InFocus Projector Work Big In3108 Quickstart Manual

							
IN3102   IN3104   IN3106
Quick Start
Regulatory models W3220, W3240 and W3260

English - for other languages, see booklet
Français – voir la brochure
Deutsch – siehe Broschüre
Español – ver folleto
Italiano – vedi opuscolo
Nederlands – zie boekje
Português – consulte livreto
Svenska – se häftet
Русский – см. буклет
한국어 – 소책자참조
中文（简体）– 见手册

P/N 36.8AU04G001-A 
						

							
Please  read  the  safety  instructions  booklet  before  setting  up 
the projector.
1
2
Unpack the box
Here's what's included: 
Put batteries in the remote
The remote uses 2 AA batteries.
Please dispose of batteries in an environmentally proper manner.
Buy a Full-Featured Remote and Other Custom Accessories
www.infocus.com/store

The  top  of  your  projector  includes  a  convenient 
indicator panel with symbols that light up to show 
important status.
For details, see Troubleshooting.
Status Indicator PanelPower/StandbyService Required
High TemperatureReplace Lamp

23
1
+
-
+

Projector with Lens CapRemote
USB CableComputer CablePower Cable

Save the box and packing materials. 
						

							
3
Connect source
Color-coded connections make it easy.
You can connect more than one source if needed.
Got an Apple computer?You may need an adapter. For more information, see How-To Guides at www.infocus.com/support/howto
Connect to: Computer (using DisplayLink)
Connect to: DVD, VCR
1 Connect video using either an S-Video or a Composite Video cable  www.infocus.com/store part no. SP-SVIDEO-10M or SP-CPSTVID-5M
2 Connect video using an HDMI Cable
  Available from A/V dealer or retailer
3 Connect audio using a RCA Audio Cable        Available from A/V dealer or retailer
Connect to: Other kinds of sources
How-To Guides are available at www.infocus.com/support/howto

OR
Computer
USB Cable (included)
OR

Audio Out
L                  RVideo OutHDMI Out

DVD, VCR or HDTV Receiver
Composite Video Cable Good
 BetterS-Video Cable
RCA Audio Cable
HDMI Cable Best
OR
*Also for game console or cable box.

Computer
Computer Cable (included)
Connect to: Computer (using VGA)
OR
For Windows Computers*
Connect the USB cable between your computer and the projector's DisplayLink connector. See the DisplayLink Manager User's Guide for details on compatibility, features, and troubleshooting.
* For the latest information about support for other operating systems (including Apple), go to 
www.infocus.com/support/displaylink
OR 
						

							
4Turn on projector and source
1  Connect the power cord to the projector 
and to an electrical outlet
The power light   on the projector will light amber.
2  Remove the lens cap
3  Turn on the projector
Touch the power light (or press power on the remote).
The power light will start blinking green.
4  Wait for the lamp to warm up
After a few seconds, the power light will stop blinking, and the 
other buttons on the keypad will light up. It can take a minute 
for the lamp to reach full brightness.
Warning: Do not look directly into the lens
when the projector is turned on.

5 Turn on computer or other source
If your computer is connected to the DisplayLink connector, 
follow the instructions on your computer's screen. Otherwise, 
you may need to press a specific key combination to activate 
your laptop's external video port. On most laptops, hold down 
the FN key while pressing a key labeled CRT/LCD, LCD/VGA, a 
monitor icon  , or similar. Key combos for popular models:
Apple F7   Gateway Fn+F3 or Fn+F4   IBM ThinkPad Fn+F7
Dell Fn+F8  HP/Compaq Fn+F4 or Fn+F6   Toshiba Fn+F5
Fujitsu Fn+F10  Sony Fn+F7
Complete laptop activation chart at www.infocus.com/support
Important: If there is still no video, restart your 
computer (first make sure it's connected to the 
projector and the projector is turned on).

ii

6  Change source if needed
If needed, press source (on the projector or remote) to view the 
source. You may have to press it more than once.

Turn over

5-10 sec.

source 
						

							
Adjust the picture
1  Height
1    Hold down the release button 
under the front of the projector.
2    Lift the front of the projector to 
the desired height.
3    Release the button.
2   Keystone
Press the keystone buttons to 
make the picture square.
3   Zoom and focus
Adjust zoom fi  rst, then focus the 
center of the image.
Projector Location
Zoom 
(rear)
Focus 
(front)
As distance increases, the 
image gets larger and moves 
upwards.

Lens center line
Diagonal
Screen Size Distance to Screen
Minimum  Maximum
7'10"/2.4m
10'5"/3.2m 11'8"/3.6m
19'6"/5.9m
60"/1.5m
80"/2.0m 90"/2.3m
150"/3.8m 8'7"/2.6m
11'6"/3.5m
12'11"/3.9m 21'6"/6.6m
Ceiling mount?
To fl  ip the image, turn on the Ceiling 
Mount setting in the Setup menu.
Interactive Screen Size and Distance  Calculator
www.infocus.com/calculator
Buy a Screen and Other Custom  Accessories
www.infocus.com/store
5
IN3102 & IN3104
6'6"/2.0m8'8"/2.7m
9'10"/3.0m 16'4"/5.0m
60"/1.5m
80"/2.0m 90"/2.3m
150"/3.8m 7'4"/2.2m
9'8"/2.9m
10'11"/3.3m 18'1"/5.5m
IN3106

1 2 
						

							
6
7
Using the menus
1  Press menu, then press  or  to review menus.
2  Press select to enter a menu, then press  or  to review settings.
3  Press select to change a setting. If this shows more choices, press 
 or  to update the setting, then press select or menu to save it.
4  Press menu to go back. Press it again to remove the menu.
Note: Most picture settings are disabled (gray) unless a source is being displayed.
Controlling your presentations
Connect the USB cable between your computer and the projector's DisplayLink 
connector (see step 3 ), then press  and  to move through your presentation slides.

