Home > InFocus > Projector > InFocus Projector X3 User Manual

InFocus Projector X3 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual InFocus Projector X3 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11
    Connecting a computer sourceRequired computer connectionsConnect one end of the provided computer cable (see page 16 for connect-
    ing video devices) to the blue M1 Computer In connector on the projector. 
    Connect the other ends (USB and VESA) to the USB and VGA ports on your 
    computer. If you are using a desktop computer, you will need to disconnect 
    the monitor cable from the computer ’s video port first (you can connect this 
    monitor cable to the Monitor Out connector on the projector, see below). 
    This USB connection allows you to advance slides in a PowerPoint presen-
    tation using the remote. USB drivers must be installed to use the USB fea-
    ture. For more information, see page 15.
    Connect the black power cord to the Pow e r connector on the side of the pro-
    jector and to your electrical outlet.
    NOTE: Always use the power cord that shipped with the projector. Optional computer connections To have sound with your presentation, connect an audio cable (optional 
    cable, not included) to your computer and to the red and/or white Audio In 
    connectors on the projector.
    If you are using a desktop computer and want to see the image on your 
    computer screen as well as on the projection screen, connect the computer ’s 
    monitor cable to the Monitor Out connector on the projector.
    connect computer cable connect power cableconnect audio cableconnect monitor cable 
    						
    							12
    Displaying a computer source image Remove the lens cap.
    Toggle the Pow e r switch on the side of the projector to the On position.
    The LED flashes green and the fans start to run. When the lamp comes on, 
    the start up screen displays and the LED is steady green. It can take a 
    minute for the image to achieve full brightness. 
    ? No start up screen? Get help on page 21.
    Turn on your computer.
    The computer ’s image should appear on the projection screen. If it doesn’t, 
    press the Computer button on the projector ’s keypad. 
    If your computer has Windows 98 as its operating system, see “Using the 
    projector with Windows 98 for the first time” on page 14 regarding the 
    driver setup process.
    Make sure your laptop’s external video port is active. 
    Many laptops do not automatically turn on their external video port when a 
    projector is connected. Usually a key combination like FN + F8 or CRT/LCD 
    key turns the external display on and off. Locate a function key labeled 
    CRT/LCD or a function key with a monitor symbol. Press FN and the 
    labeled function key simultaneously. Refer to your laptop’s documenta-
    tion to learn your laptop’s key combination. 
    ? No laptop image? Try pressing the Auto Image button on the key-
    pad. Get help on page 22. 
    remove lens captoggle Power switchturn on computeractivate laptop’s external port
    FN keymonitor key
    or LCD/CRT key  
    						
    							13
    Adjusting the imageIf necessary, adjust the height of the projector by pressing the release button 
    to extend the foot. 
    If necessary, rotate the leveling foot located at the rear of the projector.
    Avoid placing your hands near the hot exhaust vent in front of the projector.
    Position the projector the desired distance from the screen at a 90 degree 
    angle to the screen. 
    See page 44 for a table listing screen sizes and distances.
    Adjust the zoom or focus.
    If the image is not square, first make sure that the projector is perpendicular 
    to the screen. If the image is larger or smaller on the top or bottom edge of 
    the screen, press the top Key s t o n e button to reduce the upper part of the 
    image, and press the bottom Key s t o n e button to reduce the lower part.
    If the left or right side of the screen is larger or smaller the other, you can 
    turn the projector to the left or to the right a few degrees to square the 
    image.
    Adjust the Contrast or Brightness in the Picture menu. 
    See page 35 for help with these menu adjustments.
    adjust height
    elevator
    foot
    rotate
    leveling
    foot
    release button
    adjust distanceadjust zoom or focus
    focus
    (thin ring)
    (thick ring)zoom
    adjust keystone
    adjust Picture menu 
    						
    							14
    Using the projector with Windows 98 for the first 
    timeThe first time you connect a computer running Windows 98 to the projector, 
    the computer recognizes the projector as “new hardware” and the Add 
    New Hardware Wizard appears. Follow these instructions to use the Wiz-
    ard to load the correct driver (which was installed with your Windows 
    operating system).
    If you are running Windows 2000, Windows ME, or Windows XP, skip these 
    steps and go to “Adjusting the image” on page 13.aClick Next to begin searching for the driver.bMake sure “Search for the best driver” is selected, then click Next.cUncheck any checked boxes, then click Next. Windows automatically 
    locates the driver. If this driver has been removed, reload the driver using 
    your Windows operating system CD.dWhen Windows finds the driver, you are ready to install it. Click Next.
    abcd 
    						
    							15 Skip this page if you did not connect a USB mouse cable
    For Windows 98:
     If you connected the USB cable, the Add New Hardware Wizard 
    appears again. Drivers must be installed to use the USB functionality. 
    The Wizard launches three times. 
    The first time it detects a USB Composite Device. 
    The second time a USB Human Interface Device (for the keyboard). 
    The third time it detects a USB Human Interface Device (for the 
    mouse). 
    For Windows 2000, Windows ME, and Windows XP:
     The USB drivers are automatically installed.  
    						
