InFocus Projector Work Big In35w User Manual
Here you can view all the pages of manual InFocus Projector Work Big In35w User Manual. The InFocus manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
20 Using the keypad buttonsMost buttons are described in detail in other sections, but here is an over - view of their functions:power–turns the projector on ( page 7) and off ( page 12). menu–opens the on-screen menus ( page 24). select –confirms choices made in the menus ( page 24). up/down arrows –navigates to and adjust s settings in the menus ( page 24). auto image–resets the projector to the source.presets–cycles through the available preset settings ( page 26). keystone –vertical keystone...
Page 22
21 Using the remote controlThe remote uses two (2) provided AA batteries. They are easily installed by sliding the cover off the remote’s back, aligning the + and - ends of the bat - teries, sliding them into place, and then replacing the cover.Caution: When replacing the batteries, be aware that using batteries other than the type provided with the proj ector may risk severe damage to the remote. When disposing of the batteries , be sure to do so in an environmen - tally proper manner.To operate,...
Page 23
22 Using the audio To play sound from the projector, connect your source to the Audio In con - nector on the projector.To adjust the volume, use the buttons on the keypad.To adjust the balance or turn off the projector ’s chime, use the Audio menu (see page 28). Troubleshooting audioIf there is no sound, check the following: Make sure the audio cable is connected. Make sure mute isn’t active. Make sure the volume is tu rned up enough. Press the Vo l u m e button on the keypad. Adjust the audio...
Page 24
23 Optimizing computer imagesAfter your computer is connected properly and the computer ’s image is on the screen, you can optimize the imag e using the onscreen menus. For gen - eral information on using the menus, see page 24. Adjust the Keystone, Contrast, or Brightness in the Picture menu. Change the Aspect Ratio. See page 25 for details. Adjust the Color Space, Temperature or Control in the Advanced menu. Adjust the Phase, Tracking, or Horizo ntal or Vertical position in the Advanced...
Page 25
24 Using the menusTo open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) The Main menu appears. Use the arrow buttons to move up and down to high - light the desired submenu, then press the Select button. To change a menu setting, highlight it, press Select, then use the up and down arrow buttons to adjust the value, select an option using radio but - tons, or turn the feature on or off using check boxes....
Page 26
25 Picture menuTo adjust the following six settings, highlight the setting, press Select, use the up and down arrows to adjust the values, then press select to confirm the changes.Ke y s t o n e Ve r t i c a l : adjusts the image vertically and makes a squarer image. You can also adjust keystone from the keypad.Ke y s t o n e H o r i zo n t a l : adjusts the image horizontally and makes a squarer image. Contrast : controls the degree of difference between the lightest and darkest parts of the...
Page 27
26 Presets: Presets are provided that optimi ze the projector for displaying computer presentations and video images in different lighting conditions and on different backgrounds. There are also user-definable presets. To set a preset for the current source, adjust the image, select Save Settings in the Presets menu, then select Save User 1 (or 2 or 3). You can recall these settings in the future by selecting the User 1 preset. If you make any adjustments to the imag e, Presets Off will...
Page 28
27 Advanced settingsThe following 4 options are for computer and component sources only. Phase: adjusts the horizo ntal phase of a computer source.Tr a c k i n g: adjusts the vertical scan of a computer source.Horizontal/Vertical Position : adjusts the position of a computer source.Sync Threshold Adjust: (enhanced and high defini tion sources only) If a hardware device, such as a DVD player , is not syncing properly with the projector, select this op tion to help it sync.Overscan: removes noise around...
Page 29
28 Settings menuAudio: allows adjustments to the volume and balance, and turns the projec - tor ’s startup Chime on and off.Sources : allows you to assign a particular input to a specific source key when using an optional remote. Also al lows selection of a default Power-up Source and enables or disables Autosource. Sources>Power-up Source: this determines which source the projector checks first for active video during power-up. Sources>Autosource: When Autosource is not checked, the projector...
Page 30
29 PC Screen Saver Off: prevents your computer from going into Screen Save mode. This feature is only available if the USB portion of the computer cable is connected to your computer ( page 5). Pow e r S av e : automatically turns the lamp of f after no signals are detected for 20 minutes. After 10 additional mi nutes with no signal, the projector powers down. If an active signal is received before the projector powers down, the image will be displayed. Screen Save : automatically blanks the...