Turn off the projector
Press the power button
The power light on the projector will blink while the fan cools 
the lamp. If you need to unplug the projector, wait until the 
fan stops and the power light stops blinking and stays on. 
Note: While the power light is blinking, button presses on the 
projector and remote are ignored.
Register your product
Activate your warranty to ensure eligibility for service and support. 
Get special offers and notifications about free product updates. 
1 Write down your projector's serial number
It's printed on the label on the back of the projector. You'll need it to register (and if 
you ever need to contact support).
Serial number:

2 Go to www.infocus.com/register
Optional: Read the Reference Guide
Download it at www.infocus.com/support
The Reference Guide is available in multiple languages. It covers advanced setup and 
operation, including lamp replacement instructions.

Note: You don't need to install DisplayLink Manager software to use this feature. 
						

							If there is no picture or the picture is blank
If the power light is off, make sure the power cord is connected and plugged into 
a live electrical outlet. If the power light is amber and not blinking, touch the 
power light (or press power on the remote).
Check video source and cables. Make sure the video source (computer, DVD 
player, VCR, etc.) is turned on and cables are securely connected between the 
source and the projector. 
If your computer is connected using DisplayLink (not VGA), please see the 
DisplayLink Manager User's Guide for more troubleshooting information. 
Make sure your computer's video port is enabled. Press the key combination that 
activates your laptop's external video port (see step 4 ). If there is still no image, 
restart your laptop.
Press the Source button. You may need to press it several times to view the 
correct source.
Press the Auto Image button.
If "Signal out of range" is shown, or the picture looks bad
Press the Auto Image button. If that doesn't help (and the source is a computer), 
reduce your computer's display resolution or vertical refresh rate.
If the replace lamp light is on
Turn the projector off and wait at least one minute, then turn it on again. If the 
replace lamp light turns on again, the lamp needs to be replaced. For lamp 
replacement instructions, see the Reference Guide, which can be downloaded at
www.infocus.com/support
Only InFocus genuine lamps are tested for use in this projector.
If the high temperature light is on
Turn the projector off and remove anything that may be blocking the air vents on 
its side. Leave the projector off for at least one minute to let it cool before turning 
it on again. Important: Continuous operation at high temperature may reduce the 
lifetime of the lamp and/or projector. 
If the service required light is on
Turn the projector off and wait at least one minute, then turn it on again. If the 
service required light turns on again, the projector needs to be serviced. See 
below for service contact information. 
Troubleshooting
Warning: In the unlikely event of a lamp rupture, particles may be ejected from the 
projector. Keep out of the area under and around the projector when it is turned on. 
See the safety instructions booklet for more details. 
More troubleshooting options are in the Reference Guide
Download it at www.infocus.com/support
source 
						

							Questions? We’re here to help!
Visit us at:
www.infocus.com/support
We’re here to support you with your new purchase. We can help you with…
•  Determining screen sizes
•  Documentation in other languages
•  Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.)
•  Selecting optional accessories
•  Product warranty protection plans
USA, Canada, Latin America
Customer Support Telephone
+1 (503) 685-8888
TOLL FREE: 800-799-9911
Mon-Fri, 7 am - 5 pm Pacific
[email protected]
Asia PacificCustomer Support TelephoneSingapore: 800-101-1864China: 800.828.2268Australia: 1800-630-957Australia Direct Sales: 1800-885-841New Zealand: 0800-449-854Mon – Fri, 9 a.m. – 5 p.m. [email protected]
Europe, Middle East, Africa
Customer Support Telephone
+31 (0)36 539 2820
Mon-Fri, 08:30 - 18:00 CET
[email protected]
Hg - Lamp contains mercury. Manage in accordance with local disposal laws.
See www.lamprecycle.org
Declaration of ConformityManufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070-8238 USAEuropean Office: Louis Armstrongweg 110, 1311 RL Almere, The NetherlandsWe declare under our sole responsibility that this projector conforms to the following directives and norms: EMC Directive 2004/108/EC, EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3, Low Voltage Directive 2006/95/EC, Safety:  IEC 60950-1:1st Edition.
TrademarksDisplayLink is a trademark of DisplayLink Corporation.Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered trademark of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. DLP® and the DLP logo are registered trademarks of Texas Instruments and BrilliantColor™ is a trademark of Texas Instruments. InFocus, In Focus, and INFOCUS (stylized) are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries.  
FCC WarningNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help.Changes or modifications to this equipment that are not expressly approved by InFocus Corp. may void the user’s authority to operate the equipment.
CanadaThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Agency ApprovalsUL, cULOther specific Country Approvals may apply. Please see product certification label.
Input ratings:  100-240Vac, 3.3 – 1.2A (W3220, W3260), 3.9 – 1.4A (W3240), 50-60Hz
InFocus reserves the right to alter product offerings and specifications at any time without notice.