    							16
    Connecting a video deviceYou can connect video devices such as VCRs, DVD players, camcorders, 
    digital cameras, video game consoles, HDTV receivers, and TV tuners to the 
    projector. There is also an audio input via the red and white A/V connec-
    tors. You can connect the audio directly to the projector to get sound from 
    the built-in speaker, or you can bypass the projector ’s audio system and 
    connect the audio directly from your source to a stereo or home theater sys-
    tem.
    You can connect the projector to most video devices that can output video. 
    You cannot directly connect the coaxial cable that enters your house from a 
    cable or satellite company, the signal must pass through a tuner first. Exam-
    ples of tuners are digital cable boxes, VCRs, digital video recorders, and sat-
    ellite TV boxes. Basically, any device that can change channels is considered 
    a tuner.
    Before connecting your projector, you should decide which aspect ratio you 
    want to use. The projector ’s Aspect Ratio setting is accessed through the 
    projector ’s Picture Menu. See page 35 for more information.What is Aspect Ratio?Aspect ratio is the ratio of the image width to image height. TV screens are 
    usually 4:3, which is the default for this projector. HDTV and most DVDs 
    are 16:9. If you’re projecting onto a screen, the size/shape of the screen may 
    determine which aspect ratio to use. If you are projecting onto a blank wall, 
    you don’t have the screen size restriction. What you plan to project will also 
    help you choose between 4:3 and 16:9. Most TV shows are 4:3, while most 
    movies are 16:9.
    If you have a 16:9 screen then you should select an aspect ratio of 16:9 for 
    anamorphic movies or HDTV, and Native for 4:3 content. If you have a 4:3 
    screen you should still use 16:9 for anamorphic movies or HDTV, but you 
    also have the option of using either 4:3 (to fill the screen) or Native (for 
    direct pixel mapping) for 4:3 content. Keep in mind that anamorphic movies 
    only appear correctly if the DVD player is set to output to a 16:9 television. 
    4:3 screen16:9 screen
    Do Not Use4:3
    mode
    16:9
    mode
    Native
    mode
    (NTSC
    only) 
    						
    							17
    Video device connectionsComposite video connectionPlug the provided A/V cable’s yellow connector into the video-out connec-
    tor on the video device. Plug the other yellow connector into the yellow 
    Video 2 connector on the projector. 
    Plug a white connector into the left audio out connector on the video device 
    and plug a red connector into the right audio out connector on the video 
    device. Plug the remaining white connector into the white audio in connec-
    tor on the projector, and plug the remaining red connector into the red 
    audio in connector on the projector.
    Keep in mind that video output from composite connections is not as high 
    quality as S-video.S-video connectionIf your video device uses a round, four-prong S-video connector, plug an 
    S-video cable (available as an optional accessory) into the S-video connector 
    on your video device and into the S-video connector on the projector. Use 
    the A/V cable’s red and white audio connectors as described directly above 
    (the yellow connectors on the A/V cable are not used).
    Keep in mind that S-video delivers higher quality video output than com-
    posite.
    connect A/V cableconnect S-video and A/V cables  
    						
    							18
    VGA connectionIf your video device has a 15-pin VGA output, plug one end of the included 
    computer cable into the VGA connector on your video source. This connec-
    tor may be labeled “To Monitor” on the video source. Plug the M1 computer 
    end of the cable into the Computer In connector on the projector. Do not 
    plug the USB end of this cable into the video device.
    Use the A/V cable’s red and white audio connectors as described on the 
    previous page (the yellow connectors on the A/V cable are not used).M1 to Component adapterTo connect a progressive scan DVD or HD source, use an M1 to Component 
    adapter (available as an optional accessory). Connect one end of a compo-
    nent cable (not provided) into the adapter. Connect the M1 end of the 
    adapter into the Computer In connector on the projector.
    Connect the power cord to the Pow e r connector on the side of the projector 
    and to your electrical outlet.
    NOTE: Always use the power cord that shipped with the projector. 
    connect computer and A/V cables  connect power cable 
    						
    							19
    Displaying videoRemove the lens cap.
    Toggle the Pow e r switch on the side of the projector to the On position.
    The LED flashes green and the fans start to run. When the lamp comes on, 
    the start-up screen is displayed and the LED is steady green. It can take a 
    minute for the image to achieve full brightness. 
    ? No start up screen? Get help on page 22.
    Plug in and turn on your video device.
    The video device’s image should appear on the projection screen. If it 
    doesn’t, press the Video button on the keypad. 
    ? No image? Try pressing the Source or Auto Image. Get help on 
    page 22.Adjusting the imageAdjust the height of the projector by pressing the release button to extend 
    the foot. 
    Rotate the leveling foot at the rear of the projector, if necessary. 
    Position the projector the desired distance from the screen at a 90 degree 
    angle to the screen. 
    See page 44 for a table listing screen sizes and distances to the screen.
    remove lens captoggle Power switchturn on video deviceadjust height
    elevator
    foot
    rotate
    leveling
    foot
    release button
    adjust distance 
    						
    							20
    Adjust the zoom and focus.
    If the image is not square, adjust the keystone using the buttons on the key-
    pad. If the image is not square, first make sure that the projector is perpen-
    dicular to the screen. If the image is larger or smaller on the top or bottom 
    edge of the screen, press the top Key s t o n e button to reduce the upper part 
    of the image, and press the bottom Key s t o n e button to reduce the lower 
    part. 
    If the left or right side of the screen is larger or smaller the other, you can 
    turn the projector to the left or to the right a few degrees to square the 
    image.
    Adjust the volume on the keypad or remote.
    Adjust the Contrast, Brightness, Color, Tint, or Aspect Ratio in the Picture 
    menu. See page 35 for help with the menus and these adjustments.
    For Aspect Ratio, keep in mind that DVD players must be configured for 
    16:9 in order to view the highest quality image. For more information 
    regarding Aspect Ratio, see page 16.
    adjust zoom and focus
    focus
    (thin ring)
    (thick ring)zoom
    adjust keystoneadjust volumeadjust Picture menu optionsincluding Aspect Ratio 
    						
    All InFocus manuals Comments (0)

    Related Manuals for InFocus Projector X3 User Manual