JBL On Stage 3 Manual

Owner’s Manual
JBl  On s tage
®*
 Micr O iii
Speaker Dock for iPod/iPhone 

2
iMpOrtant safety instructiOns
  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions. 
  5. Do not use this apparatus near water.
  6. Clean only with dry cloth.
  7.  Do  not  block  any  ventilation  openings.  Install  in 
accordance with the manufacturer’s instructions.
  8.   Do not install near any heat sources such as radiators, 
heat  registers,  stoves,  or  other  apparatus  (including 
amplifiers) that produce heat.
  9.   Do  not...

3
www.jbl.com
English
JBl On stage®* MicrO iii easy setup guide
1.   
Carefully  unpack  your  speaker  dock  and  confirm  that  all  the  items 
shown  here  are  included:  JBL  On  Stage®*  Micro  III  Speaker  Dock, 
power supply, remote control and iPod/iPhone adapter. Notes on battery use: 
  If you are using rechargeable batteries, make sure all of them are fully 
•	
charged  before  inserting  them.  The  JBL  On  Stage  Micro  III  will  not 
charge rechargeable batteries.
    If you are using...

4
5.  Connect a USB Type Mini-B cable (not included) to the JBL On Stage 
Micro III’s USB port and to a USB port on the computer on which your 
iTunes is located. I
mpo RtAN t: If you play audio through a docked i pod/i phone and 
an audio source connected to the Audio In connection at the same 
time, you will hear 
both of their outputs mixed through the JBl  on 
s tage  micro III.  to hear only one source you will need to manually 
turn off the source you do not want to hear.
6.    If you are going to...

5
www.jbl.com
English
8.   Place the appropriate iPod/iPhone adapter into the JBL On Stage Micro 
III’s  iPod  well  and  place  your  iPod/iPhone  on  the  docking  connector. 
Make sure the iPod/iPhone is inserted all the way onto the connector.
NOTE: If applicable, use the adapter supplied with your iPod or iPhone. 9. 
  Press  the  JBL  On  Stage  Micro  III’s  On/Off  button.  The  unit’s  Status 
LED will light white when the system is on.
10.   Adjust the volume using the (+) and (–) buttons....

6
reMOte cOntrOl ButtOns
NOTE: iPod touch and iPhone menu navigation may require 
you to manually put the iPod/iPhone in music mode.
Volume Up
Volume Down
Menu Scroll Down
Menu Select/Enter Mute/Unmute
Menu Scroll Up Menu
Play/Pause
Previous/Rewind  
(Hold for rewind) Next/Fast Forward
 
(Hold for fast forward) Your JBL On Stage Micro III’s LED will display different colors to indicate 
the unit’s status:
status led
led display
state
White – Constant JBL On Stage Micro III is on
White – Flashing JBL On...

7
www.jbl.com
English
synchrOnizing with it unesOperating yOur JBl On stage MicrO iii 
On Battery pOwer
ipod/iphone charging
NOTE:  Before  attempting  to  synchronize  your  iPod/iPhone  with  iTunes, 
be  sure  both  your  iPod/iPhone  and  iTunes  are  updated  to  the  latest 
software version.
Before  attempting  to  synchronize,  be  sure  the  JBL  On  Stage  Micro  III’s 
USB port is connected to the computer on which your iTunes is located. 1.    Place  your  iPod/iPhone  on  the  JBL  On  Stage...

8t
rOuBleshOOting yOur JBl JBl On stage MicrO iii
prOBleM
sOlutiOn
No sound (white led is not illuminated): •		Make 	sure 	that 	the 	power 	supply 	is 	properly 	connected 	to 	the 	JBL 	On 	Stage 	Micro 	III	
and to a working AC outlet.
• 		If 	you’re 	using 	battery 	power, 	replace 	all 	four 	batteries 	with 	brand-new 	disposable 	or	
freshly charged rechargeable batteries. The LED will illuminate amber if the batteries 
need replacing.
•		 JBL	On	Stage	Micro	III	is	in	the	energy	conservation	mode...

9
www.jbl.com
English
prOBleM sOlutiOn
maximum volume level is reduced: •		JBL	On	Stage	Micro	III	is	in	Battery	Conservation	Mode	(BCM).	Switch	to	AC	power 	
for higher performance.
sound comes from only one speaker: •		Make 	sure 	that 	the 	iPod/iPhone 	is 	properly 	seated 	all 	the 	way 	into 	the 	docking	
connector.
•		 Make	sure	that	the	audio	cable	is	plugged	all	the	way	into	the	Audio	In	jack.
•		 Make	sure	that	the	audio	cable	is	a	stereo	cable. 

10
specificatiOns
Compatibility:Docking versions of the iPod (including iPod nano 5th generation, iPod \
touch 2nd generation, iPod 
nano 4th generation, iPod classic, iPod touch 1st generation, iPod nano 3rd generation, iPod nano 2nd 
generation, iPod 5th generation, iPhone 4GB, 8GB, 16GB, iPhone 3G 8GB, 16GB, iPhone 3GS 16GB, 
32GB, MP3 and CD players, desktop and laptop computers (all platforms)\
Transducers: 2 x 1" JBL Odyssey
™ full-range
Power: 2 watts x 2
Frequency response: 110Hz – 20kHz...