C1260WITH THE TELETEXT FUNCTION(AV-21F24)
RM-C1261WITHOUT THE TELETEXT FUNCTION(AV-1407AE/AV-1407FE/AV-21L14/
AV-2105WE/AV-2105YE/AV-2107CE/
AV-2107TE/AV-2107WE/AV-2107YE)
No. Press To1POWER Turn on or off the TV from standby mode.2MENU/OK Display menu and confirm selected function.35/∞/2/3Select and adjust menu function.4CHANNEL MSelect the desired channel number.5VOLUME MAdjust the volume level.6TV/VIDEO Select TV or VIDEO terminal input.7MUTING Turn off the volume. Press this button again to resume the volume.
8DISPLAY Display the programme number or video terminal number and PR list (channel
/BACK list) on the screen. You can select the channel using the PR list.
1Press the DISPLAY button once to display the PR list.
2Press 5/∞/2/3 button to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite
channels are indicated with coloured mark.
On the other hand, you can use this button to return to the previous menu.
90~9, -/-- Select the programme number. For two digits programme number, press -/--,
then press the number button.
0RETURN,a) Return to the frequently view channel with one touch.
1Choose the channel you want to register.
2Press and hold RETURN, button until “RETURN PLUS PROGRAMMED!”
appears.
To cancel, press and hold RETURN, button until “RETURN PLUS CANCELED!”
appears.
b) Return to the previously viewed channel, if you have not set or have
cancelled the Return channel as above.
 GGT0085-001A-H_E_P02-15 3/10/05, 11:003
 
						

							4
Remote control buttons and basic functions (continued)
How to operate menus and menu locations
TO Operation Note
Display the MENU. Press the MENU/OK button 2.To exit the MENU, press the
DISPLAY/BACK button* 8 or
choose EXIT menu.
Display the top menu. Press 5/∞buttons 3 to choose a menu title. Press ∞ button 3 to display the
Then press MENU/OK button 2.next page for more functions.
Display the 2nd menu. Press 5/∞buttons 3 to choose a menu title.
Then press MENU/OK button 2.
Display the 3rd menu. Press 5/∞buttons 3 to choose a menu title.
Then press MENU/OK button 2.
Return to the previous Press the DISPLAY/BACK button* 8.–
menu.
Choose the setting of Press 5/∞buttons 3 to choose a function. Press the MENU/OK button 2 to
a function. Then press the 2/3 buttons 3 to change the exit from the menu.
setting.
Adjust the effect level Press 5/∞buttons 3 to choose a function.
of a function. Then press the 2/3 buttons 3 to adjust the
effect level.
Display the sub menu Press 5/∞buttons 3 to choose a function.
of a function. Then press MENU/OK button 2 to display –
the sub menu.
The following chart shows locations of functions in menus.
In this manual, location of a function is described as follows:
MENUTop menu2nd menu
MENUTop menu2nd menu
3rd menu
Note: Some functions have the 4th menus as the sub-menus.
*To exit the menu, the on screen display will show BACK indicated in blue. But it doesn’t refer to the
blue button on the remote control. Instead, it refers to the DISPLAY/BACK button on the remote control.
Top menu 2nd menu Location 3rd menu Location
MENU INPUT EXT. INPUT P.12 - -
DISPLAY P.12 - -
PICTURE PICTURE MODE P.8 - -
PICTURE SETTING P.8 - -
WHITE BALANCE P.8 - -
PICTURE FEATURES - VNR P.12
FAVORITE CH SETTING P.11
VIDEO SETTING P.11
COLOUR SYSTEM P.8
SOUND AI VOLUME P.10 - -
FEATURES OFF TIMER P.12 - -
CHILD LOCK P.12 - -
INSTALL AUTO PROGRAM P.13 - -
EDIT/MANUAL P.13 DELETE, MOVE, MANUAL, INSERT P.13
LANGUAGE P.12 LANGUAGE P.12
BLUE BACK P.9 - -
AUTO SHUTOFF P.12 - -
TEXT LANGUAGE P.9 TEXT LANGUAGE P.9
EXIT - - - -
* If you want to
adjust
PICTURE
SETTING
menu, you must
set PICTURE
MODE menu to
USER.
 GGT0085-001A-H_E_P02-15 3/10/05, 11:004
 
