Insignia NS-46D400NA14, NS-50D400NA14 Led Tv User Guide

37
Insignia 46/50" LED TV
www.insigniaproducts.com
Tu r ni n g o n yo u r  T V  fo r  t h e  
first time
The first time you turn on your TV, the Setup Wizard 
opens. The Setup Wizard guides you through 
setting up basic settings including the menu 
language, time setting, picture mode, TV signal 
source, and the channel list.
To set up your TV:
1Make sure that you have:
• Installed the remote control batteries. (See 
page 36 for details.)
• Connected an antenna, cable TV, or satellite 
TV. (See page...

38
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
13Press S or T to highlight Antenna, Cable, or 
Satellite Box, then press ENTER. 
AIf you select Antenna, your TV scans for 
available channels. The scan may take 
several minutes.BIf you select Cable, a message asks if you 
have a cable box:
• Select No, then press ENTER if no cable 
box is connected. Your TV scans for 
available channels. The scan may take 
several minutes.
• Select Ye s, then press ENTER if a cable box...

39
Insignia 46/50" LED TV
www.insigniaproducts.com
CIf you select Satellite Box, a message asks 
how you connected the satellite box to 
your TV:
•Select HDMI, Component, or AV, then 
press ENTER if you connected a satellite 
box to your TV using one of these cables. 
Read the message, then press ENTER to 
close the wizard.
•Select Coaxial, then press ENTER if you 
connected a satellite box to your TV using 
a coaxial cable. Read the message, then 
press ENTER to start the channel scan (VHF 
analog...

40
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
On-screen menu overview
PICTURE menu (TV mode)
AUDIO menu ( T V mode)
CHANNELS menu (TV mode)SETTINGS menu (TV mode)
PHOTOS menu (USB mode)
Navigating the menus
Notes
• Depending on the signal source 
selected, you may see different 
options on your screen. The following 
menus are shown in TV mode (except 
the Photos menu).
• Menu items that are not selectable are 
grayed out.
• Menus in this manual are described in 
TV...

41
Insignia 46/50" LED TV
www.insigniaproducts.com
Selecting a channel
To select a channel:
• Press CH or CH to go to the next or previous 
channel on the memorized channel list.
• Press the number buttons to enter the channel 
number you want, then wait for the channel to 
change or press ENTER to immediately change 
the channel.
• To select a digital sub-channel, press the number 
buttons to select the main digital channel, press 
(sub-channel), then press the number button 
for the sub-channel....

42
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
•Tint—Adjusts the color balance of the picture. 
Use this control to make skin tones look more 
natural.
•Sharpness—Adjusts the color detail of 
images. If you set this control too high, dark 
images may appear with light or white edges.
•Advanced Video—Opens the 
PICTURE · ADVANCED VIDEO menu where you 
can adjust additional video options.
•Aspect Ratio—Adjusts how the picture 
fills the screen. You can...

43
Insignia 46/50" LED TV
www.insigniaproducts.com
Setting the power on picture mode
You can set the picture mode your TV uses when 
you turn it on.
To set the power on picture mode:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
3Press 
S or T to highlight Reset to Default, then 
press ENTER. The SETTINGS · RESET TO DEFAULT 
menu opens.
4Press 
S or T to highlight Power on in Vivid 
Mode, then press ENTER. 
5Press 
S or T...

44
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
Adjusting the sound
Adjusting sound settings
You can adjust sound settings to improve the sound 
quality. You also can reset all sound settings to the 
factory default.
To adjust sound settings:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight AUDIO, then press T or 
ENTER. The AUDIO menu opens.
3Press 
S or T to highlight an option, then press 
ENTER to access the option. You can select:
•Sound...

45
Insignia 46/50" LED TV
www.insigniaproducts.com
Selecting the audio out mode
If your T V is on when you connect a device into the 
AUDIO OUT/ jack on the side of your T V, a screen 
opens where you select which audio out mode you 
want to use.
To select the audio out mode:
1Connect headphones, an amplifier, a home 
theater system, or a sound bar to the 
AUDIO OUT/ jack on the side of your TV. The 
following screen opens.
2Press 
W or X to highlight the audio out mode 
you want to use, then press...

46
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
Changing channel settings
Automatically scanning for channels
When you scan for channels, your TV searches for 
channels with signals and stores the channel 
information in the channel list. When you press 
CH or CH, your TV goes to the next or 
previous channel in the channel list.
If the TV signal source changes, for example you 
change from an outdoor antenna to cable TV (no 
box), you need to scan for channels.
To...