JBL On Stage 4 Manual

Owner’s Manual
JBl  On s tage
®*
 I V
speaker dock for iPod/iPhone 

2
IMpOrtant safety InstructIOns
  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions. 
  5. Do not use this apparatus near water.
  6. Clean only with dry cloth.
  7.  Do  not  block  any  ventilation  openings.  Install  in 
accordance with the manufacturer’s instructions.
  8.   Do not install near any heat sources such as radiators, 
heat  registers,  stoves,  or  other  apparatus  (including 
amplifiers) that produce heat.
  9.   Do  not...

3
www.jbl.com
English
JBl On stage®* IV easy setup guIde
1.   
Carefully  unpack  your  speaker  dock  and  confirm  that  all  the  items 
shown  here  are  included:  JBL  On  Stage®*  IV  Speaker  Dock,  power 
supply, remote control and iPod/iPhone adapter. Notes on battery use: 
  If  you  are  using  rechargeable  batteries,  make  sure  that  all  of  them 
•	
are fully charged before inserting them. The JBL On Stage IV will not 
charge rechargeable batteries.
    If you are using conventional...

4
5.  Connect a USB Type Mini B cable (not included) to the JBL On Stage 
IV’s USB port and to a USB port on the computer on which your iTunes 
is located. I
mpo RtAN t: If you play audio through a docked i pod/i phone and 
an audio source connected to the Audio In connection at the same 
time, you will hear 
both of their outputs mixed through the JBl  on 
stage  IV.  to  hear  only  one  source  you  will  need  to  manually  turn 
off the source you do not want to hear.
6.    If  you  are  going  to...

5
www.jbl.com
English
8.   
Place the appropriate iPod/iPhone adapter into the JBL On Stage IV’s 
iPod well and place your iPod/iPhone on the docking connector. Make 
sure the iPod/iPhone is inserted all the way onto the connector. 9.  
Press the JBL On Stage IV’s On/Off button. The unit’s Status LED will 
glow white when the system is on.
10.   Adjust the volume using the (+) and (–) buttons. Press both buttons to 
mute the sound; press either button to unmute the sound.
NOTE: If applicable, use the...

6
reMOte cOntrOl ButtOns
* iPod touch and iPhone menu navigation may require you to 
manually put the iPod/iPhone in music mode.
Volume Up
Volume Down
Menu Scroll Down
Menu Select/Enter Mute/Unmute
Menu Scroll Up Menu
Play/Pause*
Previous/Rewind  
(Hold for rewind) Next/Fast Forward
 
(Hold for fast forward) Your  JBL  On  Stage  IV’s  LED  will  display  different  colors  to  indicate  the 
unit’s status:
status led
led display
state
White – Constant JBL On Stage IV is on
White – Flashing JBL On Stage...

7
www.jbl.com
English
synchrOnIzIng wIth it unesOperatIng yOur JBl On stage IV On 
Battery pOwer
ipod/iphone chargIng
NOTE:  Before  attempting  to  synchronize  your  iPod/iPhone  with  iTunes, 
be sure that both your iPod/iPhone and iTunes are updated to the latest 
software version.
Before attempting to synchronize, be sure that the JBL On Stage IV’s USB 
port is connected to the computer on which your iTunes is located. 1.   Place  your  iPod/iPhone  on  the  JBL  On  Stage  IV’s  docking 
connector....

8
prOBleMsOlutIOn
No sound (white led is not illuminated): •		Make	sure	that	the	power	supply	is	properly	connected	to	the	JBL	On	Stage	IV	and 	
to a working AC outlet.
•		 If	you’re	using	battery	power,	replace	all	six	batteries	with	brand-new	disposable	or 	
freshly charged rechargeable batteries. The LED will glow amber if the batteries need 
replacing.
•		 The	JBL	On	Stage	IV	is	in	the	energy	conservation	mode	(it	has	detected	no	sound 	
for at least 10 minutes).
No sound (white led is illuminated):...

9
www.jbl.com
English
prOBleM sOlutIOn
maximum volume level is reduced: •		The 	JBL 	On 	Stage 	IV 	is 	in 	battery 	conservation 	mode 	(BCM). 	Switch 	to 	AC 	power 	for	
higher performance.
sound comes from only one speaker: •		Make 	sure 	that 	the 	iPod/iPhone 	is 	properly 	seated 	all 	the 	way 	into 	the 	docking	
connector.
•		 Make	sure	that	the	audio	cable	is	plugged	all	the	way	into	the	Audio	In	jack.
•		 Make	sure	that	the	audio	cable	is	a	stereo	cable. 

10
specIfIcatIOns
Compatibility:Docking versions of the iPod, including iPod nano 5th generation, iPod t\
ouch 2nd generation, iPod 
nano 4th generation, iPod classic, iPod touch 1st generation, iPod nano 3rd generation, iPod nano 2nd 
generation, iPod 5th generation, iPhone 4GB, 8GB, 16GB, iPhone 3G 8GB, 16GB, iPhone 3GS 16GB, 
32GB, MP3 and CD players, desktop and laptop computers (all platforms)\
Transducers: 4 x 1" (25mm) JBL Odyssey
®	full-range	transducers
Power: 10 watts x 2
Frequency...