						

							5
TV buttons and functions
The following illustrations are for AV-1407FE and AV-1407AE only, which are used for
explanation purpose. Your TV may not look exactly like the illustrated.
Front of the TV
AV-1407FE
AV-1407AE
Rear of the TV
AV-1407FE AV-1407AE
OK MENU
CHANNELVOLUME
VIDEO    AUDIOIN (VIDEO-2)
97421865
No. Button/terminal Description1I(main power) Press to turn on or turn off the TV’s main power.
2Power lamp Indicate the TV is being turned on or off.
No colour : TV’s main power is being turned off.
Red : TV’s main power is being turned on.3TIMER lamp Lights when the TV is in the OFF TIMER mode.4Remote control sensor5VOLUME MPress to adjust the volume level.6CHANNELMPress to select the desired channel.7MENU Press to display the menu.8IN (VIDEO-2) Video and audio input jacks for VIDEO-2 mode.9Headphone jack.0Aerial socket.-OUTPUT Video and audio output jacks.=VIDEO-1 INPUT Video and audio input jacks for VIDEO-1 mode.
How to operate the menus with the TV button
Work as same as the button on the
TV button
remote control unitNote
MENU MENU/OK button To display main menu and exit
menu after finish setting.CHANNEL M∞/5 button To select menu function.VOLUME M2/3 button To adjust the desired function.
MENU
OKVIDEO    AUDIO
IN (VIDEO-2)
974321865
VIDEO
AUDIO
0 - =
VIDEO -1
INPUTOUTPUT
VIDEO
AUDIO
VIDEO -1
INPUTOUTPUT
0 - =
 GGT0085-001A-H_E_P02-15 3/10/05, 11:005
 
						

							6
Setting up your TV
CAUTION
• Turn off the equipment including the TV before connecting.
1Connecting the aerial
To install rod aerial
Install into the top-rear aerial holder. Once installed, it cannot be removed.
VIDEO
AUDIO
VIDEO -1
INPUTOUTPUT
If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV
with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of
the TV with the video cable and audio cables. For details, see the manual of your VCR.
VHF/UHF outdoor aerialindoor aerial
Rod aerial*
Aerial holder
VIDEO
AUDIO
VIDEO -1
INPUTOUTPUT
To RF 
outputTo audio/video output
To aerial input
The illustration shown is just a sample. It may
not be same as your TV.
2Connecting the compatible main plug
to the AC outlet.
3Inserting batteries into the remote
control.
Insert two batteries by following the ª and
· polarities and inserting the · end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work
properly, fit new batteries. The supplied
batteries are for testing, not regular use.
4Turn on the TV by pressing the main
power button.
JVC logo appears on the screen.
Rear of the TV
VHF/UHF outdoor aerial
Rear of the TV
VCR
* For model 14” series only
 GGT0085-001A-H_E_P02-15 3/10/05, 11:006
 
						

							7
Setting up your TV (continued)
5Making the initial settings
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by
following the steps as below:

  
	


	
7

	 	
• Press the red button to cancel the SETUP
TOUR RESTART function.
If you want to make initial settings again
when the next time you turn on the TV,
press the MENU/OK button to activate the
SETUP TOUR RESTART function.
≠
EDIT
PR   CH/CC
 7   CH 09 
 8   CH 11
 9 CH 13 
 10  
 11 
 12  
 13  
3■
•Proceed to edit the channel list (PR list).
For details, see page 13.



	
êìëëäàâ

ìäêA
HCúKA
•Press 5/∞ button to select your desired
language.*
≠


 	

	


	


	

•Press 5/∞ button to select your desired
Teletext language group.
For details, see page 9.
(For AV-21F24 only)
≠


 
	

 



•TV will start searching for the channels.
To stop AUTO PROGRAM, press MENU/OK
button.
•If the JVC logo does not appear, use LANGUAGE, TEXT LANGUAGE, and AUTO
PROGRAM functions to make the initial settings.
Those functions are located in the INSTALL menu.
•If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO
button to exit from initial settings.
*For AV-21F24 and AV-21L14 you can select your desired language as follow ENGLISH/
РУССКИЙ//MELAYU/INDONESIA
 GGT0085-001A-H_E_P02-15 3/10/05, 11:007
 
						

							8
Basic setting for picture
COLOUR SYSTEM
You can select the appropriate colour system
when the picture is not clear or no colour
appears.
Press the COLOUR SYSTEM button to select a
setting.
In TV mode:
AUTOPALSECAM
In VIDEO mode:
AUTOPALSECAM
NTSC3.58 NTSC4.43
To operate this function with a menu:
❇
MENUPICTUREPICTURE FEATURES
COLOUR SYSTEM
For the colour system in each country or region,
see the table below:
Area Country or Region SystemBahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc.
PA L
Indonesia, Malaysia, Singapore,
Asia, Middle Thailand, India, etc.East China, Vietnam, etc. PALHong Kong, etc. PAL
Islamic Republic of Iran, Lebanon,
SECAM
Saudi Arabia, etc.Philippines, Taiwan, Myanmar, etc. NTSCRussia, etc. SECAM
EuropeCzech Republic, Poland, etc. PALGermany, Holland, Belgium, etc. PALUK, etc. PALOceania Australia, New Zealand, etc. PALRepublic of South Africa, etc. PALAfrica Nigeria, etc. PAL
Egypt, Morocco, etc. SECAM
PICTURE MODE
You can choose the desired picture setting with
one-touch.
Press the PICTURE MODE button to select a
setting.
SOFT Softens contrast and sharpness.BRIGHT Heightens contrast and sharpness.STANDARD Standard picture setting.
USER You can change this picture setting
as you like.
Select USER and adjust following
items in the PICTURE SETTING menu.
(CONTRAST, BRIGHT, SHARP, COLOUR,
TINT*)
*TINT can only be adjusted in NTSC system.
To operate this function with a menu:
❇
MENUPICTUREPICTURE MODE
To return the USER setting to the default, press
the blue button when the PICTURE SETTING
menu appears.
Adjusting the picture - USER
You can adjust the desired picture setting when
selecting USER in PICTURE MODE.
1Select the USER in PICTURE MODE under
PICTURE menu.
❇ 
USER
MENUPICTUREPICTURE MODE
2Select the PICTURE SETTING in PICTURE
menu, then adjust the setting.
❇ 
MENUPICTUREPICTURE SETTING
CONTRAST2 : Lower contrast3 : Higher contrast
BRIGHT2 : Darker3 : BrighterSHARP2 : Softer3 : HigherCOLOUR2 : Lighter3 : DeeperTINT*2 : Reddish3 : Greenish*TINT can only be adjusted in NTSC system.
WHITE BALANCE
You can change the white balance of the picture
to better match the type of video being viewed.
Select the WHITE BALANCE in the PICTURE
menu, then choose the desired setting.
❇
MENUPICTUREWHITE BALANCE
NORMAL Normal white balance.COOL Bluish white.WARM Reddish white.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
 GGT0085-001A-H_E_P02-15 3/10/05, 11:008
 
						

							9
Advance setting for picture
BLUE BACK
You can set the TV to automatically change to a
blue screen and mute the sound if the signal is
weak or absent, or when there is no input from
an antenna.
Select the BLUE BACK in the INSTALL menu,
then choose ON or OFF.
Original features for picture
TELETEXT (AV-21F24 only)
You can watch the Teletext broadcast channel
with TEXT function.
1 Press the TEXT button to select the
desired mode as follows:
TV mode  TEXT mode
MIX mode  
2Press the CHANNEL -/+ buttons, number
buttons or colour buttons to select other
Teletext pages.
3Press TEXT or TV/VIDEO button to return
to TV mode.
You can also operate the teletext using the
following buttons:
55 (Hold) Hold a teletext page.
The 55 (Hold) are displayed at the top
left of the screen.
To cancel, press 55 (Hold) button again. (Reveal) Display the hidden text (e.g. answers to a
quiz).
To cancel, press  (Reveal) button again.55 (Size) Enlarge the teletext display.
 (Index) Return to the index page instantly.
 (Cancel) Watch TV programme while waiting for a
teletext page.
When the teletext page is found, a  page
number appears at the upper left of the
screen.
Press  (Cancel) to view the teletext page. (Sub-page) Operate the  (Sub-page) function.
Sub-page numbers are displayed at the
left of the screen.
To cancel sub-page function, press 
(Sub-page) button again.
Using the List mode
You can store and recall the favorite teletext
pages in memory using the colour buttons.
1In TEXT mode, press the MODE button to
enter the List mode.
❇MENUINSTALLBLUE BACK
If you wish to continue viewing the poor picture,
cancel the BLUE BACK function.
2Press a colour button, then press the
number buttons to enter the page number.
3Press and hold down the 
 (Store)
button. The page number is blinking white
to indicate that they are stored in memory.
4To store other favorite teletext pages,
repeat Step 2 to 3.
To recall the favorite teletext page, press the
MODE button, then press the colour button.
To exit the List mode, press the MODE button
again.
When viewing teletext programme, menu
operations are not available.
If characters on a teletext programme do not
appear properly, change the TEXT LANGUAGE
setting.
TEXT LANGUAGE
You can set the Teletext language group that
corresponds to the programmes.
Select TEXT LANGUAGE in the INSTALL menu,
then choose the desired language group.
❇
MENUINSTALLTEXT LANGUAGE
GROUP- 1 English, German, Swedish / Finnish /
Danish / Hungarian, Italian, French,
Spanish / Portuguese, Turkish
GROUP- 2 Polish, German, Estonian, Slovenian,
Czech / Slovakian, Rumanian
GROUP- 3 Polish, German, Estonian, Lettish,
Russian, UkrainianDepending on the broadcast, the language set
may not display properly.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
 GGT0085-001A-H_E_P02-15 3/10/05, 11:009
 
						

							10
Basic setting for sound
Advanced setting for sound
SOUND SYSTEM
You can select an appropriate sound system when
abnormal sound  occurs even when the picture
appears normally.
Press the SOUND SYSTEM button to select a
setting.
B/GID/K
The function is not available in video mode.
For the sound system in each country or region,
see the table below:
Area Country or Region SystemBahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc. B/G
Indonesia, Malaysia, Singapore,
Asia, Middle Thailand, India, etc.East China, Vietnam, etc. D/KHong Kong, etc. I
Islamic Republic of Iran, Lebanon,
B/G
Saudi Arabia, etc.Philippines, Taiwan, Myanmar, etc. MRussia, etc. D/K
EuropeCzech Republic, Poland, etc. D/KGermany, Holland, Belgium, etc. B/GUK, etc. IOceania Australia, New Zealand, etc. B/GRepublic of South Africa, etc. IAfrica Nigeria, etc. B/G
Egypt, Morocco, etc. B/G
AI VOLUME
You can adjust the volume of all the channels
and video inputs to the same level automatically.
Select the AI VOLUME in SOUND menu, then
choose ON or OFF.
❇
MENUSOUNDAI VOLUME
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
 GGT0085-001A-H_E_P02-15 3/10/05, 11:0010